EN 14869-1:2011

Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)

This European Standard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods.

Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)

Diese Europäische Norm legt eine Scherprüfung zur Charakterisierung von Klebstoffen in einer Klebung fest. Das Schubspannungs-Gleitungs-Verhalten eines Klebstoffes (einschließlich des Schubmoduls) ist für die Auslegung, z. B. bei Finite-Elemente-Methoden, von Nutzen.

Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001, modifié)

La présente Norme européenne spécifie un essai de cisaillement pour la caractérisation des adhésifs dans un
joint. Les caractéristiques contrainte/déformation de l’adhésif en cisaillement (y compris le module de
cisaillement) sont utiles pour des travaux de conception précis, par exemple, dans le cas de méthodes
d’analyse par la méthode des éléments finis.

Konstrukcijska lepila - Določanje strižnih lastnosti konstrukcijskih spojev - 1. del: Torzijski preskus z uporabo čelno lepljenih votlih cilindrov (ISO 11003-1:2001, spremenjen)

Ta evropski standard določa strižni preskus za opredelitev lastnosti lepil v spojih. Strižne lastnosti napetosti/raztezka lepila (vključno s strižnimi moduli) so uporabne za napredno načrtovanje, npr. pri metodah analize končnih elementov.

General Information

• Status: Published
• Publication Date: 10-May-2011
• Withdrawal Date: 29-Nov-2011
• ICS: 83.180 - Adhesives
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 2 - Structural adhesives
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 12-Jul-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14869-1:2011 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)

Relations

• Replaces: EN 14869-1:2004 - Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
• Effective Date: 14-May-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSUHPHQMHQStrukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert)Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001 Modifié)Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 14869-1:2011SIST EN 14869-1:2011en,de01-julij-2011SIST EN 14869-1:2011SLOVENSKI
STANDARDSIST EN 14869-1:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14869-1
May 2011 ICS 83.180 Supersedes EN 14869-1:2004English Version
Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified)
Adhésifs structuraux - Détermination du comportement en cisaillement de collages structuraux - Partie 1 : Méthode d'essai en torsion de cylindres creux collés bout à bout (ISO 11003-1:2001, modifié)
Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprüfverfahren unter Verwendung stumpf verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert) This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14869-1:2011: ESIST EN 14869-1:2011

Terms and definitions EN 13887, Structural Adhesives
Guidelines for surface preparation of metals and plastics prior to adhesive bonding EN ISO 291, Plastics
Standard atmospheres for conditioning and testing (ISO 291:2008) EN ISO 10365, Adhesives
Designation of main failure patterns (ISO 10365:1992) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 923:2005+A1:2008 apply. 4 Principle The shear deformation of the adhesive in an annular bond between two hollow cylinders, and the corresponding torque, are measured and recorded up to failure of the joint. 5 Apparatus 5.1 Torsion-testing machine, with a capacity of at least 300 N·m and preferably of 1 000 N·m. Alternatively, a suitably adapted tensile-testing machine may be used. The machine shall include equipment for recording the torque instantaneously with an error of less than 1 %. The gripping heads shall be accurately aligned and, if no hydraulic gripping mechanism is available, all bolts and holes shall be pre
...