Fixed inductors for electromagnetic interference suppression -- Part 1: Generic specification

Drosseln zur Unterdrückung elektromagnetischer Störungen -- Teil 1: Fachgrundspezifikation

Inductances fixes d'antiparasitage -- Partie 1: Spécification générique

Fiksne dušilke za dušenje elektromagnetnega motenja - 1. del: Rodovna specifikacija (IEC 60938-1:1999/A1:2006)

General Information

Status
Published
Publication Date
04-Nov-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Oct-2007
Due Date
23-Dec-2007
Completion Date
05-Nov-2007

Relations

Buy Standard

Amendment
EN 60938-1:2002/A1:2007
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60938-1:2002/A1:2007
01-december-2007
Fiksne dušilke za dušenje elektromagnetnega motenja - 1. del: Rodovna
specifikacija (IEC 60938-1:1999/A1:2006)
Fixed inductors for electromagnetic interference suppression -- Part 1: Generic
specification
Drosseln zur Unterdrückung elektromagnetischer Störungen -- Teil 1:
Fachgrundspezifikation
Inductances fixes d'antiparasitage -- Partie 1: Spécification générique
Ta slovenski standard je istoveten z: EN 60938-1:1999/A1:2007
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN 60938-1:2002/A1:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60938-1:2002/A1:2007

---------------------- Page: 2 ----------------------

SIST EN 60938-1:2002/A1:2007


EUROPEAN STANDARD
EN 60938-1/A1

NORME EUROPÉENNE
February 2007
EUROPÄISCHE NORM

ICS 29.100.10; 31.020


English version


Fixed inductors for electromagnetic interference suppression -
Part 1: Generic specification
(IEC 60938-1:1999/A1:2006)


Inductances fixes d'antiparasitage -  Drosseln zur Unterdrückung
Partie 1: Spécification générique elektromagnetischer Störungen -
(CEI 60938-1:1999/A1:2006) Teil 1: Fachgrundspezifikation
(IEC 60938-1:1999/A1:2006)




This amendment A1 modifies the European Standard EN 60938-1:1999; it was approved by CENELEC on
2007-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60938-1:1999/A1:2007 E

---------------------- Page: 3 ----------------------

SIST EN 60938-1:2002/A1:2007
EN 60938-1:1999/A1:2007 - 2 -
Foreword
The text of amendment 1:2007 to the International Standard IEC 60938-1:1999, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the formal vote and was approved by
CENELEC as amendment A1 to EN 60938-1:1999 on 2007-02-01 without any modification.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.