Fixed inductors for electromagnetic interference suppression -- Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D

IEC 60938-2-1:1999 is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be taken into account.

Drosseln zur Unterdrückung elektromagnetischer Störungen -- Teil 2-1: Vordruck für Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind - Bewertungsstufe D

Inductances fixes d'antiparasitage -- Partie 2-1: Spécification particulière cadre - Inductances nécessitant des tests de sécurité - Niveau d'évaluation D

L'IEC 60938-2-1:1999 est un document annexe à la spécification intermédiaire qui contient des exigences pour le modèle, la disposition et le contenu minimal des spécifications particulières. Les spécifications particulières qui ne satisfont pas aux exigences peuvent ne pas être considérées comme conformes aux spécifications de la CEI et ne doivent pas être décrites comme telles. Dans la préparation des spécifications particulières, le contenu de 1.4 de la spécification intermédiaire doit être pris en compte.

Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment D (IEC 60938-2-1:1999)

General Information

Status
Published
Publication Date
31-Aug-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002

Relations

Buy Standard

Standard
EN 60938-2-1:2002
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment D (IEC 60938-2-1:1999)Drosseln zur Unterdrückung elektromagnetischer Störungen -- Teil 2-1: Vordruck für Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind - Bewertungsstufe DInductances fixes d'antiparasitage -- Partie 2-1: Spécification particulière cadre - Inductances nécessitant des tests de sécurité - Niveau d'évaluation DFixed inductors for electromagnetic interference suppression -- Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D29.180Transformatorji. DušilkeTransformers. ReactorsICS:Ta slovenski standard je istoveten z:EN 60938-2-1:1999SIST EN 60938-2-1:2002en01-september-2002SIST EN 60938-2-1:2002SLOVENSKI
STANDARD



SIST EN 60938-2-1:2002



SIST EN 60938-2-1:2002



SIST EN 60938-2-1:2002



INTERNATIONALSTANDARDIEC60938-2-1QC 280101First edition1999-10Fixed inductors for electromagneticinterference suppression –Part 2-1:Blank detail specification –Inductors for which safety tests are required –Assessment level DInductances fixes d'antiparasitage –Partie 2-1:Spécification particulière cadre –Inductances nécessitant des tests de sécurité –Niveau d'évaluation DPRICE CODE IEC 1999

Copyright - all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: inmail@iec.ch IEC web site
http://www.iec.chLFor price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical CommissionSIST EN 60938-2-1:2002



– 2 –60938-2-1 © IEC:1999(E)INTERNATIONAL ELECTROTECHNICAL COMMISSION____________FIXED INDUCTORS FOR ELECTROMAGNETICINTERFERENCE SUPPRESSION –Part 2-1: Blank detail specification –Inductors for which safety tests are required – Assessment level DFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organization forStandardization (ISO) in accordance with conditions determined by agreement between the two organizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)
In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60938-2-1 has been prepared by IEC technical committee 40:Capacitors and resistors for electronic equipment.FDISReport on voting40/1112/FDIS40/1138/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.The QC number that appears on the front cover of this publication is the specification numberin the IEC Quality Assessment System for Electronic Components (IECQ).SIST EN 60938-2-1:2002



60938-2-1 © IEC:1999(E)– 3 –The committee has decided that this publication rem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.