Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)

This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is:
– Grade 1: 0,020 mm up to and including 1,600 mm;
– Grade 2: 0,020 mm up to and including 1,600 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 23: Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-23:2013/A1:2019)

Spécifications pour types particuliers de fils de bobinage - Partie 23: Fil brasable de section circulaire en cuivre émaillé avec polyesterimide, classe 180 (IEC 60317-23:2013/A1:2019)

Specifikacije za posebne vrste navijalnih žic - 23. del: Spajkljiva okrogla bakrena žica, prevlečena s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-23:2013/A1:2019)

General Information

Status
Published
Publication Date
03-Oct-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Oct-2019
Due Date
06-Dec-2019
Completion Date
04-Oct-2019

RELATIONS

Buy Standard

Amendment
SIST EN 60317-23:2014/A1:2019
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 60317-23:2014/A1:2019
01-december-2019

Specifikacije za posebne vrste navijalnih žic - 23. del: Spajkljiva okrogla bakrena

žica, prevlečena s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-
23:2013/A1:2019)

Specifications for particular types of winding wires - Part 23: Solderable polyesterimide

enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 23:

Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyesterimid, Klasse 180 (IEC

60317-23:2013/A1:2019)

Spécifications pour types particuliers de fils de bobinage - Partie 23: Fil brasable de

section circulaire en cuivre émaillé avec polyesterimide, classe 180 (IEC 60317-
23:2013/A1:2019)
Ta slovenski standard je istoveten z: EN 60317-23:2014/A1:2019
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
SIST EN 60317-23:2014/A1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60317-23:2014/A1:2019
---------------------- Page: 2 ----------------------
SIST EN 60317-23:2014/A1:2019
EUROPEAN STANDARD EN 60317-23:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2019
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 23:
Solderable polyesterimide enamelled round copper wire, class 180
(IEC 60317-23:2013/A1:2019)

Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von

Partie 23: Fil brasable de section circulaire en cuivre Wickeldrähten - Teil 23: Runddrähte aus Kupfer,

émaillé avec polyestérimide, classe 180 verzinnbar, lackisoliert mit Polyesterimid, Klasse 180

(IEC 60317-23:2013/A1:2019) (IEC 60317-23:2013/A1:2019)

This amendment A1 modifies the European Standard EN 60317-23:2014; it was approved by CENELEC on 2019-07-17. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 60317-23:2014/A1:2019 E
---------------------- Page: 3 ----------------------
SIST EN 60317-23:2014/A1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.