Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures

This European Standard specifies requirements for execution of structural steelwork as structures or as manufactured components, produced from:
-   hot rolled, structural steel products up to and including grade S700;
-   cold formed components and sheeting up to and including grade S700 (unless coming within the scope of prEN 1090-4);
-   hot finished or cold formed austenitic, austenitic-ferritic and ferritic stainless steel products;
-   hot finished or cold formed structural hollow sections, including standard range and custom-made rolled products and hollow sections manufactured by welding.
For components produced from cold formed components, and cold formed structural hollow sections that are within the scope of prEN 1090-4, the requirements of prEN 1090-4 take precedence over corresponding requirements in this European Standard.
This European Standard can also be used for structural steel grades up to and including S960, provided that conditions for execution are verified against reliability criteria and any necessary additional requirements are specified.
This European Standard specifies requirements, which are mostly independent of the type and shape of the steel structure (e.g. buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions. Certain requirements are differentiated in terms of execution classes.
This European Standard applies to structures designed according to the relevant part of the EN 1993 series. Sheet piling, displacement piles and micropiles designed to EN 1993-5 are intended to be executed in accordance with respectively EN 12063, EN 12699 and EN 14199. This European Standard only applies to the execution of waling, bracing, and connections.
This European Standard applies to steel components in composite steel and concrete structures designed according to the relevant part of the EN 1994 series.
This European Standard can be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard includes the requirements for the welding of reinforcing steels to structural steels. This European Standard does not include requirements for the use of reinforcing steels for reinforced concrete applications.

Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln für die Ausführung von Stahltragwerken

Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences techniques pour les structures en acier

Izvedba jeklenih in aluminijastih konstrukcij - 2. del: Tehnične zahteve za izvedbo jeklenih konstrukcij - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
18-Dec-2022
Technical Committee
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
05-Dec-2023
Due Date
23-Jan-2024

Relations

Buy Standard

Draft
EN 1090-2:2018/oprA1:2022
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1090-2:2018/oprA1:2022
01-december-2022
Izvedba jeklenih in aluminijastih konstrukcij - 2. del: Tehnične zahteve za izvedbo
jeklenih konstrukcij - Dopolnilo A1
Execution of steel structures and aluminium structures - Part 2: Technical requirements
for steel structures
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln
für die Ausführung von Stahltragwerken
Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences
techniques pour les structures en acier
Ta slovenski standard je istoveten z: EN 1090-2:2018/prA1
ICS:
91.080.13 Jeklene konstrukcije Steel structures
SIST EN 1090-2:2018/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1090-2:2018/oprA1:2022

---------------------- Page: 2 ----------------------
SIST EN 1090-2:2018/oprA1:2022


DRAFT
EUROPEAN STANDARD
EN 1090-2:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
September 2022
ICS 91.080.13
English Version

Execution of steel structures and aluminium structures -
Part 2: Technical requirements for steel structures
Exécution des structures en acier et des structures en Ausführung von Stahltragwerken und
aluminium - Partie 2: Exigences techniques pour les Aluminiumtragwerken - Teil 2: Technische Regeln für
structures en acier die Ausführung von Stahltragwerken
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 135.

This draft amendment A1, if approved, will modify the European Standard EN 1090-2:2018. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1090-2:2018/prA1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1090-2:2018/oprA1:2022
EN 1090-2:2018/prA1:2022 (E)
Contents Page
European foreword . 4
1 Modification to 2.1.1 . 5
2 Modification to 2.3 . 5
3 Modification to Clause 3. 5
4 Modification to 4.2.1 . 6
5 Modification to 5.2 . 6
6 Modification to 5.3, Table 2 . 6
7 Modification to 6.2 . 6
8 Modification to 6.4.4 . 7
9 Modification to 6.5.1 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.