Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO/FDIS 6224:2024)

This International Standard specifies the requirements for general-purpose textile-reinforced thermoplastics
water-discharge hoses.
Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water
temperature ranges:
— ambient temperatures: −10 °C to +60 °C;
— water temperature during operation: 0 °C to +60 °C.
NOTE At water temperatures above 23 °C and particularly above 40 °C, the maximum working pressure will be reduced.
These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine
inlets, as fire-fighting hoses, for special agricultural machines or as gardening hoses for the consumer market.

Thermoplastische Schläuche mit Textileinlage für allgemeine Anwendungen mit Wasser - Anforderungen (ISO/FDIS 6224:2024)

Dieses Dokument legt die Anforderungen an Kunststoffschläuche mit Textileinlage für allgemeine Anwendungen mit Wasser fest.
WARNUNG — Personen, die das vorliegende Dokument anwenden, sollten mit üblichen Laborverfahren vertraut sein. Dieses Dokument erhebt keinen Anspruch auf Vollständigkeit bei der Angabe von Sicherheitsrisiken, die ihre Anwendung möglicherweise beinhaltet. Es liegt in der Verantwortung des Anwenders, angemessene Arbeitsschutzmaßnahmen zu ergreifen und anwendbare bestehende nationale gesetzliche Vorschriften festzulegen.

Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau - Spécifications (ISO/FDIS 6224:2024)

La présente Norme internationale spécifie les exigences relatives aux tuyaux d'usage général, en matières
thermoplastiques à armature textile pour refoulement d'eau.
Trois types de tuyaux sont spécifiés en fonction de leurs conditions de service, c'est-à-dire leurs plages de
températures ambiantes et de températures d'eau:
— températures ambiantes: −10 °C à +60 °C;
— températures d'eau en service: 0 °C à +60 °C.
NOTE Pour des températures d'eau supérieures à 23 °C et particulièrement supérieures à 40 °C, la pression
maximale de service sera réduite.
Ces tuyaux ne sont pas destinés à être utilisés pour le transport d'eau potable, le raccordement de machine à
laver, comme tuyaux d'incendie, pour les machines agricoles spéciales ou comme tuyaux d'arrosage pour le
marché grand public.

S tekstilom ojačene plastomerne cevi za splošno uporabo vode - Specifikacija (ISO/FDIS 6224:2024)

General Information

Status
Not Published
Public Enquiry End Date
02-Aug-2023
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
01-Feb-2024
Due Date
21-Mar-2024
Completion Date
02-Feb-2024

Relations

Buy Standard

Draft
prEN ISO 6224:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 6224:2023
01-julij-2023
S tekstilom ojačene plastomerne cevi za splošno uporabo vode - Specifikacija
(ISO/DIS 6224:2023)
Thermoplastics hoses, textile-reinforced, for general-purpose water applications -
Specification (ISO/DIS 6224:2023)
Kunststoffschläuche mit Textileinlage für allgemeine Anwendungen mit Wasser -
Anforderungen (ISO/DIS 6224:2023)
Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau -
Spécifications (ISO/DIS 6224:2023)
Ta slovenski standard je istoveten z: prEN ISO 6224
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
83.120 Ojačani polimeri Reinforced plastics
oSIST prEN ISO 6224:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 6224:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 6224:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6224
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-05-12 2023-08-04
Thermoplastics hoses, textile-reinforced, for general-
purpose water applications — Specification
Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau — Spécifications
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 6224:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 6224:2023

DRAFT INTERNATIONAL STANDARD
ISO/DIS 6224
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:

Thermoplastics hoses, textile-reinforced, for general-
purpose water applications — Specification
Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau — Spécifications
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 6224:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 6224:2023
ISO/DIS 6224:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.