iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 8041:2005/AC:2008

(Corrigendum)

Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007)

Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007)

This International Standard specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, periodic verification and in-situ checks, and the specification of vibration calibrators for in-situ checks. Vibration instruments specified in this International Standard can be single instruments, combinations of instrumentation or computer-based acquisition and analysis systems. Vibration instruments specified in this International Standard are intended to measure vibrations for one or more applications, such as ç hand-transmitted vibration (see ISO 5349-1), ç whole-body vibration (see ISO 2631-1, ISO 2631-2, ISO 2631-4), and ç low-frequency whole-body vibration in the frequency range from 0,1 Hz to 0,5 Hz (see ISO 2631-1). Vibration instruments can be designed for measurement according to one or more of the frequency weightings defined within each of these applications. Three levels of performance testing are defined in this International Standard: a) pattern evaluation, i.e. a full test of the instrument against the specifications defined in this International Standard; b) periodic verification, i.e. an intermediate set of tests designed to ensure that an instrument remains within the required performance specification, and c) in-situ checks, i.e. a minimum level of testing required to indicate that an instrument is likely to be functioning within the required performance specification.

Schwingungseinwirkung auf den Menschen - Messeinrichtung (ISO 8041:2005/Cor 1:2007)

Réponse des individus aux vibrations - Appareillage de mesure (ISO 8041:2005/Cor 1:2007)

Odzivanje človeka na vibracije - Merilni instrumentarij (ISO 8041:2005/Cor 1:2007)

General Information

Status
Withdrawn
Publication Date
14-Oct-2008
Withdrawal Date
01-Jun-2017
ICS
13.160 - Vibration and shock with respect to human beings
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Jun-2017
Due Date
25-Jun-2017
Completion Date
02-Jun-2017
Ref Project
EN ISO 8041:2005/AC:2008 - Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007)

Relations

Corrects
SIST EN ISO 8041:2005 - Human response to vibration - Measuring instrumentation (ISO 8041:2005)
Effective Date
01-Dec-2008
Replaced By
SIST EN ISO 8041-1:2017 - Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
Effective Date
31-May-2017
Replaced By
SIST EN ISO 8041-2:2021 - Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
Effective Date
16-Jun-2021
Replaced By
SIST EN ISO 8041-1:2017 - Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
Effective Date
08-Jun-2022
Replaced By
SIST EN ISO 8041-2:2021 - Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
Effective Date
08-Jun-2022
Revised
SIST EN ISO 8041-1:2017 - Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017)
Effective Date
27-Jan-2016
Corrects
SIST EN ISO 8041:2005 - Human response to vibration - Measuring instrumentation (ISO 8041:2005)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 8041:2005/AC:2008EN ISO 8041:2005/AC:2008
PreviousNext
Corrigendum
EN ISO 8041:2005/AC:2008
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schwingungseinwirkung auf den Menschen - Messeinrichtung (ISO 8041:2005/Cor 1:2007)Réponse des individus aux vibrations - Appareillage de mesure (ISO 8041:2005/Cor 1:2007)Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007)13.160Vpliv vibracij in udarcev na ljudiVibration and shock with respect to human beingsICS:Ta slovenski standard je istoveten z:EN ISO 8041:2005/AC:2008SIST EN ISO 8041:2005/AC:2008en,fr,de01-december-2008SIST EN ISO 8041:2005/AC:2008SLOVENSKI
STANDARD



SIST EN ISO 8041:2005/AC:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8041:2005/ACOctober 2008Octobre 2008Oktober 2008ICS 13.160English versionVersion FrançaiseDeutsche FassungHuman response to vibration - Measuring instrumentation (ISO8041:2005/Cor 1:2007)Réponse des individus aux vibrations -Appareillage de mesure (ISO8041:2005/Cor 1:2007)Schwingungseinwirkung auf den Menschen- Messeinrichtung (ISO 8041:2005/Cor1:2007)This corrigendum becomes effective on 1 October 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 1 octobre 2008 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 1.Oktober 2008 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN ISO 8041:2005/AC:2008 D/E/FSIST EN ISO 8041:2005/AC:2008



EN ISO 8041:2005/AC:2008 (E) 2 Endorsement no
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10819:2013/A2:2022(Amendment)
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
EN ISO 10819:2013/A2:2022

2021-10-04 - publication on hold - Received lack of compliance at Enquiry stage.
2021-08-24 - publication on hold - TC decision is missing to skip FV. 2021-10-04 decision received.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-13:2022(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
EN ISO 28927-13:2022

This document specifies a laboratory method for measuring the vibration at the handle of fastener
driving tools. It is a type test procedure for establishing the vibration value on the handle of a handheld power tool operating under a specified load.
This document is applicable to fastener driving tools driven pneumatically or by other means, using
nails, staples or pins.
This document is applicable to tools with single sequential actuation, contact actuation, contact
actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).
This document is not applicable to tools operating in full sequential mode due to their much longer
intervals in between individual actuations. However, to provide an indication for comparison of
different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.
NOTE Today current knowledge does not allow any conclusions regarding physiological and pathological
effects between isolated shocks and continuous shock sequences, and their repetition rates

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8041-2:2021(Main)
Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)
EN ISO 8041-2:2021

This document specifies minimum requirements for personal vibration exposure meters (PVEM).
This document is applicable to instruments designed for measurements of whole-body vibration in the
context of industrial hygiene applications (according to ISO 2631-1, ISO 2631-2 and ISO 2631-4) and/or
hand-arm vibration (according to ISO 5349-1) together with the associated exposure times.
This document provides specified design goals and permitted tolerances that define the minimum
performance capabilities and functional requirements of instruments designed to measure personal
daily vibration exposure.
This document does not apply to instruments designed to measure or log exposure times without also
performing vibration measurement. Instrumentation of this type is described in ISO/TR 19664.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15350:2020(Main)
Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery
CEN/TR 15350:2020

This Technical Report gives guidelines for estimating, assessing and documenting the daily vibration exposure due to the use of hand-held power tools and hand-guided machines, according to the requirements of the European Physical Agents Directive (vibration) 2002/44/EC. This Technical Report is addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial organisations. It helps to establish documentation for specific machinery or work situations and can also be useful for employers.
It follows the method of EN ISO 5349-1 and EN ISO 5349-2 but instead of measuring the vibration magnitudes at the specific workplaces, the methods in this Technical Report use existing vibration values from other sources of information including those provided by the manufacturers of the machinery according to the requirements of the Machinery Directive 2006/42/EC. It is important that the vibration values used in the exposure assessment are representative of those in the specific use of the machinery. Workplace measurements, however, are required if suitable data are not available to represent the vibration under the specific working conditions or if the calculation results do not help to decide whether or not the vibration exposure limit value or exposure action value is likely to be exceeded.
This Technical Report gives guidance on how to estimate the exposure duration and the daily vibration exposure A(8) as defined in EN ISO 5349-1. It also offers a simple method for estimating the daily vibration exposure by means of a table which indicates the vibration exposure as a function of the equivalent vibration total value and the associated exposure duration. Both methods can be used even in cases of multiple exposures on the same day.
Annex A gives guidance for manufacturers and suppliers of machinery concerning information that warns of risks from vibration, which should be reported to the customer.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17506:2020(Main)
Guidance on data bases for human vibration
CEN/TR 17506:2020

The purpose of this technical report is to give guidelines for elaborating databases on human vibration for different purposes (emission or immission) and types of exposure (hand arm vibration or whole body vibration).
This Technical Report is restricted to cases where vibration affects persons at work. It is mainly addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial organizations.
It defines basic requirements to get databanks respecting quality criteria (information to be given regarding exposure, reference standards, machines, persons, key parts, data origin and traceability ...) taken into account the type of exposure (HAV, WBV ...).
Although this report has been mainly designed to facilitate the exchange of data between experts, a section explains the minimum information to be provided and precautions to be taken for databases opened to public. The way the data should be formatted to facilitate the exchange between developers of data bases is covered.
Also this report provides proper terminology to qualify the different families of vibration sources e. g. tools, machines and working conditions (see annex B). This technical report provides a method for classifying the quality of vibration data.

  • Technical report
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7096:2020(Main)
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)
EN ISO 7096:2020

1.1 This document specifies, in accordance with ISO 10326-1:2016, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines.
1.2 This document is applicable to operator seats used on earth-moving machines as defined in
ISO 6165.
1.3 This document defines the input spectral classes required for the following earth-moving machines.
Each class defines a group of machines having similar vibration characteristics:
— rigid-frame dumpers >4 500 kg operating mass;
— articulated-frame dumpers;
— scrapers without axle or frame suspension1);
— wheeled loaders >4 500 kg operating mass;
— graders;
— wheeled dozers;
— soil compactors;
— backhoe loaders;
— crawler dumpers;
— crawler loaders;
— crawler-dozers ≤50 000 kg operating mass2);
— compact dumpers ≤4 500 kg operating mass;
— wheeled compact loaders ≤4 500 kg operating mass;
— skid-steer loaders, wheeled ≤4 500 kg and tracked ≤6 000 kg operating mass.
1.4 The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration:
— excavators, including walking excavators and cable excavators3);
— trenchers;
— landfill compactors;
— non-vibratory rollers, except soil compactors;
— vibratory rollers, except soil compactors;
— pipelayers;
— horizontal directional drills (HDD).
1.5 The tests and criteria defined in this document are intended for operator seats used in earthmoving machines of conventional design.
NOTE Other tests can be appropriate for machines with design features that result in significantly different vibration characteristics.
1.6 Vibration which reaches the operator other than through the seat, for example that sensed by the operator’s feet on the platform or control pedals or by the operator´s hands on the steering-wheel, is not covered.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-1:2020(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
EN ISO 28927-1:2019

This Standard specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no-load conditions. The method has been established for surface grinding tasks only. Cutting and sanding generally create lower vibrations. It is intended that the results be used to compare different models of the same type of machine. This document is applicable to hand-held machines (see Clause 5), driven pneumatically or by other means, intended for grinding, cutting-off and rough sanding, with bonded, coated and super-abrasive products and with wire brushes for use on all kinds of materials. It is not applicable to die grinders or straight grinders.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-8:2010/A2:2019(Amendment)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO 28927-8:2009/Amd 2:2019)
EN ISO 28927-8:2009/A2:2019
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10819:2013/A1:2019(Amendment)
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)
EN ISO 10819:2013/A1:2019
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day