SIST EN 259-2:2002

Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance

This European Standard describes a method for the determination of the impact resistance of heavy duty wallcoverings..

Wandbekleidungen in Rollen - Hoch beanspruchbare Wandbekleidungen - Teil 2: Bestimmung der Stoßfestigkeit

Anwendungsbereich
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Stoßfestigkeit von hoch bean-
spruchbaren Wandbekleidungen.
EN 259-2:2001 (D)

Revetements muraux en rouleaux - Revetements muraux a usage intense - Partie 2: Détermination de la résistance a l'impact

La présente Norme européenne décrit une méthode de détermination de la résistance a l'impact des revetements muraux a usage intense.

Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance

General Information

• Status: Published
• Publication Date: 31-Dec-2001
• ICS: 91.180 - Interior finishing
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2002
• Due Date: 01-Jan-2002
• Completion Date: 01-Jan-2002
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 259-2:2001 - Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance

Relations

• Replaces: SIST EN 259:2000/A1:2000 - Wall coverings in roll form - Specification for heavy duty wall coverings
• Effective Date: 01-Jan-2002
• Replaces: SIST EN 259:2000 - Wall coverings in roll form - Specification for heavy duty wall coverings
• Effective Date: 01-Jan-2002
• Replaces: SIST EN 259:2000/AC:2001 - Wall coverings in roll form - Specification for heavy duty wall coverings
• Effective Date: 01-Jan-2002

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 259-2:2002
01-januar-2002
1DGRPHãþD
SIST EN 259:2000
SIST EN 259:2000/A1:2000
SIST EN 259:2000/AC:2001
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of
impact resistance
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact
resistance
Wandbekleidungen in Rollen - Hoch beanspruchbare Wandbekleidungen - Teil 2:
Bestimmung der Stoßfestigkeit
Revetements muraux en rouleaux - Revetements muraux a usage intense - Partie 2:
Détermination de la résistance a l'impact
Ta slovenski standard je istoveten z: EN 259-2:2001
ICS:
91.180 1RWUDQMD]DNOMXþQDGHOD Interior finishing
SIST EN 259-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 259-2:2002

---------------------- Page: 2 ----------------------

SIST EN 259-2:2002
EUROPEAN STANDARD
EN 259-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2001
ICS 91.180 Supersedes EN 259:1991
English version
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2:
Determination of impact resistance
Revêtements muraux en rouleaux - Revêtements muraux à Wandbekleidungen in Rollen - Hoch beanspruchbare
usage intense - Partie 2: Détermination de la résistance à Wandbekleidungen - Teil 2: Bestimmung der Stoßfestigkeit
l'impact
This European Standard was approved by CEN on 20 January 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 259-2:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 259-2:2002
Page 2
EN 259-2:2001
Contents
Page
Foreword 3
Introduction 4
1 Scope 4
2 Normative references 4
3 Terms and definitions 4
4 Principle 4
5 Materials 5
6Apparatus 5
7 Preparation and conditioning of test pieces 7
8 Procedure 7
9 Evaluation and expression of results 8
10 Test report 8

---------------------- Page: 4 ----------------------

SIST EN 259-2:2002
Page 3
EN 259-2:2001
Foreword
This European Standard has been prepared by Technical Committee 99 “Wallcoverings in roll
form”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by October 2001, and conflicting national
standards shall be withdrawn at the latest by October 2001.
This European Standard supersedes EN 259:1991 and Amendment EN 259:1991/A1:1996. It
comprises two Parts. Part 1 covers the specifications for heavy duty wallcoverings. Part 2
specifies the method of test for the determination of impact resistance which is particular to
heavy duty wallcoverings.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.

---------------------- Page: 5 ----------------------

SIST EN 259-2:2002
Page 4
EN 259-2:2001
Introduction
A heavy duty wallcovering is a wallcovering intended for use in areas of heavy traffic or in
commercial premises.
There are many types of wallcovering and many processes used in their manufacture. To
ensure satisfactory performance, it is important that decorators follow the manufacturer’s
recommended hanging instructions for each particular product.
1 Scope
This European Standard describes a method for the determination of the impact resistance of
heavy duty wallcoverings.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and
the publications are listed hereafter. For dated references subsequent amendments to, or
revisions of any of these publication apply to this European Standard only when incorporated
in it by amendment or revision. For undated references the latest edition of the publication
referred to applies (including amendments).
EN 12956 Wallcoverings in roll form - Determination of dimensions, straightness,
spongeability and washability
prEN 235:1998 Wallcoverings in roll form - Vocabulary and symbols
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in
prEN 235:1998 apply.
4 Principle
A test piece
...