Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test

This standard specifies the dimensions, the method of sampling and the preparation of the test specimens, also the conditions for performing the low temperature tensile test perpendicular to the weld in order to determine the low temperature tensile welding factor.  A low temperature tensile test may be used in conjunction with other tests (e.g. bend, tensile creep, macro, ...) to assess the performance of welded assemblies, made from thermoplastics materials.  The low temperature tensile welding factor and the appearance of the fracture surface provide a guide regarding the ductility of the joint and the quality of the work.

Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 6: Zugversuch bei tiefen Temperaturen

Diese Norm legt Maße, Probennahmeverfahren und Vorbereitung der Proben sowie die Durchführungsbestimmungen für den Zugversuch bei tiefen Temperaturen rechtwinklig zur Schweißnaht fest, um den Zug-Schweißfaktor bei tiefen Temperaturen zu bestimmen. Ein Zugversuch bei tiefen Temperaturen darf in Verbindung mit anderen Prüfungen (z.B. Biegeversuch, Zeitstand-Zugversuch, makroskopische Prüfung usw.) angewendet werden, um das Betriebsverhalten von Schweißverbindungen aus thermoplastischen Kunststoffen zu beurteilen.

Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 6: Essai de traction a basse température

La présente norme spécifie les dimensions, la méthode de prélevement et de préparation des éprouvettes, ainsi que les conditions d'exécution de l'essai de traction a basse température effectué perpendiculairement a la soudure, afin de déterminer le facteur de soudage en traction a basse température. Un essai de traction a basse température peut etre effectué en combinaison avec d'autres   examens ou essais (par exemple essai de pliage, essai de fluage en traction, examen macrographique, etc.) afin d'évaluer les performances des assemblages soudés en thermoplastiques.

Preskus zvarjenih spojev plastomernih polizdelkov - 3. del: Trgalni preskus pri nizki temperaturi

General Information

Status
Published
Publication Date
30-Nov-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000

Relations

Buy Standard

Standard
EN 12814-6:2000
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskus zvarjenih spojev plastomernih polizdelkov - 3. del: Trgalni preskus pri nizki temperaturiPrüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 6: Zugversuch bei tiefen TemperaturenEssais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 6: Essai de traction a basse températureTesting of welded joints of thermoplastics semi-finished product
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.