Geographic information -- Procedures for item registration -- Part 1: Fundamentals

ISO 19135-1:2015 specifies procedures to be followed in establishing, maintaining, and publishing registers of unique, unambiguous, and permanent identifiers and meanings that are assigned to items of geographic information. In order to accomplish this purpose, ISO 19135-1:2015 specifies elements that are necessary to manage the registration of these items.

Information géographique -- Procédures pour l'enregistrement d'éléments -- Partie 1: Principes de base

L'ISO 19135-1:2015 spécifie les procédures à suivre pour établir, mettre à jour et publier les registres d'identifiants uniques, non ambigus et permanents, ainsi que les significations qui sont attribuées aux éléments de l'information géographique. Afin d'atteindre cet objectif, l'ISO 19135-1:2015 spécifie les éléments qui sont nécessaires à leur enregistrement.

Geografske informacije - Postopki za registracijo prostorskih postavk - 1. del: Osnove

General Information

Status
Not Published
Public Enquiry End Date
29-Apr-2017
Publication Date
05-Apr-2017
Technical Committee
Current Stage

Relations

Buy Standard

Standard
ISO 19135-1:2015 - Geographic information -- Procedures for item registration
English language
62 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 19135-1:2015 - Information géographique -- Procédures pour l'enregistrement d'éléments
French language
66 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
k ISO 19135-1:2017
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 19135-1
First edition
2015-10-01
Geographic information — Procedures
for item registration —
Part 1:
Fundamentals
Information géographique — Procédures pour l’enregistrement
d’éléments —
Partie 1: Principes de base
Reference number
©
ISO 2015
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Conformance . 1
2.1 General . 1
2.2 Core conformance class . 1
2.3 Extended conformance class . . 1
2.4 Hierarchical register conformance class . 2
3 Normative references . 2
4 Terms, definitions, and abbreviations . 2
4.1 Terms and definitions . 2
4.2 Abbreviations . 4
4.3 Notation . 4
5 Roles and responsibilities in the management of registers . 4
5.1 General . 4
5.2 Register owner . 5
5.3 Register manager . 6
5.3.1 Appointment of a register manager . 6
5.3.2 Responsibilities of a register manager . 6
5.4 Submitting organizations . 6
5.5 Control body . 7
5.6 Registry manager . 7
5.7 Register user . 7
6 Management of registers . 7
6.1 Establishment of registers . 7
6.2 Status of register items . 8
6.3 Change of status of register items . 8
6.3.1 General. 8
6.3.2 Addition . 8
6.3.3 Clarification . 8
6.3.4 Invalidation . 8
6.3.5 Retirement. 9
6.3.6 Supersession. 9
6.4 Submission of proposals . 9
6.4.1 Process of submitting . 9
6.4.2 Submitting organizations . 9
6.4.3 Register manager . 9
6.5 Approval process .10
6.6 State of a register .10
6.7 Publication .10
6.8 Integrity .11
6.9 Registration proposals .11
7 Register schema .11
7.1 General .11
7.2 Register .12
7.2.1 Register schema .12
7.2.2 Object Type: Register .13
7.3 RegisterStakeholder .14
7.3.1 RegisterStakeholder schema .14
7.3.2 Object Type: RegisterStakeholder.15
7.4 ItemClass .16
7.4.1 ItemClass schema .16
7.4.2 Object Type: ItemClass .17
7.5 RegisterItem .17
7.5.1 RegisterItem schema .17
7.5.2 Object Type: RegisterItem .18
8 Hierarchical registers .20
8.1 General .20
8.2 Management of hierarchical registers .21
8.3 Extensions to the register schema .21
8.4 SubregisterDescription .21
8.4.1 SubregisterDescription schema .21
8.4.2 Object Type: SubregisterDescription .22
Annex A (normative) Abstract test suite .24
Annex B (normative) UML model for the extended conformance class .26
Annex C (informative) Establishment of registers by ISO/TC 211 .50
Annex D (informative) Processing of proposals .53
Annex E (informative) Information to be included in proposals for item registration .58
Annex F (informative) Backward compatibility .60
Bibliography .62
iv © ISO 2015 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each membe
...


NORME ISO
INTERNATIONALE 19135-1
Première édition
2015-10-01
Information géographique —
Procédures pour l’enregistrement
d’éléments —
Partie 1:
Principes de base
Geographic information — Procedures for item registration —
Part 1: Fundamentals
Numéro de référence
©
ISO 2015
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – Tous droits réservés

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d’application . 1
2 Conformité . 1
2.1 Généralités . 1
2.2 Classe de conformité de base. 1
2.3 Classe de conformité étendue . 1
2.4 Classe de conformité registre hiérarchique . 2
3 Références normatives . 2
4 Termes, définitions et abréviations . 2
4.1 Termes et définitions . 2
4.2 Abréviations . 4
4.3 Notation . 4
5 Rôles et responsabilités dans la gestion des registres . 5
5.1 Généralités . 5
5.2 Propriétaire de registre . 6
5.3 Gestionnaire de registre . 6
5.3.1 Désignation d’un gestionnaire de registre . 6
5.3.2 Responsabilités d’un gestionnaire de registre . 7
5.4 Organisations soumissionnaires . 7
5.5 Organisme de contrôle . 7
5.6 Gestionnaire de système de registre . 7
5.7 Utilisateur de registre . 7
6 Gestion de registres . 8
6.1 Création de registres . 8
6.2 État des éléments de registre . 8
6.3 Modification des états des éléments d’un registre. 9
6.3.1 Généralités . 9
6.3.2 Ajout . 9
6.3.3 Clarification . 9
6.3.4 Invalidation . 9
6.3.5 Retrait . 9
6.3.6 Remplacement . 9
6.4 Soumission des propositions . 9
6.4.1 Procédure de soumission . 9
6.4.2 Organisations soumissionnaires .10
6.4.3 Gestionnaire de registre .10
6.5 Procédure d’approbation .11
6.6 État d’un registre .11
6.7 Publication .11
6.8 Intégrité .12
6.9 Propositions d’enregistrement .12
7 Schéma de registre .12
7.1 Généralités .12
7.2 Register .13
7.2.1 Schéma Register .13
7.2.2 Type d’objet : Register.14
7.3 RegisterStakeholder .16
7.3.1 Schéma RegisterStakeholder .16
7.3.2 Type d’objet : RegisterStakeholder .16
7.4 ItemClass .17
7.4.1 Schéma ItemClass .17
7.4.2 Type d’objet : ItemClass .18
7.5 RegisterItem .19
7.5.1 Schéma RegisterItem .19
7.5.2 Type d’objet : RegisterItem .20
8 Registres hiérarchiques .22
8.1 Généralités .22
8.2 Gestion de registres hiérarchiques .22
8.3 Extensions au schéma du registre .23
8.4 SubregisterDescription .23
8.4.1 Schéma SubregisterDescription .23
8.4.2 Type d’objet : SubregisterDescription .23
Annexe A (normative) Suite de tests abstraits .25
Annexe B (normative) Modèle UML pour la classe de conformité étendue .27
Annexe C (informative) Création de registres par l’ISO/TC 211 .52
Annexe D (informative) Traitement des propositions .55
Annexe E (informative) Informations à inclure dans les propositions
d’enregistrement d’éléments .61
Annexe F (informative) Rétrocompatibilité .63
Bibliographie .66
iv © ISO 2015 – Tous droits réservés

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
...


SLOVENSKI STANDARD
kSIST ISO 19135-1:2017
01-april-2017
Geografske informacije - Postopki za registracijo prostorskih postavk - 1. del:
Osnove
Geographic information -- Procedures for item registration -- Part 1: Fundamentals
Information géographique -- Procédures pour l'enregistrement d'éléments -- Partie 1:
Principes de base
Ta slovenski standard je istoveten z: ISO 19135-1:2015
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
kSIST ISO 19135-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

kSIST ISO 19135-1:2017
kSIST ISO 19135-1:2017
INTERNATIONAL ISO
STANDARD 19135-1
First edition
2015-10-01
Geographic information — Procedures
for item registration —
Part 1:
Fundamentals
Information géographique — Procédures pour l’enregistrement
d’éléments —
Partie 1: Principes de base
Reference number
©
ISO 2015
kSIST ISO 19135-1:2017
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

kSIST ISO 19135-1:2017
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Conformance . 1
2.1 General . 1
2.2 Core conformance class . 1
2.3 Extended conformance class . . 1
2.4 Hierarchical register conformance class . 2
3 Normative references . 2
4 Terms, definitions, and abbreviations . 2
4.1 Terms and definitions . 2
4.2 Abbreviations . 4
4.3 Notation . 4
5 Roles and responsibilities in the management of registers . 4
5.1 General . 4
5.2 Register owner . 5
5.3 Register manager . 6
5.3.1 Appointment of a register manager . 6
5.3.2 Responsibilities of a register manager . 6
5.4 Submitting organizations . 6
5.5 Control body . 7
5.6 Registry manager . 7
5.7 Register user . 7
6 Management of registers . 7
6.1 Establishment of registers . 7
6.2 Status of register items . 8
6.3 Change of status of register items . 8
6.3.1 General. 8
6.3.2 Addition . 8
6.3.3 Clarification . 8
6.3.4 Invalidation . 8
6.3.5 Retirement. 9
6.3.6 Supersession. 9
6.4 Submission of proposals . 9
6.4.1 Process of submitting . 9
6.4.2 Submitting organizations . 9
6.4.3 Register manager . 9
6.5 Approval process .10
6.6 State of a register .10
6.7 Publication .10
6.8 Integrity .11
6.9 Registration proposals .11
7 Register schema .11
7.1 General .11
7.2 Register .12
7.2.1 Register schema .12
7.2.2 Object Type: Register .13
7.3 RegisterStakeholder .14
7.3.1 RegisterStakeholder schema .14
7.3.2 Object Type: RegisterStakeholder.15
7.4 ItemClass .16
7.4.1 ItemClass schema .16
kSIST ISO 19135-1:2017
7.4.2 Object Type: ItemClass .17
7.5 RegisterItem .17
7.5.1 RegisterItem schema .17
7.5.2 Object Type: RegisterItem .18
8 Hierarchical registers .20
8.1 General .20
8.2 Management of hierarchical registers .21
8.3 Extensions to the register schema .21
8.4 SubregisterDescription .21
8.4.1 SubregisterDescription schema .21
8.4.2 Object Type: SubregisterDescription .22
Annex A (normative) Abstract test suite .24
Annex B (normative) UML model for the extended conformance class .26
Annex C (informative) Establishment of registers by ISO/TC 211 .50
Annex D (informative) Processing of proposals .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.