SIST EN 1991-1-1:2025/oprA1:2026
(Amendment)Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of construction works and imposed loads for buildings
Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of construction works and imposed loads for buildings
(1) EN 1991-1-1 gives rules on the following aspects related to actions, which are relevant to the structural design of buildings and civil engineering works including some geotechnical aspects:
- specific weight of construction materials and stored materials;
- self-weight of construction works;
- imposed loads for buildings.
(2) Mean values for specific weight of specific construction materials, additional materials for bridges, stored materials and products are given. In addition, for specific materials and products the angle of repose is provided.
(3) Methods for the assessment of the characteristic values of self-weight of construction works are given.
(4) Characteristic values of imposed loads are given for the following areas in buildings according to the category of use:
- residential, social, commercial and administration areas;
- areas for archive, storage and industrial activities;
- garage and vehicle traffic areas (excluding bridges);
- roofs;
- stairs and landings;
- terraces and balconies.
NOTE The loads on traffic areas given in this standard refer to vehicles up to a gross vehicle weight of 160 kN. Further information can be obtained from EN 1991-2.
(5) Characteristic values of horizontal imposed loads on parapets and partition walls acting as barriers are provided.
NOTE Forces due to vehicle impact are specified in EN 1991-1-7 and EN 1991-2.
1.2 Assumptions
(1) The general assumptions of EN 1990 apply.
(2) EN 1991-1-1 is intended to be used with EN 1990, the other parts of EN 1991 and the other Eurocode parts for the design of structures.
Eurocode 1 - Einwirkungen auf Tragwerke - Teil 1-1: Wichte von Baustoffen und Lagergütern, Eigengewicht von Bauwerken und Nutzlasten im Hochbau
Eurocode 1 - Actions sur les structures - Partie 1-1 : Poids volumiques des matériaux, poids propre des ouvrages de construction et charges d’exploitation applicables aux bâtiments
Evrokod 1 - Vplivi na konstrukcije - 1-1. del: Specifična teža materialov, lastna teža konstrukcijskih del in koristne obtežbe stavb
(1) EN 1991-1-1 podaja pravila o naslednjih vidikih, povezanih z obtežbami, ki so pomembni za projektiranje konstrukcij stavb in gradbenih inženirskih del, vključno z nekaterimi geotehničnimi vidiki:
- specifična teža gradbenih materialov in skladiščenih materialov;
- lastna teža gradbenih del;
- koristne obtežbe za stavbe.
(2) Podane so srednje vrednosti specifične teže določenih gradbenih materialov, dodatnih materialov za mostove, skladiščenih materialov in izdelkov. Poleg tega je za določene materiale in izdelke podan kot nasutja (angle of repose).
(3) Podane so metode za oceno karakterističnih vrednosti lastne teže gradbenih del.
(4) Karakteristične vrednosti koristnih obtežb so podane za naslednja območja v stavbah glede na kategorijo uporabe:
- stanovanjska, socialna, komercialna in upravna območja;
- območja za arhivske, skladiščne in industrijske dejavnosti;
- garažna območja in območja za promet vozil (brez mostov);
- strehe;
- stopnice in podesti;
- terase in balkoni.
OPOMBA Obtežbe na prometnih območjih, navedene v tem standardu, se nanašajo na vozila do skupne teže 160 kN. Dodatne informacije so na voljo v EN 1991-2.
(5) Podane so karakteristične vrednosti horizontalnih koristnih obtežb na ograjah in predelnih stenah, ki delujejo kot pregrade.
OPOMBA Sile zaradi trčenja vozil so določene v EN 1991-1-7 in EN 1991-2.
1.2 Predpostavke
(1) Splošne predpostavke iz EN 1990 veljajo.
(2) EN 1991-1-1 je namenjen uporabi z EN 1990, drugimi deli EN 1991 in drugimi deli Evrokodov za projektiranje konstrukcij.
General Information
- Status
- Not Published
- Public Enquiry End Date
- 25-Jun-2026
- Technical Committee
- KON - Structures
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 06-May-2026
- Due Date
- 23-Sep-2026
Relations
- Effective Date
- 05-Nov-2025
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.

Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 1991-1-1:2025/oprA1:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of construction works and imposed loads for buildings". This standard covers: (1) EN 1991-1-1 gives rules on the following aspects related to actions, which are relevant to the structural design of buildings and civil engineering works including some geotechnical aspects: - specific weight of construction materials and stored materials; - self-weight of construction works; - imposed loads for buildings. (2) Mean values for specific weight of specific construction materials, additional materials for bridges, stored materials and products are given. In addition, for specific materials and products the angle of repose is provided. (3) Methods for the assessment of the characteristic values of self-weight of construction works are given. (4) Characteristic values of imposed loads are given for the following areas in buildings according to the category of use: - residential, social, commercial and administration areas; - areas for archive, storage and industrial activities; - garage and vehicle traffic areas (excluding bridges); - roofs; - stairs and landings; - terraces and balconies. NOTE The loads on traffic areas given in this standard refer to vehicles up to a gross vehicle weight of 160 kN. Further information can be obtained from EN 1991-2. (5) Characteristic values of horizontal imposed loads on parapets and partition walls acting as barriers are provided. NOTE Forces due to vehicle impact are specified in EN 1991-1-7 and EN 1991-2. 1.2 Assumptions (1) The general assumptions of EN 1990 apply. (2) EN 1991-1-1 is intended to be used with EN 1990, the other parts of EN 1991 and the other Eurocode parts for the design of structures.
(1) EN 1991-1-1 gives rules on the following aspects related to actions, which are relevant to the structural design of buildings and civil engineering works including some geotechnical aspects: - specific weight of construction materials and stored materials; - self-weight of construction works; - imposed loads for buildings. (2) Mean values for specific weight of specific construction materials, additional materials for bridges, stored materials and products are given. In addition, for specific materials and products the angle of repose is provided. (3) Methods for the assessment of the characteristic values of self-weight of construction works are given. (4) Characteristic values of imposed loads are given for the following areas in buildings according to the category of use: - residential, social, commercial and administration areas; - areas for archive, storage and industrial activities; - garage and vehicle traffic areas (excluding bridges); - roofs; - stairs and landings; - terraces and balconies. NOTE The loads on traffic areas given in this standard refer to vehicles up to a gross vehicle weight of 160 kN. Further information can be obtained from EN 1991-2. (5) Characteristic values of horizontal imposed loads on parapets and partition walls acting as barriers are provided. NOTE Forces due to vehicle impact are specified in EN 1991-1-7 and EN 1991-2. 1.2 Assumptions (1) The general assumptions of EN 1990 apply. (2) EN 1991-1-1 is intended to be used with EN 1990, the other parts of EN 1991 and the other Eurocode parts for the design of structures.
SIST EN 1991-1-1:2025/oprA1:2026 is classified under the following ICS (International Classification for Standards) categories: 91.010.30 - Technical aspects; 91.040.01 - Buildings in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1991-1-1:2025/oprA1:2026 has the following relationships with other standards: It is inter standard links to kSIST FprEN 1991-1-1:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1991-1-1:2025/oprA1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2026
Evrokod 1 - Vplivi na konstrukcije - 1-1. del: Specifična teža materialov, lastna teža
konstrukcijskih del in koristne obtežbe stavb
Eurocode 1 - Actions on structures - Part 1-1: Specific weight of materials, self-weight of
construction works and imposed loads for buildings
Eurocode 1 - Einwirkungen auf Tragwerke - Teil 1-1: Wichte von Baustoffen und
Lagergütern, Eigengewicht von Bauwerken und Nutzlasten im Hochbau
Eurocode 1 - Actions sur les structures - Partie 1-1 : Poids volumiques des matériaux,
poids propre des ouvrages de construction et charges d’exploitation applicables aux
bâtiments
Ta slovenski standard je istoveten z: EN 1991-1-1:2025/prA1
ICS:
91.010.30 Tehnični vidiki Technical aspects
91.040.01 Stavbe na splošno Buildings in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 1991-1-1:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2026
ICS 91.010.30
English Version
Eurocode 1 - Actions on structures - Part 1-1: Specific
weight of materials, self-weight of construction works and
imposed loads for buildings
Eurocode 1 - Actions sur les structures - Partie 1-1 : Eurocode 1 - Einwirkungen auf Tragwerke - Teil 1-1:
Poids volumiques des matériaux, poids propre des Wichte von Baustoffen und Lagergütern, Eigengewicht
ouvrages de construction et charges d'exploitation von Bauwerken und Nutzlasten im Hochbau
applicables aux bâtiments
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 250.
This draft amendment A1, if approved, will modify the European Standard EN 1991-1-1:2025. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1991-1-1:2025/prA1:2026 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modifications throughout the whole document . 4
2 Modification to the Introduction . 4
3 Modification to Clause 1, “Scope” . 4
4 Modification to Clause 2, “Normative References” .
...



