oSIST prEN 16579:2013

Playing field equipment - Portable and fixed goals - Functional, safety requirements and test methods

This European Standard specifies the functional and safety requirements and test methods for all types of portable and permanent fixed playing field goals which includes - but not exclusively goals for sports such as football, rugby, hurling, gaelic football, handball, futsal and hockey. This European Standard is not applicable to goals according to EN 748 (football), EN 749 (handball), EN 750 (hockey), EN 1270 (basketball) and EN 15312 (free access multi-sports) and EN 13451-4 (water polo).
This standard is not applicable to
-  goals according to WI 00136312;
-  inflatable goals;
-  goals which are classified as toys under the responsibility of CEN/TC 52.
It is applicable to playing field goals used for competition, training or recreational play, indoor and outdoor areas including educational establishments and public recreational areas.
This standard does not apply for portable and permanent fixed playing field goals for American football.

Spielfeldgeräte - Ortsveränderliche und standortgebundene Tore - Funktionale, sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm legt funktionale und sicherheitstechnische Anforderungen und Prüfverfahren für sämtliche Arten ortsveränderlicher und standortgebundener Spielfeldtore fest; das umfasst (jedoch nicht ausschließlich) Tore für Sportarten wie Fußball, Rugby, Hurling, Gälischer Fußball, Handball, Hallenfußball und Hockey. Diese Europäische Norm ist nicht anwendbar auf Tore nach EN 748 (Fußball), EN 749 (Handball), EN 750 (Hockey), EN 1270 (Basketball), EN 15312 (frei zugängliche Multisportgeräte) und EN 13451-1 (Wasserpolo).
Diese Norm gilt nicht für:
   Tore nach WI 00136312;
   aufblasbare Tore;
   Tore, die unter der Zuständigkeit von CEN/TC 52 als Spielzeug eingestuft sind.
Diese Norm gilt für Spielfeldtore, die zu Wettkampf-, Trainings- oder Erholungszwecken genutzt und in Innen- und Außenbereichen einschließlich Bildungseinrichtungen und öffentlichen Erholungsbereichen verwendet werden.
Diese Norm gilt nicht für ortsveränderliche und standortgebundene Spielfeldtore beim American Football.

Équipements de jeux - Buts transportables et fixes - Exigences fonctionnelles et de sécurité, méthodes d’essai

La présente Norme européenne spécifie les exigences fonctionnelles et de sécurité et les méthodes d’essai de tous les types de buts transportables et fixes de terrains de jeux, notamment les buts destinés à des sports tels que le football, le rugby, le hurling, le football gaélique, le handball, le football en salle et le hockey. La présente Norme européenne ne s’applique pas aux buts conformes à l’EN 748 (football), à l’EN 749 (handball), à l’EN 750 (hockey), à l’EN 1270 (basketball), à l’EN 15312 (multisports en accès libre) et à l’EN 13451-4 (water-polo).
La présente norme n’est pas applicable :
   aux buts conformes au WI00136312 ;
   aux buts gonflables ;
   aux buts qui sont classifiés comme des jouets sous la responsabilité du CEN/TC 52.
Elle s’applique aux buts de terrains de jeux utilisés pour la compétition, l’entraînement ou les jeux récréatifs, à l’intérieur ou à l’extérieur, y compris dans les établissements scolaires et les espaces publics de loisirs.
La présente norme ne s’applique pas aux buts transportables et fixes de terrains de jeux pour le football américain.

Oprema športnih igrišč - Prenosna in nepremična nogometna vrata - Funkcionalne, varnostne zahteve in preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Jul-2013
• ICS: 97.220.30 - Indoor sports equipment
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 20-Apr-2016
• Due Date: 25-Apr-2016
• Completion Date: 20-Apr-2016
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Ref Project: prEN 16579 - Playing field equipment - Portable and fixed goals - Functional, safety requirements and test methods

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16579:2013
01-junij-2013
2SUHPDãSRUWQLKLJULãþ3UHQRVQDLQQHSUHPLþQDQRJRPHWQDYUDWD
)XQNFLRQDOQHYDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH
Playing field equipment - Portable and fixed goals - Functional, safety requirements and
test methods
Spielfeldgeräte - Ortsveränderliche und standortgebundene Tore - Funktionale,
sicherheitstechnische Anforderungen und Prüfverfahren
Équipements de jeux - Buts transportables et fixes - Exigences fonctionnelles et de
sécurité, méthodes d’essai
Ta slovenski standard je istoveten z: prEN 16579
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
oSIST prEN 16579:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16579:2013

---------------------- Page: 2 ----------------------
oSIST prEN 16579:2013


EUROPEAN STANDARD
DRAFT
prEN 16579
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2013
ICS 97.220.40
English Version
Playing field equipment - Portable and fixed goals - Functional,
safety requirements and test methods
Équipements de jeux - Buts transportables et fixes - Spielfeldgeräte - Ortsveränderliche und standortgebundene
Exigences fonctionnelles et de sécurité, méthodes d'essai Tore - Funktionale, sicherheitstechnische Anforderungen
und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16579:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Specifications .5
5 Requirements .7
6 Test methods . 11
7 Assembly, Installation and Maintenance instruction . 14
8 Marking . 15
Annex A (normative) Test methods for entrapment . 16
Annex B (informative) Foundation (general dimensions and capping) . 24
Annex C (informative) Examples of typical goals related to category . 26
Bibliography . 28

2

---------------------- Page: 4 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
Foreword
This document (prEN 16579:2013) has been prepared by Technical Committee CEN/TC 136 “Sports,
playground and other recreational facilities and equipment”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
3

---------------------- Page: 5 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
1 Scope
This European Standard specifies the functional and safety requirements and test methods for all types of
portable and permanent fixed playing field goals which includes - but not exclusively goals for sports such as
football, rugby, hurling, gaelic football, handball, futsal and hockey. This European Standard is not applicable
to goals according to EN 748 (football), EN 749 (handball), EN 750 (hockey), EN 1270 (basketball) and
EN 15312 (free access multi-sports) and EN 13451-4 (water polo).
This standard is not applicable to
 goals according to WI 00136312;
 inflatable goals;
 goals which are classified as toys under the responsibility of CEN/TC 52.
It is applicable to playing field goals used for competition, training or recreational play, indoor and outdoor
areas including educational establishments and public recreational areas.
This standard does not apply for portable and permanent fixed playing field goals for American football.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN ISO 1806, Fishing nets - Determination of mesh breaking force of netting (ISO 1806)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
goal
uprights, crossbar, together with any other parts such as the net, net support posts, boards, sockets and
anchoring systems
3.2
portable goal
goal structure which may or may not be temporarily located by light ground sockets but which, when erected
or assembled is stabilised by means of a specific ground anchorage system which enables the structure to
withstand the required design and test loads
Note 1 to entry: Portable goals can be referred to as free standing goals
3.3
fixed goal
goal structure which is set in a suitably -sized permanent foundation in such a way as to enable the combined
structure to withstand the required design and test loads
3.4
goal frame
crossbar and uprights which form the goal mouth crossbar and uprights
4

---------------------- Page: 6 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
3.5
net support
attachment which may be fixed to the goal frame for supporting the net, but which does not support the goal
frame
3.6
frame support
framework comprising the side bars and back bars that may support the goal frame
3.7
anchoring system
system for ensuring that a portable goal cannot tip over, slide or displace
3.8
in use
that period commencing with the erection of the goals on the field of play and their subsequent use for training
or play, in accordance with the rules of the game for that particular code of sport
3.9
intended use
purpose for which the goal has been designed
3.10
not in use
commencement of the dismantling of goals and the subsequent period when they are not available for their
intended use
4 Specifications
4.1 General
A goal should be purchased as a complete unit (e. g. goal, net, anchors, stabilisers, etc.) together with any
other accessories that may be required.
4.2 Categorisation
The categories are shown in Figures 1 and 2 and Tables 1 and 2.

a) Category A b) Category B
Figure 1 — Goal categories
5

---------------------- Page: 7 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
Table 1 — Goal sizes – Category A (internal height to crossbar)
Category Size ranges
Width Height to crossbar Overall height of uprights
w h h
1 2
(internal) (internal)



m m m
A1 —
0,70 ≤ w < 1,80 0,50 ≤ h < 1,20
1
A2 —
1,80 ≤ w < 4,88 1,20 ≤ h < 1,90
1
A3
—
< 1,99
1,80 ≤ w < 4,88 1,90 ≤ h
1
A4
—
3,00 ≤ w < 5,00 2,00 ≤ h < 2,44
1

Table 2 — Goal sizes Category B (height to crossbar / height to top of the crossbar)
Category Size ranges
Width Height to crossbar Overall height of uprights
w h (Gaelic) h
1 2
(internal) (to top of the crossbar (Rugby)



m m m
B1 4,50 ± 0,05
2,50 ≤ w < 3,00 1,50 ≤ h < 1,85
1
B2 4,50 ± 0,05
3,00 ≤ w < 4,60 1,85 ≤ h < 2,20
1
B3
8,50 ± 0,05
4,60 ≤ w < 6,50 2,20 ≤ h < 2,50
1
B4 4,60 ± 0,05
2,20 ≤ h < 2,50 6,00 ≤ h ≤10,00
1 2
B5 6,5 ± 0,05 2,5 ± 0,05 11,00 ± 0,05

B6
a
5,60 ≤ w < 6,50 2,50 ≤ h < 3,00 3,40 ≤ h ≤ 16,00
1 2
a
The laws of the game of Rugby Union do not specify any maximum value (see [1]). The maximum value is given as guidance.


a) Category A b) Category B
Figure 2 — Dimensions of goal frame
6

---------------------- Page: 8 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
4.3 Materials
Materials shall be selected and protected such that the structural integrity of the goal shall not be affected
before the next relevant maintenance inspection.
NOTE 1 The provisions relating to certain materials in this European Standard do not imply that other equivalent
materials are unsuitable in the manufacture of goals.
The selection of materials and their use should be in accordance with the appropriate European Standards
where applicable.
Particular care should be taken in the choice of materials where a goal is to be used in extreme climatic or
atmospheric conditions.
Where very low or very high temperatures can be anticipated care should be taken with material selection to
avoid possible hazards through direct skin contact.
!In the choice of a material or substance for a goal, consideration should be given to the eventual disposal of
the material or substance having regard to any possible environmental toxic hazard.
NOTE 2 Information on the identification and classification of such substances can be found in the Directive
67/548/EEC (classification, packaging and labelling of dangerous substances) [2] as well as in the Regulation (EC)
no.1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration,
Evaluation, Authorisation and Restriction of Chemicals (REACH) [3]."
5 Requirements
5.1 Strength
When tested in accordance with 6.2, goal frame shall not collapse nor show:
a) visible signs of cracks/fractures and/or
b) a measured deflection (or deformation) “d” (see Formula (1)) of the crossbar of > 10 mm.
5.2 Stability
When tested in accordance with 6.3, a goal frame shall not fall over nor slide.
5.3 Entrapment
5.3.1 General
Goals shall be designed and constructed so that there are shall be no crushing or shearing hazards between
moving parts and/or fixed parts and risk of entrapment when assessed in accordance with the procedure
given in Annex A.
5.3.2 Moving parts
Where opening sizes change during use due to movement, the permissible opening sizes stated in 5.3.3 shall
apply.
7

---------------------- Page: 9 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
5.3.3 Protection against entrapment
5.3.3.1 Entrapment of the head and neck
5.3.3.1.1 General
Equipment shall be constructed so that any openings do not create head and neck entrapment hazards either
by head first or feet first passage. Hazardous situations in which this type of entrapment can be encountered
include the following:
a) completely bound openings through which a user may slide feet first or head first,
b) partially bound or V-shaped openings and
c) other openings (e.g. shearing or moving openings).
5.3.3.1.2 Completely bound openings
Accessible completely bound openings with a lower edge more than 600 mm above ground shall be tested in
accordance with A.3.1.
Small probes n°1 and n°2 shall not pass through any opening unless it also allows the passage of large probe
n°3.
Non-rigid parts (e.g. ropes) shall not overlap if this creates apertures that are not in accordance with the
above.
5.3.3.1.3 Partially bound and V-shaped openings
Partially bound and V-shaped openings with an entrance at 600 mm or more above the ground shall be
constructed so that either:
a) the opening is not accessible when tested in accordance with A.3.2, or
b) if accessible at a position of 600 mm or more above ground when tested in accordance with A.3.2,
depending on the angular orientation range of the opening (see Figure A.6, a)), shall comply with the
following:
 Range 1: (template centre line ± 45° from vertical); the template apex contacts the base of the opening
and the depth of the opening is less than the length of the template to the underside of the shoulder
section.
 Range 2: (template centre line from horizontal to + 45°); when the template apex contacts the base of the
opening, the depth of the opening shall be less than the ‘A’ portion of the template. If the depth of the
opening is greater than the ‘A’ portion of the template all parts of the opening above the ‘A’ portion shall
also allow insertion of the shoulder section of the template or probe n°3.
 Range 3: no template test requirements.
8

---------------------- Page: 10 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
5.3.3.2 Entrapment of finger
Equipment should be constructed so that the following hazardous situations, which might cause entrapment
are not created:
a) gaps in which fingers can be trapped whilst the remainder of the body is moving or continues in forced
movement,
b) open-ended tubes or pipes, and
c) variable gaps (excluding chains).
Openings and holes which have a lower edge more than 1 000 mm above the playing surface, when tested in
accordance with A.2, shall conform to the following requirements:
d) the 8 mm finger rod (see Figure A.1) shall not pass through the minimum cross-section of the opening
and the profile of the opening shall be such that the rod cannot be locked in any position when set in
motion as given in A.2.2, or
e) if the 8 mm finger rod passes through the opening, the 25 mm finger rod (see Figure A.1) shall also pass
through the opening, provided that the opening does not permit access to another finger entrapment site.
The ends of tubes and pipes shall be closed off to prevent the risk of finger entrapment.
The closures shall not be removable without using tools.
Gaps whose dimensions change during use of the equipment shall have a minimum dimension in any position
of 18 mm.
5.4 Net fixings
The net shall be attached firmly to the frame of the goal with net fixings designed in such a way that a player
cannot be injured. When tested according to 6.4 no visible crack and/or permanent deformation shall occur at
the net fixings and the net fixing shall not dislodge.
Any opening in the net fixing outside the profile of the goal frame shall not result in entrapment when tested in
accordance with Annex A.
The fixings of the net shall be of non-corrodible material, neither spring hooks nor metal cup hooks shall be
used as a means of fixing the net to the goal frame.
The spacing between net fixings shall not allow a ball for which the goal is intended to be used to pass and
shall not create any head entrapment when tested in accordance with Annex A.
NOTE In practice, the method used to attach the net should also allow it to be removed reasonably easily and
quickly.
5.5 Net
Net yarn shall have a minimum diameter of 2 mm to reduce the risk of cutting
Net dimensions shall comply with the requirements of goal frame dimensions and the associated goal frame
net supports.
9

---------------------- Page: 11 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
Mesh sizes shall be
 ≤ 50 mm for Gaelic Football and Hurling;
 ≤ 120 mm for Football;
 ≤ 45 mm for Hockey.
The mesh size shall not allow a ball for which the goal is intended to be used to pass through nor create any
head and neck entrapment as assessed by the method specified in Annex A, but shall also comply with the
requirements in 5.3.
The net shall meet at least the requirement for mesh breaking strength of net quality class C (see Table 3).
Table 3 — Mesh breaking strength
N
Test method
Net quality class
min.
a
A 1 800 (1 500)
a
B 1 080 (900) EN ISO 1806
a
C
  792 (660)
a
This corresponds to the breaking strength of the net yarn, tested in accordance with EN ISO 2062.

5.6 Finish of equipment
The surface finish of equipment (e. g. glass fibre) shall be non-splintering.
Rough surfaces should not present any risk of injury.
There shall be no protruding nails, projecting wire, rope terminations or pointed or hard and sharp-edged parts
within any accessible part of the equipment. Corners, edges and projecting parts within any accessible part of
the equipment that project more than 8 mm, and which are not shielded by adjacent areas that are not more
than 25 mm from the end of the projecting part, shall be rounded off. The minimum radius of the curve shall be
3 mm.
Protruding bolt threads within any accessible part of the equipment shall be permanently covered, e.g. dome-
headed nuts. Nuts and bolt heads that project less than 8 mm shall be free from burrs. All welds shall be
ground smooth.
NOTE Figure 3 shows examples of protection for nuts and bolts.
10

---------------------- Page: 12 ----------------------
oSIST prEN 16579:2013
prEN 16579:2013 (E)
Dimensions in millimetres

Figure 3 — Examples of protection for nuts and bolts
The requirements shall be assessed by carrying out a visual inspection and measurement.
6 Test methods
6.1 Determination of strength
Condition the goal frame for a minimum of 1 h at a temperature of (20 ± 15) ºC. These shall be recorded.
Assemble and install the goal ready for use in accordance with the manufacturer's instructions.
6.2 Strength test procedure
It shall be taken into account that the loadings during the strength test may cause localised settlement of the
uprights. The following procedure shall apply to take this into account:
+10 s
a) Apply a vertical force at centre of the crossbar using strap of 50 mm nominal width for . Initially
1min
−0 s
this force shall be 80 % of v
...