SIST EN 61249-3-3:2001
(Main)Materials for printed boards and other interconnecting structures -- Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film
Materials for printed boards and other interconnecting structures -- Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film
Gives requirements for flexible polyester (PETP) films coated on one side or both with polyester, acrylic or epoxide type adhesive for use in the fabrication of flexible printed wring. Films coated on only one side are used as a coverlay or covercoat in the fabrication of flexible printed wiring. This coverlay or covercoat is also used to provide local support to areas subjected to mechanical or environmental stress. Films coated on both sides are used as bonding films in the fabrication of printed boards.
Materialien für Leiterplatten und andere Verbindungsstrukturen -- Teil 3-3: Rahmenspezifikation für unverstärkte, kaschierte und unkaschierte Basismaterialien (für flexible Leiterplatten) - Kleberbeschichtete flexible Polyesterfolien
Matériaux pour circuits imprimés et autres structures d'interconnexion -- Partie 3-3: Collection de spécifications intermédiaires pour les matériaux de base non renforcés, recouverts ou non (prévus pour les circuits imprimés flexibles) - Film flexible de polyester à revêtement adhésif
Donne les prescriptions pour les films flexibles de polyester recouverts d'un adhésif de type polyester, acrylique ou époxyde destinés à la fabrication des câblages imprimés souples.
Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61249-3-3:2001
01-marec-2001
Materials for printed boards and other interconnecting structures - Part 3-3:
Sectional specification set for unreinforced base materials, clad and unclad
(intended for flexible printed boards) - Adhesive coated flexible polyester film
Materials for printed boards and other interconnecting structures -- Part 3-3: Sectional
specification set for unreinforced base materials, clad and unclad (intended for flexible
printed boards) - Adhesive coated flexible polyester film
Materialien für Leiterplatten und andere Verbindungsstrukturen -- Teil 3-3:
Rahmenspezifikation für unverstärkte, kaschierte und unkaschierte Basismaterialien (für
flexible Leiterplatten) - Kleberbeschichtete flexible Polyesterfolien
Matériaux pour circuits imprimés et autres structures d'interconnexion -- Partie 3-3:
Collection de spécifications intermédiaires pour les matériaux de base non renforcés,
recouverts ou non (prévus pour les circuits imprimés flexibles) - Film flexible de polyester
à revêtement adhésif
Ta slovenski standard je istoveten z: EN 61249-3-3:1999
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61249-3-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61249-3-3:2001
---------------------- Page: 2 -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.