iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CLC IEC/TR 63161:2024

(Main)

Assignment of safety integrity requirements - Basic rationale (IEC/TR 63161:2022)

Assignment of safety integrity requirements - Basic rationale (IEC/TR 63161:2022)

This Technical Report is applicable, where a risk assessment according to ISO 12100 has been conducted for a machine or process plant and where a safety related control function has been selected for implementation as a protective measure against specified hazards.
For the given case, this Technical Report describes the basic logical rationale, which is followed to assign a safety integrity requirement to the selected function.
This Technical Report is applicable to safety related control functions in all modes of application:
continuous mode, high demand mode and low demand mode of application

Zuordnung der Sicherheitsintegritäts-Anforderungen - Grundlegende Begründungen (IEC/TR 63161:2022)

Attribution des exigences en matière d'intégrité de la sécurité - Justification fondamentale (IEC/TR 63161:2022)

Dodelitev zahtev celovite varnosti - Osnovni princip (IEC/TR 63161:2022)

To tehnično poročilo se uporablja, kadar je bila za stroj ali procesni obrat izvedena ocena tveganja v skladu s standardom ISO 12100 in kot zaščitni ukrep za preprečevanje določenih nevarnosti izbrana nadzorna funkcija, povezana z varnostjo.
Za dani primer je v tem tehničnem poročilu opisan osnovni logični princip, na podlagi katerega se izbrani funkciji dodeli zahteva celovite varnosti.
To tehnično poročilo se uporablja za nadzorne funkcije, povezane z varnostjo, v vseh načinih uporabe:
neprekinjenem načinu ter načinu z visokimi in nizkimi zahtevami.

General Information

Status
Published
Publication Date
13-Aug-2024
ICS
13.110 - Safety of machinery
Technical Committee
MOV - Measuring equipment for electromagnetic quantities
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Feb-2024
Due Date
12-Apr-2024
Completion Date
14-Aug-2024
Ref Project
CLC IEC/TR 63161:2024 - Assignment of safety integrity requirements - Basic rationale

Buy Standard

TP CLC IEC/TR 63161:2024 - BARVETP CLC IEC/TR 63161:2024 - BARVE
PreviousNext
Technical report
TP CLC IEC/TR 63161:2024 - BARVE
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2024
Dodelitev zahtev celovite varnosti - Osnovni princip (IEC/TR 63161:2022)
Assignment of safety integrity requirements - Basic rationale (IEC/TR 63161:2022)
Zuordnung der Sicherheitsintegritäts-Anforderungen - Grundlegende Begründungen
(IEC/TR 63161:2022)
Attribution des exigences en matière d'intégrité de la sécurité - Justification
fondamentale (IEC/TR 63161:2022)
Ta slovenski standard je istoveten z: CLC IEC/TR 63161:2024
ICS:
13.110 Varnost strojev Safety of machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT CLC IEC/TR 63161

RAPPORT TECHNIQUE
TECHNISCHER REPORT February 2024
ICS 13.110
English Version
Assignment of safety integrity requirements - Basic rationale
(IEC/TR 63161:2022)
Attribution des exigences en matière d'intégrité de la Zuordnung der Sicherheitsintegritäts-Anforderungen -
sécurité - Justification fondamentale Grundlegende Begründungen
(IEC/TR 63161:2022) (IEC/TR 63161:2022)

This Technical Report was approved by CENELEC on 2024-01-22.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC IEC/TR 63161:2024 E

European foreword
This document (CLC IEC/TR 63161:2024) consists of the text of IEC/TR 63161:2022 prepared by
IEC/TC 44 "Safety of machinery - Electrotechnical aspects".
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Technical Report IEC/TR 63161:2022 was approved by CENELEC as a
European Technical Report without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61508-1 NOTE Approved as EN 61508-1
IEC 61508-4:2010 NOTE Approved as EN 61508-4:2010 (not modified)
IEC 61508-5:2010 NOTE Approved as EN 61508-5:2010 (not modified)
IEC 61511-1:2016 NOTE Approved as EN 61511-1:2017 (not modified)
IEC 62061:2021 NOTE Approved as EN IEC 62061:2021 (not modified)
ISO 13849 (series) NOTE Approved as EN ISO 13849 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
ISO 12100 2010 Safety of machinery – General principles for EN ISO 12100 2010
design – Risk assessment and risk reduction

IEC TR 63161 ®
Edition 1.0 2022-07
TECHNICAL
REPORT
colour
inside
Assignment of safety integrity requirements – Basic rationale

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.110 ISBN 978-2-8322-3944-5

– 2 – IEC TR 63161:2022 © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Risk based quantitative approach . 10
4.1 General . 10
4.2 Sequence of steps in functional safety assignment . 10
4.3 Reference information . 12
4.3.1 General . 12
4.3.2 Accident scenario . 13
4.3.3 Hazard zone . 13
4.3.4 Severity of harm . 13
4.3.5 Safety control function . 14
5 Quantified parameters of a functional safety assignment . 14
5.1 General . 14
5.2 Parameter types . 14
5.2.1 General . 14
5.2.2 Probability . 14
5.2.3 Event rate . 14
5.3 Probability of occurrence of harm . 15
5.4 Quantification of risk . 15
5.5 Target failure measure . 15
5.6 Probability of occurrence of a hazardous event – P . 16
r
5.7 Exposure parameter – F . 17
r
5.8 Probability of avoiding or limiting harm – A . 18
v
5.8.1 General . 18
5.8.2 Vulnerability (V) . 18
5.8.3 Avoidability (A) . 19
5.9 Demand types and related event rates . 19
5.9.1 Event classes . 19
5.9.2 Demand and demand rate . 20
5.9.3 Initiating events and rate of initiating events I . 20
R
5.9.4 Safety demands and safety demand rate D . 21
R
5.9.5 Tolerable risk limit – Parameter L . 22
(S)
5.10 Additional parameters . 23
6 General principle of functional safety assignment . 25
6.1 Basics . 25
6.1.1 Applicability to complete functions . 25
6.1.2 Risk relation . 25
6.1.3 Logical independence of parameters . 25
6.2 High demand or continuous mode of operation . 25
6.3 Low demand mode of operation . 26
7 Assignment of the demand mode . 27
7.1 Demand mode – General . 27

IEC TR 63161:2022 © IEC 2022 – 3 –
7.2 Assignment criteria . 30
8 Relation to ISO 12100 . 30
9 Tools for functional safety assignment . 31
9.1 General . 31
9.2 Selection of independent parameters . 32
9.3 Logarithmizing parameters . 32
9.4 Discretization of parameters . 32
9.5 Parameter scores . 33
9.6 Scoring methods in strict sense . 34
Annex A (informative) Examples of SIL assignment tools numerical analysis . 35
A.1 General . 35
A.2 Assignment of score values to parameter entries . 35
A.3 Extraction of tolerable risk limits . 36
A.4 Risk matrix of IEC 62061 . 38
A.5 Risk graph of ISO 13849 . 41
A.6 Risk graphs for low demand mode of operation . 43
Bibliography . 46

Figure 1 – Sequence of steps in functional safety assignment. 12
Figure 2 – Protection layers, event rates and their relation. 22
Figure 3 – Hazard rate according to the Henley / Kumamoto equation . 29
Figure 4 – Elements of risk according to ISO 12100 . 31
Figure 5 – Discretization of parameters . 33
Figure A.1 – Extraction of tolerable risk limits . 37
Figure A.2 – Risk matrix based on IEC 62061 . 38
Figure A.3 – Maximum allowable PFH as function of the score sum for the different
severity levels . 39
Figure A.4 – Representation by a continuous numerical interpolation . 40
Figure A.5 – Risk graph of ISO 13849-1 . 41
Figure A.6 – Interpolation per severity level . 43
Figure A.7 – Risk graph for low demand mode of operation . 44
Figure A.8 – Risk graph for low demand mode of operation – from Figure 7 of VDMA
4315-1 . 45

Table 1 – Parameters overview . 24
Table A.1 – Relation between PLs and ranges in PFH . 42

– 4 – IEC TR 63161:2022 © IEC 2022
INTERNA
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62061:2021/A1:2024(Amendment)
Amendment 1 - Safety of machinery - Functional safety of safety-related control systems (IEC 62061:2021/AMD1:2024)
EN IEC 62061:2021/A1:2024
  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 63394:2024(Main)
Safety of machinery - Guidelines on functional safety of safety-related control system
CLC IEC/TS 63394:2024

In the context of the safety of machinery, the sector standard IEC 62061 as well as ISO 13849 1 provide requirements to manufacturers of machines for the design, development and integration of safety-related control systems (SCS) or safety-related parts of control systems (SRP/CS), depending on technology used (mechanical, pneumatic, hydraulic or electrical technologies) to perform safety function(s). This document does not replace ISO 13849-1 and IEC 62061. This document gives additional guidance to the application of IEC 62061 or ISO 13849-1. This document:
   gives guidelines and specifies additional requirements for specific safety functions based on the methodology of ISO 12100, which are relevant in machinery and respecting typical boundary conditions of machinery;
   considers safety functions which are designed for high demand mode of operation yet are rarely operated, called rarely activated safety functions;
NOTE 1 IEC 62061:2021 completely covers high demand. However, other safety functions related to the protection of the machine itself and indirectly of persons are considered more in detail in this document.
   gives additional information for the calculation of failure rates using other (non-electronic) technologies based e.g. on Weibull distribution, because all the formula defined in IEC 62061 and ISO 13849-1 are based on exponential distribution.
Therefore, the basis for these guidelines and additional requirements is
   a typical classification of safety functions;
   a consideration of typical architectures used for designing safety functions;
   a consideration of modes of operation of safety functions;
   the derivation and evaluation of PFH formulas for subsystems considering the used technology.
NOTE 2 These guidelines can also be used for application of ISO 13849-1 for the design process of SRP/CS.
This document does not address low demand mode of operation according to IEC 61508.
This document does not take into account either layer of protection analysis (LOPA) or basic process control system (BPCS), according to IEC 61511 as a risk reduction measure.
This document considers all lifecycle phases of the machine regarding functional safety, and SCS or SRP/CS.
NOTE 3 The user of the machine needs information from the machine manufacturer for the safe operation of the machine, e.g. useful lifetime of components, maintenance information, testing of safety functions if necessary.

  • Technical specification
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 63074:2024(Main)
Safety of machinery - Security aspects related to functional safety of safety-related control systems
CLC IEC/TS 63074:2024

This technical specification identifies the relevant aspects of the IEC 62443 series related to security threats and vulnerabilities that are considered for the design and implementation of safety-related control systems (SCS) which can lead to the loss of the ability to maintain safe operation of a machine.
Typical security aspects related to the machine with potential relation to SCS are:
– vulnerabilities of the SCS either directly or indirectly through the other parts of the machine which can be exploited by security threats that can result in security attacks (security breach);
– influence on the safety characteristics and ability of the SCS to properly perform its function(s);
– typical use case definition and application of a corresponding threat model.
Non-safety-related aspects of security threats and vulnerabilities are not considered in this document.
The focus of this document is on intentional malicious actions. However, intentional hardware manipulation (e.g. wiring, exchange of components) or foreseeable misuse by physical manipulation of SCS (e.g. physical bypass) is not considered in this document.
This document does not cover security requirements for information technology (IT) products and for the design of devices used in the SCS (e.g., product specific standards can be available, such as IEC TS 63208).

  • Technical specification
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61800-5-3:2024(Main)
Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders (IEC 61800-5-3:2021)
EN IEC 61800-5-3:2023

This part of IEC 61800, which is a product standard, specifies requirements and makes
recommendations for the design and development, integration and validation of safety-related
encoder (Encoder(SR)) in terms of their functional safety considerations, electrical safety and
environmental conditions. It applies to Encoder(SR), being sensors as part of a PDS(SR).
NOTE 1 The term "integration" refers to the Encoder(SR) itself, not to its incorporation into the safety-related
application.
This document can also be referred to and used for Encoder(SR) in any other safety-related
application, for example safety-related position monitoring.
NOTE 2 This document specifies only complementary functional safety, electrical safety and environmental condition
requirements that are not clearly provided by other parts of the IEC 61800 series.
This document is applicable where functional safety of an encoder is claimed and the
Encoder(SR) is operating mainly in the high demand or continuous mode.
NOTE 3 While low demand mode operation is possible for an Encoder(SR), this document concentrates on high
demand and continuous mode. Safety sub-functions implemented for high demand or continuous mode can also be
used in low demand mode. Requirements for low demand mode are given in IEC 61508 (all parts) [2]. Some guidance
for the estimation of average probability of dangerous failure on demand (PFDavg) value is provided in
IEC 61800-5-2:2016, Annex F.
The requirements of IEC 61800-5-2:2016 for PDS(SR) apply to Encoder(SR) as applicable. This
document includes additional or different requirements for Encoder(SR). It sets out safetyrelated
considerations of Encoder(SR) in terms of the framework of IEC 61508 (all parts), and
introduces requirements for Encoder(SR) as subsystems of a safety-related system. It is
intended to facilitate the realisation of the electrical/electronic/programmable electronic
(E/E/PE) and mechanical parts of an Encoder(SR) in relation to the safety performance of safety
sub-function(s) of an Encoder(SR).
Manufacturers and suppliers of Encoder(SR) will, by using the normative requirements of this
document, indicate to users (system integrator, original equipment manufacturer) the safety
performance of the Encoder(SR). This will facilitate the incorporation of Encoder(SR) into
safety-related control systems using the principles of IEC 61508 (all parts), and possibly its
specific sector implementations (for example IEC 61511 (all parts) [3], IEC 61513 [4],
IEC 62061 [5] or ISO 13849-1 and ISO 13849-2 (see Clause 2).
By applying the requirements from this document, the corresponding requirements of
IEC 61508 (all parts) that are necessary for an Encoder(SR) are fulfilled.
This document does not specify requirements for:
• the functional properties of an Encoder(SR) without any safety relevance;
• the hazard and risk analysis of a particular application;
• the identification of safety sub-functions for that application;
• the initial allocation of SILs to those safety sub-functions;
• the driven equipment except for interface arrangements;
• secondary hazards (for example from failure in a production or manufacturing process);
• the Encoder(SR) manufacturing process;
• the validity of signals and commands to the Encoder(SR); and
• security aspects (e.g. cyber security or Encoder(SR) security of access).
NOTE 4 The functional safety requirements of an Encoder(SR) are dependent on the application, and can be
considered as a part of the overall risk assessment of the installation. Where the supplier of the Encoder(SR) is not
responsible for the driven equipment, the installation designer is responsible for the risk assessment, and for
specifying the functional and safety integrity requirements of the Encoder(SR).
This document applies to Encoder(SR) implementing safety sub-functions with a SIL not greater
than SIL 3.
This document provides additional information for Encoder(SR) claiming

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62061:2021(Main)
Safety of machinery - Functional safety of safety-related control systems (IEC 62061:2021)
EN IEC 62061:2021

This International Standard specifies requirements and makes recommendations for the design,
integration and validation of safety-related control systems (SCS) for machines. It is applicable
to control systems used, either singly or in combination, to carry out safety functions on
machines that are not portable by hand while working, including a group of machines working
together in a co-ordinated manner.
This document is a machinery sector specific standard within the framework of IEC 61508 (all
parts).
The design of complex programmable electronic subsystems or subsystem elements is not
within the scope of this document. This is in the scope of IEC 61508 or standards linked to it;
see Figure 1.
NOTE 1 Elements such as systems on chip or microcontroller boards are considered complex programmable
electronic subsystems.
The main body of this sector standard specifies general requirements for the design, and
verification of a safety-related control system intended to be used in high/continuous demand
mode.
This document:
– is concerned only with functional safety requirements intended to reduce the risk of
hazardous situations;
– is restricted to risks arising directly from the hazards of the machine itself or from a group
of machines working together in a co-ordinated manner;
NOTE 2 Requirements to mitigate risks arising from other hazards are provided in relevant sector standards.
For example, where a machine(s) is part of a process activity, additional information is available in IEC 61511.
This document does not cover
– electrical hazards arising from the electrical control equipment itself (e.g. electric shock –
see IEC 60204-1);
– other safety requirements necessary at the machine level such as safeguarding;
– specific measures for security aspects – see IEC TR 63074.
This document is not intended to limit or inhibit technological advancement.
Figure 1 illustrates the scope of this document.

  • Standard
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61010-2-202:2021(Main)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC 61010-2-202:2020)
EN IEC 61010-2-202:2021

IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related requirements of electrically operated valve ACTUATORs and SOLENOIDs. This document does not cover functional safety aspects of electrically operated ACTUATORs and SOLENOIDs.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61496-1:2020(Amendment)
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests (IEC 61496-1:2020)
EN IEC 61496-1:2020

This part of IEC 61496 specifies general requirements for the design, construction and testing
of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect
persons or part of a person as part of a safety-related system. Special attention is directed to
functional and design requirements that ensure an appropriate safety-related performance is
achieved. An ESPE can include optional safety-related functions, the requirements for which
are given in Annex A.
NOTE "Non-contact" means that physical contact is not required for sensing.
This document is intended to be used with a subsequent part of IEC 61496 that provides
particular requirements based on the sensing technology.
EXAMPLE This document and IEC 61496-2 are used for AOPDs; this document and IEC 61496-3 are used for
AOPDDRs.
Where a part covering the sensing technology does not exist, IEC TS 62998-1 is used.
Where the IEC 61496 series does not contain all necessary provisions, IEC TS 62998-1 is
used.
It is an additional possibility to combine those aspects covered by the IEC 61496 series in
addition to IEC TS 62998-1.
This document does not specify the dimensions or configuration of the detection zone and its
disposition in relation to hazards in any particular application, nor what constitutes a
hazardous state of any machine. It is restricted to the functioning of the ESPE and how it
interfaces with the machine.
While a data interface can be used to control optional safety-related ESPE functions
(Annex A), this document does not provide specific requirements. Requirements for these
safety-related functions can be determined by consulting other standards (for example,
IEC 61508 (all parts), IEC 62046, IEC 62061, and ISO 13849-1).
This document can be relevant to applications other than those for the protection of persons,
for example for the protection of machinery or products from mechanical damage. In those
applications, different requirements can be appropriate, for example when the materials that
have to be recognized by the sensing function have different properties from those of
persons.
This document does not deal with requirements for ESPE functions not related to the
protection of persons (e.g. using sensing unit data for navigation).
This document does not deal with electromagnetic compatibility (EMC) emission
requirements.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61496-2:2020(Amendment)
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2020)
EN IEC 61496-2:2020

This part of IEC 61496 specifies requirements for the design, construction and testing of
electro-sensitive protective equipment (ESPE) designed specifically to detect persons as part
of a safety-related system, employing active opto-electronic protective devices (AOPDs) for
the sensing function. Special attention is directed to features which ensure that an
appropriate safety-related performance is achieved. An ESPE can include optional safetyrelated
functions, the requirements for which are given in Annex A of IEC 61496-1:2020 and
of this document.
This document does not specify the dimensions or configurations of the detection zone and its
disposition in relation to hazardous parts for any particular application, nor what constitutes a
hazardous state of any machine. It is restricted to the functioning of the ESPE and how it
interfaces with the machine.
Excluded from this document are AOPDs employing radiation at wavelengths outside the
range 400 nm to 1 500 nm.
This document can be relevant to applications other than those for the protection of persons,
for example, the protection of machinery or products from mechanical damage. In those
applications, additional requirements can be necessary, for example, when the materials that
are to be recognized by the sensing function have different properties from those of persons.
This document does not deal with electromagnetic compatibility (EMC) emission
requirements.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62745:2017/A11:2020(Amendment)
Safety of machinery - Requirements for cableless control systems of machinery
EN 62745:2017/A11:2020

IEC 62745:2017(E) specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC IEC/TR 61511-4:2020(Main)
Functional safety - Safety instrumented systems for the process industry sector - Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2 (IEC/TR 61511-4:2020)
CLC IEC/TR 61511-4:2020

This part of IEC 61511, which is a Technical Report,
•   specifies the rationale behind all clauses and the relationship between them,
•   raises awareness for the most common misconceptions and misinterpretations of the clauses and the changes related to hem,
•   explains the differences between Ed. 1 and Ed. 2 of IEC 61511-1 and the reasons behind the changes,
•   presents high level summaries of how to fulfil the requirements of the clauses, and
•   explains differences in terminology between IEC 61508-4:2010 and IEC 61511-1 Ed. 2.

  • Technical report
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day