Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC 61010-2-202:2020)

IEC 61010-2-202:2020 is available as IEC 61010-2-202:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61010-2-202:2020 constitutes Part 2-202 of a planned series of standards on industrial-process measurement, control and automation equipment. Safety terms of general use are defined in IEC 61010-1. More specific terms are defined in each part. This part incorporates the safety related requirements of electrically operated valve ACTUATORs and SOLENOIDs. This document does not cover functional safety aspects of electrically operated ACTUATORs and SOLENOIDs.

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe (IEC 61010-2-202:2020)

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à commande électrique (IEC 61010-2-202:2020)

IEC 61010-2-202:2020 est disponible sous forme de IEC 61010-2-202:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61010-2-202:2020 constitue la Partie 2-202 d'une série de normes planifiées sur les appareils de mesure, commande et automation dans les processus industriels. Les termes de sécurité d'usage général sont définis dans l'IEC 61010-1. Des termes plus spécifiques sont définis dans chaque partie. Cette partie contient les exigences relatives à la sécurité des ACTIONNEURS et SOLENOÏDES à vanne à commande électrique. Le présent document ne couvre pas les aspects de sécurité fonctionnelle des ACTIONNEURS et SOLENOÏDES à commande électrique.

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov (IEC 61010-2-202:2020)

General Information

Status
Published
Public Enquiry End Date
19-Apr-2020
Publication Date
03-Mar-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Jan-2021
Due Date
28-Mar-2021
Completion Date
04-Mar-2021

RELATIONS

Buy Standard

Standard
SIST EN IEC 61010-2-202:2021
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 61010-2-202:2021
01-april-2021
Nadomešča:
SIST EN 61010-2-202:2017
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko
uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov (IEC 61010-2-
202:2020)

Safety requirements for electrical equipment for measurement, control and laboratory

use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC

61010-2-202:2020)

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2

-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe (IEC

61010-2-202:2020)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de

laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à

commande électrique (IEC 61010-2-202:2020)
Ta slovenski standard je istoveten z: EN IEC 61010-2-202:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
23.060.01 Ventili na splošno Valves in general
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN IEC 61010-2-202:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61010-2-202:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 61010-2-202:2021
EUROPEAN STANDARD EN IEC 61010-2-202
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 13.110; 17.020; 19.020 Supersedes EN 61010-2-202:2017 and all of its
amendments and corrigenda (if any)
English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-202: Particular requirements
for electrically operated valve actuators
(IEC 61010-2-202:2020)

Règles de sécurité pour appareils électriques de mesurage, Sicherheitsbestimmungen für elektrische Mess-, Steuer-,

de régulation et de laboratoire - Partie 2-202: Exigences Regel- und Laborgeräte - Teil 2-202: Besondere

particulières pour les actionneurs à vanne à commande Anforderungen für elektrisch betriebene Ventile und

électrique Stellantriebe
(IEC 61010-2-202:2020) (IEC 61010-2-202:2020)

This European Standard was approved by CENELEC on 2020-12-10. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 61010-2-202:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61010-2-202:2021
EN IEC 61010-2-202:2021 (E)
European foreword

The text of document 65/835/FDIS, future edition 2 of IEC 61010-2-202, prepared by IEC/TC 65

“Industrial-process measurement, control and automation” was submitted to the IEC-CENELEC

parallel vote and approved by CENELEC as EN IEC 61010-2-202:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2021–09–10

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2023–12–10

document have to be withdrawn

This document supersedes EN 61010-2-202:2017 and all of its amendments and corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission

and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this

document.
Endorsement notice

The text of the International Standard IEC 61010-2-202:2020 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 60730 (series) NOTE Harmonized as EN IEC 60730 (series)
IEC 60730-2-8:2018 NOTE Harmonized as EN IEC 60730-2-8:2020 (not modified)
IEC 60730-2-14:2017 NOTE Harmonized as EN IEC 60730-2-14:2019 (not modified)
---------------------- Page: 4 ----------------------
SIST EN IEC 61010-2-202:2021
EN IEC 61010-2-202:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
The Annex ZA of EN 61010-1:2010/A1:2019 applies.
---------------------- Page: 5 ----------------------
SIST EN IEC 61010-2-202:2021
EN IEC 61010-2-202:2021 (E)
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered

This European Standard has been prepared under a Commission’s standardization request relating to

harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means

of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the

Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the

making available on the market of electrical equipment designed for use within certain voltage limits

[2014 OJ L96].

Once this standard is cited in the Official Journal of the European Union under that Directive,

compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of

the scope of this standard, a presumption of conformity with the corresponding safety objectives of

that Directive, and associated EFTA regulations.

Table ZZ.1 — Correspondence between this European standard and Annex I of Directive

2014/35/EU [2014 OJ L96]
Clause(s) / sub-
Safety objectives of Directive
clause(s)
Remarks / Notes
2014/35/EU (Annex I)
of this EN
1. General conditions
1 (a) the essential characteristics, the 5.1
recognition and observance of which will
5.2
ensure that electrical equipment will be
5.3
used safely and in applications for which it
5.4
was made, shall be marked on the
electrical equipment, or, if this is not
possible, on an accompanying document
1 (b) the electrical equipment, together 5.4
with its component parts, shall be made in
6.6
such a way as to ensure that it can be
6.10
safely and properly assembled and
6.11
connected
Annex F
1 (c) the electrical equipment shall be so 5.4
designed and manufactured as to ensure
Annex F
that protection against the hazards set out
17 (for hazards
in points 2 and 3 is ensured, providing that
not covered by
the equipment is used in applications for
Clauses 6–16)
which it was made and is adequately
See also the
maintained
details in points 2
and 3
---------------------- Page: 6 ----------------------
SIST EN IEC 61010-2-202:2021
EN IEC 61010-2-202:2021 (E)
Clause(s) / sub-
Safety objectives of Directive
clause(s)
Remarks / Notes
2014/35/EU (Annex I)
of this EN
2. Protection against hazards arising from the electrical equipment

Measures of a technical nature shall be laid down in accordance with point 1, in order to ensure that:

2 (a) persons and domestic animals are 4, 6.1 – 6.11, 9.6,
adequately protected against the danger 11.6, 14.4
of physical injury or other harm which
Annex D,
might be caused by direct or indirect
Annex F,
contact
Annex K
2 (b) temperatures, arcs or radiation which 4,
would cause a danger, are not produced
6.3.1.b) 2),
6.3.2 b) 2),
9.5, 9.6, 10.1
−10.5, 12
2 (c) persons, domestic animals and 4, 7.2–7.7, 9,
property are adequately protected against 12.3, 12.5, 12.6,
non-electrical dangers caused by the 13.1, 13.2, 16.2
electrical equipment which are revealed
by experience
2 (d) the insulation is suitable for 4, 6.7,
foreseeable conditions
Annex K

3. Protection against hazards which may be caused by external influences on the electrical

equipment

Technical measures shall be laid down in accordance with point 1, in order to ensure that the electrical

equipment:
3 (a) meets the expected mechanical 4, 7, 8
requirements in such a way that persons,
domestic animals and property are not
endangered
3 (b) is resistant to non-mechanical 1.4, 4, 6.7.2.2.1,
influences in expected environmental 10.5, 11.6,
conditions, in such a way that persons,
14.3, 14.8, 15
domestic animals and property are not
endangered
3 (c) does not endanger persons, 4, 9, 14, 16.1
domestic animals and property in
foreseeable conditions of overload

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journal of the European

Union.

WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of

this standard.
---------------------- Page: 7 ----------------------
SIST EN IEC 61010-2-202:2021
---------------------- Page: 8 ----------------------
SIST EN IEC 61010-2-202:2021
IEC 61010-2-202
Edition 2.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Safety requirements for electrical equipment for measurement, control
and laboratory use –
Part 2-202: Particular requirements for electrically operated valve actuators
Exigences de sécurité pour appareils électriques de mesurage, de regulation
et de laboratoire –
Partie 2-202: Exigences particulières pour les actionneurs à vanne à commande
électrique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.110; 17.020; 19.020 ISBN 978-2-8322-8984-6

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN IEC 61010-2-202:2021
– 2 – IEC 61010-2-202:2020 © IEC 2020
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 5

1 Scope and object ............................................................................................................. 6

2 Normative references ...................................................................................................... 7

3 Terms and definitions ...................................................................................................... 7

4 Tests ............................................................................................................................... 7

5 Marking and documentation ............................................................................................. 8

6 Protection against electric shock ..................................................................................... 9

7 Protection against mechanical HAZARDS ........................................................................... 9

8 Resistance to mechanical stresses ................................................................................ 10

9 Protection against the spread of fire .............................................................................. 10

10 Equipment temperature limits and resistance to heat ..................................................... 10

11 Protection against HAZARDS from fluids and solid foreign objects ................................... 10

12 Protection against radiation, including laser sources, and against sonic and

ultrasonic pressure ........................................................................................................ 10

13 Protection against liberated gases and substances, explosion and implosion ................ 10

14 Components and subassemblies ................................................................................... 11

15 Protection by interlocks ................................................................................................. 11

16 HAZARDS resulting from application ................................................................................ 11

17 RISK assessment ........................................................................................................... 11

Annexes ............................................................................................................................... 12

Bibliography .......................................................................................................................... 13

---------------------- Page: 10 ----------------------
SIST EN IEC 61010-2-202:2021
IEC 61010-2-202:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT
FOR MEASUREMENT, CONTROL AND LABORATORY USE –
Part 2-202: Particular requirements
for electrically operated valve actuators
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.
4) In order to promote international uni
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.