SIST EN 13232-2:2004/kFprA1:2011

Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design

This part of this European Standard covers the following subjects:
- geometric design principles for wheel guidance;
- definition of basic limits of supply;
- applied forces and their adequate support;
- tolerance levels.
These are illustrated herein by application to a turnout. The main switch and crossing components are represented in turnouts and the principles used in turnouts apply equally to more complex layouts.

Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 2: Anforderungen an den technischen Entwurf

Applications ferroviaires - Voie - Appareil de voie - Partie 2: Exigences pour la conception géométrique

Železniške naprave - Zgornji ustroj - Kretnice in križišča - 2.del: Geometrijske zahteve pri projektiranju

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Jul-2011
• ICS: 45.080 - Rails and railway components
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 10-Feb-2014
• Due Date: 15-Feb-2014
• Completion Date: 10-Feb-2014
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Ref Project: EN 13232-2:2003/FprA1 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design

Relations

• Consolidated By: SIST EN 13232-2:2004+A1:2012 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
• Effective Date: 18-Jan-2023
• Amends: SIST EN 13232-2:2004 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
• Effective Date: 12-Jun-2010
• Consolidated By: SIST EN 13232-2:2004+A1:2012 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 13232-2:2004+A1:2012 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
• Effective Date: 20-Aug-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13232-2:2004/kFprA1:2011
01-julij-2011
äHOH]QLãNHQDSUDYH=JRUQMLXVWURM.UHWQLFHLQNULåLãþDGHO*HRPHWULMVNH
]DKWHYHSULSURMHNWLUDQMX
Railway applications - Track - Switches and crossings - Part 2: Requirements for
geometric design
Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 2: Anforderungen an
den technischen Entwurf
Applications ferroviaires - Voie - Appareil de voie - Partie 2: Exigences pour la
conception géométrique
Ta slovenski standard je istoveten z: EN 13232-2:2003/FprA1
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
SIST EN 13232-2:2004/kFprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13232-2:2004/kFprA1:2011

---------------------- Page: 2 ----------------------

SIST EN 13232-2:2004/kFprA1:2011


EUROPEAN STANDARD
FINAL DRAFT
EN 13232-2:2003
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2011
ICS 93.100
English Version
Railway applications - Track - Switches and crossings - Part 2:
Requirements for geometric design
Applications ferroviaires - Voie - Appareil de voie - Partie 2: Bahnanwendungen - Oberbau - Weichen und Kreuzungen -
Exigences pour la conception géométrique Teil 2: Anforderungen an den technischen Entwurf
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13232-2:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-2:2003/FprA1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13232-2:2004/kFprA1:2011
EN 13232-2:2003/FprA1:2011 (E)
Contents Page
Foreword . 3
1 Modification to the Foreword . 4
2 Addition of Annex ZA . 4


2

---------------------- Page: 4 ----------------------

SIST EN 13232-2:2004/kFprA1:2011
EN 13232-2:2003/FprA1:2011 (E)
Foreword
This document (EN 13232-2:2003/FprA1:2011) has been prepared by Technical Committee
CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
3

---------------------- Page: 5 ----------------------

SIST EN 13232-2:2004/kFprA1:2011
EN 13232-2:2003/FprA1:2011 (E)
1 Modification to the Foreword
Add the following paragraphs after the second paragraph: "
This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive 2008/57/EC.
For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of
this document.".
2 Addition of Annex ZA
Add the following new Annex ZA: "
4

---------------------- Page: 6 ----------------------

SIST EN 13232-2:
...