Railway infrastructure - Rail fastening systems - Part 4: Test methods for resistance to repeated loading (ISO 22074-4:2022)

This document specifies a laboratory test procedure for applying repeated load cycles which generate displacement cycles representative of the displacements caused by traffic on railway track. It is used for assessing the long-term performance of rail fastening systems.
This document is applicable to surface mounted rail on sleepers, bearers and slab track and embedded rail.
This test procedure applies to a complete fastening assembly.

Bahninfrastruktur - Schienenbefestigungssysteme - Teil 4: Prüfverfahren bei wiederkehrenden Belastungen (ISO 22074-4:2022)

Dieses Dokument legt ein Laborprüfverfahren zur Aufbringung wiederkehrender Lastzyklen fest, die Verformungen repräsentieren, wie sie vom Verkehr auf Eisenbahngleisen verursacht werden. Es wird zur Bewertung des Langzeitverhaltens von Schienenbefestigungssystemen verwendet.
Dieses Dokument ist für kraftschlüssig verbundene Schienen auf Schwellen, Weichenschwellen und schotterlosen Oberbau sowie für eingebettete Schienen anwendbar.
Das Prüfverfahren ist anwendbar für ein komplettes Schienenbefestigungssystem.

Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 4: Méthode d'essai pour la détermination de résistance aux charges répétitives (ISO 22074-4:2022)

Le présent document spécifie la procédure d'essai en laboratoire pour l'application de cycles de charges répétitives qui génèrent des cycles de déplacements représentatifs des déplacements engendrés par le trafic ferroviaire. Elle a pour objet d'évaluer les performances à long terme des systèmes de fixation du rail.
Ce document s'applique aux rails montés en surface sur des traverses, des supports et des voies sans ballast, ainsi qu'aux rails enrobés.
Cette procédure d'essai s'applique aux systèmes de fixation complets.

Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 4. del: Preskusne metode za določanje odpornosti na ponavljajoče se obremenitve (ISO 22074-4:2022)

Ta dokument določa laboratorijski preskusni postopek za uporabo ponavljajočih se obremenitvenih ciklov, ki predstavljajo premike zgornjega ustroja železnice, ki jih povzroča promet. Uporablja se za oceno dolgoročnega delovanja sistemov za pritrjevanje tirnic.
Ta dokument se uporablja za tirnice, nameščene na prage, nosilno ogrodje ter vgrajene tirnice.
Ta preskusni postopek se uporablja za celoten pritrdilni sestav.

General Information

Status
Published
Public Enquiry End Date
28-Feb-2023
Publication Date
15-Apr-2024
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Apr-2024
Due Date
14-Jun-2024
Completion Date
16-Apr-2024

Buy Standard

Standard
EN ISO 22074-4:2024
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 22074-4:2024
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22074-4:2024
01-maj-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 4. del: Preskusne metode
za določanje odpornosti na ponavljajoče se obremenitve (ISO 22074-4:2022)
Railway infrastructure - Rail fastening systems - Part 4: Test methods for resistance to
repeated loading (ISO 22074-4:2022)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 4: Prüfverfahren bei
wiederkehrenden Belastungen (ISO 22074-4:2022)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 4: Méthode d'essai pour la
détermination de résistance aux charges répétitives (ISO 22074-4:2022)
Ta slovenski standard je istoveten z: EN ISO 22074-4:2024
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN ISO 22074-4:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22074-4:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 22074-4:2024


EN ISO 22074-4
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2024
EUROPÄISCHE NORM
ICS 45.080
English Version

Railway infrastructure - Rail fastening systems - Part 4:
Test methods for resistance to repeated loading (ISO
22074-4:2022)
Infrastructure ferroviaire - Systèmes de fixation du rail Bahninfrastruktur - Schienenbefestigungssysteme -
- Partie 4: Méthode d'essai pour la détermination de Teil 4: Prüfverfahren bei wiederkehrenden
résistance aux charges répétitives (ISO 22074-4:2022) Belastungen (ISO 22074-4:2022)
This European Standard was approved by CEN on 23 March 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22074-4:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22074-4:2024
EN ISO 22074-4:2024 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22074-4:2024
EN ISO 22074-4:2024 (E)
European foreword
The text of ISO 22074-4:2022 has been prepared by Technical Committee ISO/TC 269 “Railway
applications” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22074-4:2024 by Technical Committee CEN/TC 256 “Railway applications” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement
...

SLOVENSKI STANDARD
oSIST prEN ISO 22074-4:2024
01-februar-2023
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 4. del: Preskusne metode
za določanje odpornosti na ponavljajoče se obremenitve (ISO 22074-4:2022)
Railway infrastructure - Rail fastening systems - Part 4: Test methods for resistance to
repeated loading (ISO 22074-4:2022)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 4: Prüfverfahren bei
wiederkehrenden Belastungen (ISO 22074-4:2022)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 4: Méthode d'essai pour la
détermination de résistance aux charges répétitives (ISO 22074-4:2022)
Ta slovenski standard je istoveten z: prEN ISO 22074-4
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN ISO 22074-4:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 22074-4:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 22074-4:2024
INTERNATIONAL ISO
STANDARD 22074-4
First edition
2022-08
Railway infrastructure — Rail
fastening systems —
Part 4:
Test methods for resistance to
repeated loading
Infrastructure ferroviaire — Systèmes de fixation du rail —
Partie 4: Méthode d'essai pour la détermination de résistance aux
charges répétitives
Reference number
ISO 22074-4:2022(E)
© ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 22074-4:2024
ISO 22074-4:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 22074-4:2024
ISO 22074-4:2022(E)
Contents Page
Foreword .iv
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 Terms and definitions . 1
4 S y mb ol s . 2
5 Te s t pr o c e du r e .3
5.1 G eneral principle . 3
5 . 2 A pp a r at u s . 4
5 . 2 .1 R a i l . 4
5 . 2 . 2 Ac t u at or . 4
5.2.3 L oad application head . 4
5.2.4 Displacement measuring instruments . 4
5.2.5 Force measuring instruments .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.