oSIST prEN IEC 62862-1-5:2023
(Main)Solar thermal electric plants - Part 1-5: Performance code test for solar thermal electric plants
Solar thermal electric plants - Part 1-5: Performance code test for solar thermal electric plants
IEC 62862-1-5:2024 provide procedures and guidelines to carry out acceptance tests for solar thermal power plants, of any concentration technology, with the uncertainty level given in ISO/IEC Guide 98-3.
This document establishes the measurements, instrumentation and techniques required for determining the following performance parameters for a given period:
- available solar radiation energy,
- plant electricity consumptions,
- net electricity generation,
- non-solar energy,
- net plant efficiency.
This document specifies the characteristics of a calculation tool that serves as a reference for expected electricity production during the test period and under real-time solar irradiance and other meteorological data.
This document is applicable to solar thermal power plants of any size using any concentration technology, where the sun is the main source of energy, and all elements and systems are operative. Such power plants can optionally have non-solar energy sources, such as natural gas or other renewable energies, and a thermal storage system.
This document is applicable to acceptance testing in such power plants, as well as in any other scenario in which their performance must be known.
Solarthermische Kraftwerke – Teil 1-5: Leistungstest für solarthermische Kraftwerke
Centrales électriques solaires thermiques - Partie 1-5 : Essai du code de performance pour les centrales électriques thermosolaires
IEC 62862-1-5:2024 fournir des procédures et des lignes directrices pour effectuer des essais de réception des centrales électriques solaires thermodynamiques, de toute technologie de concentration, avec le niveau d’incertitude indiqué dans le Guide ISO/IEC 98-3.
Le présent document établit les mesurages, l’instrumentation et les techniques exigés pour déterminer les paramètres de performance suivants pour une période donnée:
- énergie de rayonnement solaire disponible,
- consommations électriques de la centrale,
- production nette d’électricité,
- énergie non solaire,
- rendement net de la centrale
Le présent document spécifie les caractéristiques d’un outil de calcul qui sert de référence pour la production d’électricité prévue dans la période d’essai et sous l’éclairement solaire en temps réel, et compte tenu d’autres données météorologiques.
Le présent document s’applique aux centrales électriques solaires thermodynamiques de toute taille qui utilisent toute technologie de concentration, avec lesquelles le soleil est la principale source d’énergie et tous les éléments et systèmes fonctionnent.
Le présent document s’applique aux essais de réception dans de telles centrales, ainsi que dans tout autre scénario dans lequel leurs performances doivent être connues.
Sončne termoelektrarne - 1-5. del: Preskus postopkov merjenja učinkovitosti za sončne termoelektrarne
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62862-1-5:2023
01-julij-2023
Sončne termoelektrarne - 1-5. del: Preskus postopkov merjenja učinkovitosti za
sončne termoelektrarne
Solar thermal electric plants - Part 1-5: Performance code test for solar thermal electric
plants
Centrales électriques solaires thermiques - Partie 1-5 : Essai du code de performance
pour les centrales électriques thermosolaires
Ta slovenski standard je istoveten z: prEN IEC 62862-1-5:2023
ICS:
27.160 Sončna energija Solar energy engineering
oSIST prEN IEC 62862-1-5:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62862-1-5:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62862-1-5:2023
117/177/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62862-1-5 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-05-12 2023-08-04
SUPERSEDES DOCUMENTS:
117/170/CD, 117/176/CC
IEC TC 117 : SOLAR THERMAL ELECTRIC PLANTS
SECRETARIAT: SECRETARY:
Spain Ms Lourdes González Martínez
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in this
CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are aware
and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses. (see
AC/22/2007 or New Guidance.doc).
TITLE:
Solar thermal electric plants – Part 1-5: Performance code test for solar thermal electric plants
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62862-1-5:2023
– 2 – IEC CDV 62862-1-5 © IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols . 8
5 Performance reference . 9
5.1 Requirements . 9
5.2 Simulation model . 10
6 General test guidelines . 11
6.1 Test procedure. 11
6.2 Guidelines for each type of test . 12
6.2.1 Short-duration tests . 13
6.2.2 Long-duration tests . 13
6.3 Test boundary . 14
7 Instruments and methods
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.