SIST EN 12674-4:2015
(Main)Roll containers - Part 4: Performance requirements
Roll containers - Part 4: Performance requirements
This European Standard specifies appropriate tests and levels of performance for roll containers and dollies manufactured in all materials, assembled for use and stacked for storage when tested in accordance with EN 12674-3.
Rollbehälter - Teil 4: Leistungsanforderungen
Diese Europäische Norm legt geeignete Prüfungen und Leistungsstufen für aus allen Werkstoffen hergestellte Rollbehälter und Rollböcke, die für eine Anwendung vorgesehen und für eine Lagerung gestapelt sind, fest, wenn diese nach EN 12674 3 geprüft wurden.
Conteneurs à roulettes - Partie 4: Exigences de performances
La présente Norme européenne spécifie les essais appropriés et les niveaux de performances s’appliquant aux conteneurs à roulettes et aux plateaux roulants constitués de tous matériaux, prêts à l’emploi et empilés pour le stockage, lorsqu’ils sont soumis aux essais conformément à EN 12674-3.
Kontejnerji s kolesi - 4. del: Zahtevane lastnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontejnerji s kolesi - 4. del: Zahtevane lastnostiRollbehälter - Teil 4: LeistungsanforderungenConteneurs à roulettes - Partie 4: Exigences de performancesRoll containers - Part 4: Performance requirements55.180.10General purpose containersICS:Ta slovenski standard je istoveten z:EN 12674-4:2015SIST EN 12674-4:2015en,fr,de01-julij-2015SIST EN 12674-4:2015SLOVENSKI
STANDARDSIST EN 12674-4:20071DGRPHãþD
SIST EN 12674-4:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12674-4
April 2015 ICS 55.180.10 Supersedes EN 12674-4:2006English Version
Roll containers - Part 4: Performance requirements
Conteneurs à roulettes - Partie 4: Exigences de performances
Rollbehälter - Teil 4: Leistungsanforderungen This European Standard was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12674-4:2015 ESIST EN 12674-4:2015
EN 12674-4:2015 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Sampling of roll containers to be tested .6 4.1 Sequence of tests .6 4.2 Applicability of normative tests .6 5 Performance requirements – normative tests .8 5.1 Stability tests (4.2.1 of EN 12674-3:2004) .8 5.1.1 General .8 5.1.2 Dolly - dummy load .8 5.1.3 Dolly - stacked empty .8 5.1.4 Roll container (unloaded) .8 5.1.5 Roll container (dummy load) .8 5.2 Diagonal resistance test (4.2.2 of EN 12674-3:2004) .8 5.3 Strength and stiffness of roll container sides (4.2.3 of EN 12674-3:2004) .9 5.4 Side frame to base cantilever test (4.2.4 of EN 12674-3:2004) .9 5.5 Castor lateral load resistance test (4.2.5 of EN 12674-3:2004) .9 5.6 Distributed load floor test (4.2.6 of EN 12674-3:2004).9 5.7 Localised edge impact loading on floor test (4.2.7 of EN 12674-3:2004) .9 5.8 Localised side/end base test (4.2.8 of EN 12674-3:2004) .9 5.9 Free fall drop test (4.2.9 of EN 12674-3:2004) .9 5.9.1 Method 1 (drop) .9 5.9.2 Method 2 (compression version) .9 5.10 Starting and rolling resistance test (4.2.10 of EN 12674-3:2004) . 10 5.10.1 Tests 1 to 4 (specimen unloaded) . 10 5.10.2 Tests 1 to 4 (specimen loaded) . 10 5.11 Stacking test (4.2.11 of EN 12674-3:2004) . 10 5.12 Mechanical lifting test (4.2.12 of EN 12674-3:2004) . 10 6 Performance requirements – optional tests . 10 6.1 Fatigue of welded joints - side frame to infill (4.3.1 of EN 12674-3:2004) . 10 6.2 Strength of welded joints - infill to infill (4.3.2 of EN 12674-3:2004) . 10 6.3 Strength and stiffness of frame infill (4.3.3 of EN 12674-3:2004) . 10 6.4 Tensile resistance of strap/buckle (4.3.4 of EN 12674-3:2004) . 10
SIST EN 12674-4:2015
EN 12674-4:2015 (E) 3 Foreword This document (EN 12674-4:2015) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12674-4:2006. The only technical change since the latest edition concerns the following point: — modifications in the wording of the second paragraph in 5.2. This European Standard is part of a series of four standards for roll containers and dollies. The other parts are entitled as follows: — Roll containers – Part 1 – Terminology — Roll containers – Part 2 – General design and safety principles — Roll containers – Part 3 – Test methods According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12674-4:2015
EN 12674-4:2015 (E) 4 Introduction Roll containers and dollies are equipment intended for moving goods. They comprise apparatus fitted with fixed and/or swivel castors. For roll containers the superstructure comprises two or more frames which provide retention for items requiring transport and/or distribution. Dollies and roll containers can be supplied in a variety of materials and additionally roll containers are supplied in four main styles. One of these styles, the Nesting style, is further sub-divided into five derived forms and the Demountable style is sub-divided into two derived forms. EN 12674-1 gives details of how these styles differ. EN 12674-2 gives methods of measuring working dimensions and aspects of design that manufacturers need to be aware of. Test methods are given in EN 12674-3 which are supported by performance levels in this Part 4, which take account of the normal static and dynamic loads applied in use. This European Standard specifies minimum levels of performance for critical tests, in particular with reference to safety. Certain tests which are related only to longevity, quality control or need development are optional and if carried out may be subject to agreement between manufacturer and user. Tests are applied to fully assembled roll container and dolly specimens as indicated in Table 1. Dismantled or nested roll containers are not subjected to testing; however, empty dollies stacked ready for use, storage or transit need to be subjected to normative testing in order to determine a safe number of stacked units. In order to calculate applied test loads a nominal safe working load (SWL) of 250 kg is assumed in this European Standard for every specimen. The value of 250 kg is not a normative level and may be reduced or increased by the testing body in collaboration with the specimen supplier/manufacturer. However, if different, the level used should be clearly stated in the test report. SIST EN 12674-4:2015
EN 12674-4:2015 (E) 5 1 Scope This European Standard specifies appropriate tests and levels of performance for roll containers and dollies manufactured in all materials, assembled for use and stacked for storage when teste
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.