SIST EN 61837-4:2015

Surface mounted piezoelectric devices for frequency control and selection - Standard outline and terminal lead connections - Part 4: Hybrid enclosure outline

This part of IEC 61837 specifies the outline drawings and terminal lead connections for surface
piezoelectric devices with hybrid enclosure outlines and is based on IEC 61240:2012 which
standardized layout rules of outline drawings of surface-mounted device.

Oberflächenmontierbare piezoelektrische Bauteile zur Frequenzstabilisierung und -selektion - Norm-Gehäusemaße und Anschlüsse - Teil 4: Hybridgehäuse

Dispositifs piézoélectriques à montage en surface pour la commande et le choix de la fréquence - Encombrements normalisés et connexions des sorties - Partie 4: Encombrements des enveloppes hybrides

L'IEC 61837-4:2015 spécifie les dessins d'encombrement et les connexions des sorties pour les dispositifs piézoélectriques à montage en surface avec les encombrements d'enveloppes hybrides, et est fondée sur l'IEC 61240:2012, qui a normalisé les règles de tracé des dessins d'encombrement des dispositifs à montage en surface. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- Le dessin d'encombrement est défini comme un ensemble de dessins composé de quatre vues, à savoir la vue de dessus, la vue de face, la vue de droite et la vue de dessous, à la place de l'ensemble des trois vues prévu dans la version précédente.
- Les configurations des enveloppes ont été révisées comme indiqué au Tableau 1.

Površinsko nameščeni piezoelektrični elementi za stabilizacijo in izbiranje frekvence - Standardne mere in priključni izvodi - 4. del: Mere hibridnega okrova

Ta del standarda IEC 61837 določa tehnične risbe in priključne izvode za površinske piezoelektrične elemente s hibridnimi okrovi in je osnovan na standardu IEC 61240:2012, ki je standardiziral osnovna pravila tehničnih risb površinsko montiranih naprav.

General Information

• Status: Published
• Publication Date: 13-Aug-2015
• ICS: 31.140 - Piezoelectric devices
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Jun-2015
• Due Date: 20-Aug-2015
• Completion Date: 14-Aug-2015
• Ref Project: EN 61837-4:2015 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines

Relations

• Replaces: SIST EN 61837-4:2005 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections -- Part 4: Hybrid enclosure outlines
• Effective Date: 01-Sep-2015
• Replaces: SIST EN 61837-4:2005 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections -- Part 4: Hybrid enclosure outlines
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61837-4:2015
01-september-2015
1DGRPHãþD
SIST EN 61837-4:2005
3RYUãLQVNRQDPHãþHQLSLH]RHOHNWULþQLHOHPHQWL]DVWDELOL]DFLMRLQL]ELUDQMH
IUHNYHQFH6WDQGDUGQHPHUHLQSULNOMXþQLL]YRGLGHO0HUHKLEULGQHJDRNURYD
Surface mounted piezoelectric devices for frequency control and selection - Standard
outline and terminal lead connections - Part 4: Hybrid enclosure outline
Oberflächenmontierbare piezoelektrische Bauteile zur Frequenzstabilisierung und -
selektion - Norm-Gehäusemaße und Anschlüsse - Teil 4: Hybridgehäuse
Dispositifs piézoélectriques à montage en surface pour la commande et le choix de la
fréquence - Encombrements normalisés et connexions des sorties - Partie 4:
Encombrements des enveloppes hybrides
Ta slovenski standard je istoveten z: EN 61837-4:2015
ICS:
31.140 3LH]RHOHNWULþQHLQ Piezoelectric and dielectric
GLHOHNWULþQHQDSUDYH devices
SIST EN 61837-4:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61837-4:2015

---------------------- Page: 2 ----------------------

SIST EN 61837-4:2015


EUROPEAN STANDARD EN 61837-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 31.140 Supersedes EN 61837-4:2004
English Version
Surface mounted piezoelectric devices for frequency control and
selection - Standard outlines and terminal lead connections -
Part 4: Hybrid enclosure outlines
(IEC 61837-4:2015)
Dispositifs piézoélectriques à montage en surface pour la Oberflächenmontierbare piezoelektrische Bauteile zur
commande et le choix de la fréquence - Encombrements Frequenzstabilisierung und -selektion - Norm-
normalisés et connexions des sorties - Gehäusemaße und Anschlüsse -
Partie 4: Encombrements des enveloppes hybrides Teil 4: Hybridgehäuse
(IEC 61837-4:2015) (IEC 61837-4:2015)
This European Standard was approved by CENELEC on 2015-05-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61837-4:2015 E

---------------------- Page: 3 ----------------------

SIST EN 61837-4:2015
EN 61837-4:2015 - 2 -
Foreword
The text of document 49/1117/FDIS, future edition 2 of IEC 61837-4, prepared by
IEC/TC 49 "Piezoelectric, dielectric and electrostatic devices and associated materials for frequency
control, selection and detection" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61837-4:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-02-01
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-05-01
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61837-4:2004.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61837-4:2015 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61837-4:2015
- 3 - EN 61837-4:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 61240 2012 Piezoelectric devices - Preparation of EN 61240 2012
outline drawings of surface-mounted
devices (SMD) for frequency control and
selection - General rules

---------------------- Page: 5 ----------------------

SIST EN 61837-4:2015

---------------------- Page: 6 ----------------------

SIST EN 61837-4:2015



IEC 61837-4

®


Edition 2.0 2015-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Surface mounted piezoelectric devices for frequency control and selection –

Standard outlines and terminal lead connections –

Part 4: Hybrid enclosure outlines




Dispositifs piézoélectriques à montage en surface pour la commande et le choix

de la fréquence – Encombrements normalisés et connexions des sorties –


Partie 4: Encombrements des enveloppes hybrides













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 31.140 ISBN 978-2-8322-2428-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61837-4:2015
– 2 – IEC 61837-4:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references. 5
3 Configuration of enclosures . 5
4 Dimensions of surface mounted piezoelectric devices with hybrid enclosure outlines
. 5
5 Table of detailed dimensions . 5
6 Designation of surface mounted piezoelectric devices with hybrid enclosure outlines
. 6

Table 1 – Revised Configuration . 6
Table 2 – Designation of surface mounted piezoelectric devices with hybrid enclosure
outline . 6
Table 3 – Lead connections . 7

---------------------- Page: 8 ----------------------

SIST EN 61837-4:2015
IEC 61837-4:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SURFACE MOUNTED PIEZOELECTRIC DEVICES
FOR FREQUENCY CONTROL AND SELECTION –
STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS –

Part 4: Hybrid enclosure outlines

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach
...