SIST EN 13166:2002
(Main)Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
This European Standard specifies the requirements for factory made products of phenolic foam, with or without facings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards. The standard describes product characteristics and includes procedures for testing, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the structural performance of systems incorporating these products is not covered.
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation
Diese Europäische Norm legt die Anforderungen für werkmäßig hergestellte Produkte aus Phenolharzschaum mit ode ohne Kaschierung fest, die für die Wârmedämmung von Gebäuden benutzt werden. Die Produkte werden in der Form von Platten und Laminaten hergestellt. Diese Norm beschreibt die Stoffeigenschaften und enthält die Prüfverfahren und Festlegungen für die Beurteilung der Konformität, die Kennzeichnung und die Etikettierung. In dieser Norm beschriebene Produkte werden auch in vorgefertigten Wärmedämmsystemen und Mehrschicht-Verbundplatten angewendet; die Eigenschaften von Systemen, in die diese Produkte integriet sind, werden nicht behandelt. Diese Norm legt keine Anforderungsniveaus für eine Vorgegebene Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Für bestimmte Anwendungen benötigte Anforderungen können Regelwerken oder übereinstimmenden Normen entnommen werden. Diese Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger ist als 0,40 m² . K/W oder deren Nennwert der Wärmeleitfähigkeit größer ist als 0,050 W/(m.K) bei 10°C Mitteltemperatur. Diese Norm gilt nicht für in situ-Dämmstoffe und für Produkte, die zur Dämmung von haustechnischen und betriebstechnischen Anlagen bestimmt sind, oder Produkte, die zur Schalldämmung bestimmt sind.
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse phénolique (PF) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en mousse phénolique, avec ou sans parements, utilisés pour l'isolation thermique des bâtiments. Les produits sont fabriqués sous forme de panneaux et de produits feuilletés.
La présente norme décrit les caractéristiques du produit et inclut les procédures d'essai, d'évaluation de la conformité, de marquage et d'étiquetage.
Les produits du domaine d'application de la présente norme sont également utilisés dans des systèmes d'isolation thermique et dans des panneaux composites préfabriqués; la performance des systèmes dans lesquels entrent ces produits n'est pas définie.
La présente norme ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l'emploi dans une application particulière. Les niveaux requis pour une application donnée figurent dans les réglementations ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,40 m2·K/W ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,050 W/(m×K) ne sont pas du domaine d'application de la présente norme.
Les produits mis en ¿uvre in situ et ceux destinés à être utilisés pour l'isolation des équipements du bâtiment et des installations industrielles ainsi que les produits destinés à l'isolation acoustique ne sont pas du domaine d'application de la présente norme.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz fenolne pene (PF) - Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - SpecificationToplotnoizolacijski proizvodi za stavbe - Proizvodi iz fenolne pene (PF) - SpecifikacijaProduits isolants thermiques pour le bâtiment - Produits manufacturés en mousse phénolique (PF) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation91.100.60Thermal and sound insulating materialsICS:SIST EN 13166:2002enTa slovenski standard je istoveten z:EN 13166:200101-marec-2002SIST EN 13166:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13166May 2001ICS 91.100.60English versionThermal insulation products for buildings - Factory madeproducts of phenolic foam (PF) - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en mousse phénolique (PF) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus Phenolharzschaum (PF) - SpezifikationThis European Standard was approved by CEN on 16 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13166:2001 E
Page 2EN 13166:2001ContentsPageForeword.31Scope.42Normative references.43Terms, definitions, symbols, units and abbreviated terms.54Requirements.75Test methods.126Designation code.147Evaluation of conformity.148Marking and labelling.15Annex A (normative)
Determination of the declared values of thermal resistance and thermalconductivity.16Annex B (normative)
Factory production control.18Annex C (normative)
Determination of the aged values of thermal resistance and thermal conductivity21Annex D (informative)
Additional properties.25Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.26TablesTable 1 – Tolerances for length and width.8Table 2 – Classes for thickness tolerances.8Table 3 – Tolerances for deviation from flatness.9Table 4 – Levels for compressive strength.10Table 5 – Levels for short term water absorption by partial immersion.11Table 6 – Levels for long term water absorption by partial immersion.11Table 7 – Test methods, specimens and conditions.13Table A.1 – Values for k for one side 90 % tolerance interval with a confidence level of 90 %.17Table B.1 – Minimum product testing frequencies.18Table B.2 – Minimum product testing frequencies for the reaction to fire characteristics.19Table C.1 – Test times for product thicknesses.22Table D.1 – Test methods, test specimens, conditions and minimum testing frequencies.25Table ZA.1 – Relevant clauses.27Table ZA.2.1 – Systems of attestation of conformity of factory made products for any intended use.28Table ZA.2.2 – Systems of attestation of conformity of factory made products for uses subject toregulations on reaction to fire.28Table ZA.3 – Example CE marking information.30
Page 3EN 13166:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 88 "Thermal insulationmaterials and products", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by November 2001, and conflicting national standards shall bewithdrawn at the latest by March 2003.This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard contains five annexes:Annex A
(normative)Determination of the declared values of thermal resistance and thermalconductivity;Annex B
(normative)Factory production control;Annex C
(normative)Determination of the aged value of thermal resistance and thermal conductivity;Annex D
(informative)Additional properties;Annex ZA (informative)Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.This European Standard is one of a series of standards for insulation products used in buildings, but thisstandard may be used in other areas where appropriate.In pursuance of Resolution BT20/1993 revised, CEN/TC 88 have proposed defining the standards listedbelow as a package of European Standards, setting (21 months after availability) as the date of withdrawal(dow) of national standards which conflict with the European Standards of this package.The package of standards comprises the following group of interrelated standards for the specifications offactory made thermal insulation products, all of which come within the scope of CEN/TC 88:EN 13162, Thermal insulation products for buildings – Factory made mineral wool (MW) products –Specification.EN 13163, Thermal insulation products for buildings – Factory made products of expanded polystyrene(EPS) – Specification.EN 13164, Thermal insulation products for buildings – Factory made products of extruded polystyrene foam(XPS) – Specification.EN 13165, Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products– Specification.EN 13166, Thermal insulation products for buildings – Factory made products of phenolic foam (PF) –Specification.EN 13167, Thermal insulation products for buildings – Factory made cellular glass (CG) products –Specification.EN 13168, Thermal insulation products for buildings – Factory made wood wool (WW) products –Specification.EN 13169, Thermal insulation products for buildings – Factory made products of expanded perlite (EPB) –Specification.EN 13170, Thermal insulation products for buildings – Factory made products of expanded cork (ICB) –Specification.
Page 4EN 13166:2001EN 13171, Thermal insulation products for buildings – Factory made wood fibre (WF) products –Specification.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.1ScopeThis European Standard specifies the requirements for factory made products of phenolic foam, with orwithout facings, which are used for the thermal insulation of buildings. The products are manufactured in theform of boards and laminates.This standard describes product characteristics and includes procedures for testing, evaluation of conformity,marking and labelling.Products covered by this standard are also used in prefabricated thermal insulation systems and compositepanels; the performance of systems incorporating these products is not covered.This standard does not specify the required level of a given property to be achieved by a product todemonstrate fitness for purpose in a particular application. The levels required for a given application are tobe found in regulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,40 m2·K/W or a declared thermal conductivitygreater than 0,050 W/(m·K) at 10 °C are not covered by this standard.This standard does not cover in-situ insulation products, products intended to be used for the insulation ofbuilding equipment and industrial installations or products intended for acoustic insulation.2Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text, and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications applyto this European Standard only when incorporated in it by amendment or revision. For undated referencesthe latest edition of the publication referred to applies (including amendments).EN 822, Thermal insulating products for building applications – Determination of length and width.EN 823, Thermal insulating products for building applications – Determination of thickness.EN 824, Thermal insulating products for building applications – Determination of squareness.EN 825, Thermal insulating products for building applications – Determination of flatness.EN 826, Thermal insulating products for building applications – Determination of compression behaviour.EN 1602, Thermal insulating products for building applications – Determination of apparent density.EN 1603, Thermal insulating products for building applications – Determination of dimensional stability underconstant normal laboratory conditions (25 °C / 50 % relative humidity).EN 1604, Thermal insulating products for building applications – Determination of dimensional stability underspecified temperature and humidity conditions.EN 1606, Thermal insulating products for building applications – Determination of compressive creep.
Page 5EN 13166:2001EN 1607, Thermal insulating products for building applications – Determination of tensile strengthperpendicular to faces.EN 1609, Thermal insulating products for building applications – Determination of short term waterabsorption by partial immersion.EN ISO 4590, Cellular plastics – Determination of volume percentage of open and closed cells of rigidmaterials (ISO 4590:1981).prEN ISO 9229, Thermal insulation – Definitions of terms (ISO/DIS 9229:1997).prEN ISO 11925-2, Reaction to fire tests for building products – Part 2: Ignitability when subjected to directimpingement of flame (ISO/DIS 11925-2:1998).EN 12086:1997, Thermal insulating products for building applications – Determination of water vapourtransmission properties.EN 12087, Thermal insulating products for building applications – Determination of long term waterabsorption by immersion.EN 12089:1997, Thermal insulating products for building applications – Determination of bending behaviour.EN 12429, Thermal insulating products for building applications – Conditioning to moisture equilibrium underspecified temperature and humidity conditions.prEN 12667, Thermal performance for building materials and products – Determination of thermal resistanceby means of guarded hot plate and heat flow meter methods – Products of high and medium thermalresistance.EN 12939, Thermal performance for building materials and products – Determination of thermal resistanceby means of guarded hot plate and heat flow meter methods – Thick products of high and medium thermalresistance.EN 13172:2001, Thermal insulating products – Evaluation of conformity.prEN 13501-1, Fire classification of construction products and building elements – Part 1 : Classificationusing test data from reaction to fire test.prEN 13823, Reaction to fire tests for building products – Building products excluding floorings exposed tothe thermal attack by a single burning item.ISO 12491, Statistical methods for quality control of building materials and components.3Terms, definitions, symbols, units and abbreviated terms3.1Terms and definitionsFor the purposes of this standard, the following terms and definitions apply.3.1.1Terms and definitions as given in prEN ISO 92293.1.1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.