SIST EN 1603:2013
(Main)Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)
This European Standard specifies the equipment and procedures to evaluate irreversible dimensional changes of test specimens and full size products with time under constant normal laboratory conditions. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität im Normalklima (23°C/50% relative Luftfeuchte)
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung irreversibler Dimensions-änderungen von Probekörpern und Produkten in Liefermaßen in Abhängigkeit von der Zeit bei Normalklima fest. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de laboratoire constantes et normales (23°C/50% d'humidité relative)
La présente Norme européenne spécifie l'équipement et les modes opératoires permettant d'évaluer les
modifications irréversibles des dimensions des éprouvettes et des produits en vraies dimensions, avec le
temps, dans des conditions de laboratoire normales et constantes. Elle s’applique aux produits isolants
thermiques.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri konstantnih laboratorijskih pogojih (23 °C/50-odstotna relativna vlažnost zraka)
Ta evropski standard določa opremo in postopke za ocenjevanje postopnih nepovratnih dimenzijskih sprememb testnih vzorcev in izdelkov v naravni velikosti pri nespremenljivih normalnih laboratorijskih pogojih. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri konstantnih laboratorijskih pogojih (23 °C/50-odstotna relativna vlažnost zraka)Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität im Normalklima (23°C/50% relative Luftfeuchte)Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de laboratoire constantes et normales (23°C/50% d'humidité relative)Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 1603:2013SIST EN 1603:2013en,fr,de01-julij-2013SIST EN 1603:2013SLOVENSKI
STANDARDSIST EN 1603:1997/AC:1999SIST EN 1603:1997/A1:2007SIST EN 1603:19971DGRPHãþD
SIST EN 1603:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1603
March 2013 ICS 91.100.60 Supersedes EN 1603:1996English Version
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de laboratoire constantes et normales (23°C/50% d'humidité relative)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität im Normalklima (23°C/50% relative Luftfeuchte) This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1603:2013: ESIST EN 1603:2013
EN 1603:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle. 6 5 Apparatus . 6 6 Test specimens . 6 6.1 Dimensions of test specimens . 6 6.2 Number of test specimens . 6 6.3 Preparation of test specimens . 8 6.4 Conditioning of test specimens. 8 7 Procedure . 8 7.1 Test conditions . 8 7.2 Test procedure . 8 8 Calculation and expression of results . 9 9 Accuracy of measurement . 10 10 Test report . 10
SIST EN 1603:2013
EN 1603:2013 (E) 3 Foreword This document (EN 1603:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1603:1996.
The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. lt supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building, but it may also be used in other areas where it is relevant. This European test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep SIST EN 1603:2013
EN 1603:2013 (E) 4 EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications — Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications — Determination of bending behaviour EN 12090, Thermal insulating products for building applications — Determination of shear behaviour EN 12091, Thermal insulating products for building applications — Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applic
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Preskus dimenzijske stabilnosti pri konstantnih laboratorijskih pogojih (23 °C / 50-odstotna relativna vlažnost zraka)Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität im Normalklima (23°C/50% relative Luftfeuchte)Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de laboratoire constantes et normales (23°C/50% d'humidité relative)Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 1603kSIST FprEN 1603:2012en,fr,de01-september-2012kSIST FprEN 1603:2012SLOVENSKI
STANDARD
kSIST FprEN 1603:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1603
June 2012 ICS 91.100.60 Will supersede EN 1603:1996English Version
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la stabilité dimensionnelle dans des conditions de laboratoire constantes et normales (23°C/50% d'humidité relative)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Dimensionsstabilität im Normalklima (23°C/50% relative Luftfeuchte) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1603:2012: EkSIST FprEN 1603:2012
FprEN 1603:2012 (E) 2 Contents Page Foreword .31 Scope .52 Normative references .53 Terms and definitions .54 Principle .65 Apparatus .66 Test specimens .66.1 Dimensions of test specimens .66.2 Number of test specimens .66.3 Preparation of test specimens .86.4 Conditioning of test specimens .87 Procedure .87.1 Test conditions .87.2 Test procedure .88 Calculation and expression of results .99 Accuracy of measurement . 1010 Test report . 10 kSIST FprEN 1603:2012
FprEN 1603:2012 (E) 3 Foreword This document (FprEN 1603:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1603:1996.
The revision of this standard contains no major changes only minor corrections and clarifications of editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. lt supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in building, but it may also be used in other areas where it is relevant. This EN test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces kSIST FprEN 1603:2012
FprEN 1603:2012 (E) 4 EN 1609, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long-term water absorption by immersion
EN 12088, Thermal insulating products for building applications — Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications —Determination of bending behaviour EN 12090, Thermal insulating products for building applications — De
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.