SIST EN 61249-4-19:2014

Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Hich performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly

This part of IEC 61249 gives requirements for properties of prepreg that is mainly intended to be used as bonding sheets in connection with laminates according to IEC 61249-2-40 when manufacturing multilayer boards according to IEC 62326-4. Multilayer boards comprised of these materials are suitable for lead-free assembly processes. This material may be also used to bond other types of laminates. Prepreg according to this standard is of defined flammability (vertical burning test). The flammability rating on fully cured prepreg is achieved through the use of non-halogenated fire retardants contained as an integral part of the polymeric structure. After curing of the prepreg according to the supplier’s instructions, the glass transition temperature is defined to be 170 °C minimum.

Materialen für Leiterplatten und andere Verbindungsstrukturen - Teil 4-19: Rahmenspezifikation für unkaschierte Prepreg-Materialien (zur Herstellung von Mehrlagenleiterplatten) - Hochwertige mit E-Glasgewebe verstärkte Prepregs auf der Basis von halogenfreiem Epoxidharz mit definierter Brennbarkeit (Brennprüfung mit vertikaler Prüflingslage) für bleifreie Bestückungstechnik

Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-19: Série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués (pour la fabrication des cartes multicouches) - Tissu de verre époxyde préimprégné non halogéné de type E à haute performance, d'inflammabilité définie (essai de combustion verticale) pour les assemblages sans plomb

La CEI 61249-4-19:2013 fournit des exigences concernant les propriétés des préimprégnés principalement prévus pour être utilisés en tant que feuilles de collage en relation avec des stratifiés selon la CEI 61249-2-40 lors de la fabrication des cartes multicouches selon la CEI 62326-4. Les cartes multicouches constituées de ces matériaux conviennent pour des processus d'assemblage sans plomb. Ce matériau peut également être utilisé pour coller d'autres types de stratifiés. Un préimprégné selon la présente norme est d'une inflammabilité définie (essai de combustion verticale). L'inflammabilité nominale d'un préimprégné entièrement traité est obtenue en utilisant des retardateurs de flamme non halogénés faisant partie intégrante de la structure polymère. Après traitement du préimprégné selon les instructions du fabricant, la température de transition vitreuse est définie comme étant au minimum de 170 °C minimum.

Materiali za plošče tiskanih vezij in druge povezovalne strukture - 4-19. del: Nabor področnih specifikacij za predimpregnirane (prepreg) materiale, neprevlečene (za izdelavo večplastnih plošč) - Zelo zmogljive nehalogene epoksidne predimpregnirane plošče iz E-steklene teksture z določeno vnetljivostjo (preskus z vertikalnim ognjem) za sestave brez svinca (IEC 61249-4-19:2013)

General Information

• Status: Published
• Publication Date: 23-Jan-2014
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: ITIV - Electronics assembly technology and Environmental standardization
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jan-2014
• Due Date: 20-Mar-2014
• Completion Date: 24-Jan-2014
• Ref Project: EN 61249-4-19:2013 - Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61249-4-19:2014
01-marec-2014
0DWHULDOL]DSORãþHWLVNDQLKYH]LMLQGUXJHSRYH]RYDOQHVWUXNWXUHGHO1DERU
SRGURþQLKVSHFLILNDFLM]DSUHGLPSUHJQLUDQHSUHSUHJPDWHULDOHQHSUHYOHþHQH]D
L]GHODYRYHþSODVWQLKSORãþ=HOR]PRJOMLYHQHKDORJHQHHSRNVLGQH
SUHGLPSUHJQLUDQHSORãþHL](VWHNOHQHWHNVWXUH]GRORþHQRYQHWOMLYRVWMRSUHVNXV]
YHUWLNDOQLPRJQMHP]DVHVWDYHEUH]VYLQFD,(&
Materials for printed boards and other interconnecting structures - Part 4-19: Sectional
specification set for prepreg materials, unclad (for the manufacture of multilayer boards) -
Hich performance non-halogenated epoxide woven E-glass prepreg of defined
flammability (vertical burning test) for lead-free assembly
Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-19:
Série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués (pour
la fabrication des cartes multicouches) - Tissu de verre époxyde préimprégné non
halogéné de type E à haute performance, d'inflammabilité définie (essai de combustion
verticale) pour les assemblages sans plomb
Ta slovenski standard je istoveten z: EN 61249-4-19:2013
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
SIST EN 61249-4-19:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61249-4-19:2014

---------------------- Page: 2 ----------------------

SIST EN 61249-4-19:2014

EUROPEAN STANDARD
EN 61249-4-19

NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM


ICS 31.180

English version

Materials for printed boards and other interconnecting structures -
Part 4-19: Sectional specification set for prepreg materials, unclad (for the
manufacture of multilayer boards) -
Hich performance non-halogenated epoxide woven E-glass prepreg of
defined flammability (vertical burning test) for lead-free assembly
(IEC 61249-4-19:2013)

Matériaux pour circuits imprimés et autres Materialen für Leiterplatten und andere
structures d'interconnexion - Verbindungsstrukturen -
Partie 4-19: Série de spécifications Teil 4-19: Rahmenspezifikation für
intermédiaires pour matériaux unkaschierte Prepreg-Materialien (zur
préimprégnés, non plaqués (pour la Herstellung von Mehrlagenleiterplatten) -
fabrication des cartes multicouches) - Hochwertige mit E-Glasgewebe verstärkte
Tissu de verre époxyde préimprégné non Prepregs auf der Basis von halogenfreiem
halogéné de type E à haute performance, Epoxidharz mit definierter Brennbarkeit
d'inflammabilité définie (essai de (Brennprüfung mit vertikaler Prüflingslage)
combustion verticale), pour les für bleifreie Bestückungstechnik
assemblages sans plomb (IEC 61249-4-19:2013)
(CEI 61249-4-19:2013)

This European Standard was approved by CENELEC on 2013-12-09. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61249-4-19:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61249-4-19:2014
EN 61249-4-19:2013 - 2 -
Foreword
The text of document 91/1126/FDIS, future edition 1 of IEC 61249-4-19, prepared by IEC TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61249-4-19:2013.

The following dates are fixed:
(dop) 2014-09-09
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-12-09
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61249-4-19:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60194:2006 NOTE  Harmonized as EN 60194:2006 (not modified).
IEC 62326-4 NOTE  Harmonized as EN 62326-4.

---------------------- Page: 4 ----------------------

SIST EN 61249-4-19:2014
- 3 - EN 61249-4-19:2013
Annex ZA
(normative)
Normative references to i nternational publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61189-2 2006 Test methods for electrical materials, printed EN 61189-2 2006
boards and other interconnection structures
and assemblies -
Part 2: Test methods for materials for
interconnection structures


IEC 61249-2-40 - Materials for printed boards and other EN 61249-2-40 -
interconnecting structures -
Part 2-40: Reinforced base materials clad and
unclad - High performance, non-halogenated
epoxide woven E-glass laminate sheets of
defined flammability (vertical burning test),
copper-clad for lead-free assembly


IEC/PAS 61249-6-3 2011 Specification for finished fabric woven from - -
"E" glass for printed boards


ISO 9000 2005 Quality management systems - Fundamentals EN ISO 9000 2005
and vocabulary


ISO 11014 2009 Safety data sheet for chemical products - - -
Content and order of sections


ISO 14001 2004 Environmental management systems - EN ISO 14001 2004
Requirements with guidance for use

---------------------- Page: 5 ----------------------

SIST EN 61249-4-19:2014

---------------------- Page: 6 ----------------------

SIST EN 61249-4-19:2014



IEC 61249-4-19

®


Edition 1.0 2013-11




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Materials for printed boards and other interconnecting structures –

Part 4-19: Sectional specification set for prepreg materials, unclad (for the

manufacture of multilayer boards) – High performance non-halogenated epoxide


woven E-glass prepreg of defined flammability (vertical burning test) for lead-

free assembly




Matériaux pour circuits imprimés et autres structures d'interconnexion –

Partie 4-19: Série de spécifications intermédiaires pour matériaux préimprégnés,

non plaqués (pour la fabrication des cartes multicouches) – Tissu de verre

époxyde préimprégné non halogéné de type E à haute performance,

d'inflammabilité définie (essai de combustion verticale), pour les assemblages

sans plomb






INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX N


ICS 31.180 ISBN 978-2-8322-1167-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61249-4-19:2014
– 2 – 61249-4-19 © IEC:2013
CONTENTS

FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Materials and construction . 6
3.1 General . 6
3.2 Reinforcement . 7
3.3 Resin system . 7
4 Properties . 7
4.1 Properties related to the appearance of the prepreg. 7
4.1.1 General . 7
4.1.2 Dewetted areas (fish eyes) . 7
4.1.3 Broken filaments . 7
4.1.4 Distortion . 7
4.1.5 Creases . 7
4.1.6 Edge conditions . 8
4.2 Properties related to B-stage prepreg . 8
4.2.1 General . 8
4.2.2 Resin content . 8
4.2.3 Treated weight . 8
4.2.4 Resin flow . 9
4.2.5 Scaled flow thickness . 9
4.2.6 Melting viscosity . 9
4.2.7 Gel time . 9
4.2.8 Volatile content . 9
4.3 Properties related to prepreg after curing . 9
4.3.1 Electric strength. 9
4.3.2 Flammability . 9
4.3.3 Relative permittivity and dissipation factor . 10
4.3.4 Cured thickness . 10
4.3.5 Glass transition temperature (T ) . 10
g
4.3.6 Decomposition temperature (T ) . 10
d
4.3.7 Time to delamination . 10
4.3.8 Z-axis expansion . 11
5 Delivery form . 11
5.1 General . 11
5.2 Rolls . 11
5.3 Sheets . 11
5.4 Cut panels . 11
6 Quality assurance . 11
6.1 Quality system . 11
6.2 Responsibility for inspection. 12
6.3 Qualification inspection . 12
6.4 Quality conformance inspection . 12
6.5 Certificate of conformance . 12
6.6 Safety data sheet . 12

---------------------- Page: 8 ----------------------

SIST EN 61249-4-19:2014
61249-4-19 © IEC:2013 – 3 –
7 Packaging and marking . 12
8 Shelf life . 13
9 Ordering information . 13
Bibliography . 14

Table 1 – Flammability, vertical burning test . 10
Table 2 – Decomposition temperature requirements . 10
Table 3 – Time to delamination requirements . 11
Table 4 – Z-axis expansion requirements . 11

---------------------- Page: 9 ----------------------

SIST EN 61249-4-19:2014
– 4 – 61249-4-19 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MATERIALS FOR PRINTED BOARDS
AND OTHER INTERCONNECTING STRUCTURES –

Part 4-19: Sectional specification set for prepreg materials,
unclad (for the manufacture of multilayer boards) –
High performance non-halogenated epoxide woven E-glass prepreg
of defined flammability (vertical burning test) for lead-free assembly

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to th
...