SIST EN 15625:2009/kprA1:2010

Railway applications - Braking - Automatic variable load sensing devices

This European Standard applies to automatic variable load sensing devices designed to continuously sense the load of a railway vehicle and provide a signal that can be used by a relay valve for the automatic variation of the air pressure used for brake application, thereby adjusting the brake force accordingly to achieve the required brake performance.
This European Standard specifies the requirements for the design, dimensions, manufacture and testing of automatic variable load sensing devices.

Bahnanwendungen - Bremse - Automatisch kontinuierlich wirkende Lasterfassungseinrichtungen

Applications ferroviaires - Freinage - Dispositifs de pesée variable automatiques

Železniške naprave - Zavore - Naprave za samodejno zaznavanje spremembe obtežbe

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Sep-2010
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 28-Jan-2014
• Due Date: 02-Feb-2014
• Completion Date: 28-Jan-2014
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Ref Project: EN 15625:2008/FprA1 - Railway applications - Braking - Automatic variable load sensing devices

Relations

• Revised: SIST EN 15625:2009 - Railway applications - Braking - Automatic variable load sensing devices
• Effective Date: 12-Dec-2009
• Consolidated By: SIST EN 15625:2009+A1:2011 - Railway applications - Braking - Automatic variable load sensing devices
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 15625:2009+A1:2011 - Railway applications - Braking - Automatic variable load sensing devices
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 15625:2009+A1:2011 - Railway applications - Braking - Automatic variable load sensing devices
• Effective Date: 01-Apr-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15625:2009/kprA1:2010
01-september-2010
Železniške naprave - Zavore - Naprave za samodejno zaznavanje spremembe
obtežbe
Railway applications - Braking - Automatic variable load sensing devices
Bahnanwendungen - Bremse - Automatisch kontinuierlich wirkende
Lasterfassungseinrichtungen
Applications ferroviaires - Freinage - Dispositifs de pesée variable automatiques
Ta slovenski standard je istoveten z: EN 15625:2008/FprA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 15625:2009/kprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 15625:2009/kprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 15625:2009/kprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 15625:2008
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
April 2010
ICS 45.060.01
English Version
Railway applications - Braking - Automatic variable load sensing
devices
Applications ferroviaires - Freinage - Dispositifs de pesée Bahnanwendungen - Bremse - Automatisch kontinuierlich
variable automatiques wirkende Lasterfassungseinrichtungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 15625:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15625:2008/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 15625:2009/kprA1:2010
EN 15625:2008/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modification to the Contents .4
2 Modification to the Foreword .4
3 Modification to Annex ZA, Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive 2008/57/EC of the European
Parliament and of the Council of 17 June 2008 on the interoperability of the rail system
within the Community (Recast) .5
4 Deletion of Annex ZB .9

2

---------------------- Page: 4 ----------------------

SIST EN 15625:2009/kprA1:2010
EN 15625:2008/FprA1:2010 (E)
Foreword
This document (EN 15625:2008/FprA1:2010) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
The “Recast” Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of
th
the rail system within the Community was published on 17 June 2008.

The two previous EU Directives 96/48/EC and 2001/16/EC on the interoperability of the High Speed and
th
Conventional rail systems within the Community will therefore be repealed with effect from 19 July 2010.

At this date the harmonised standards for the railway field will have to refer to the new Directive.

In order to fulfil this requirement, it has been decided to produce Amendments for the ENs that will not have
undergone the revision process by the date of the repeal.

This document gives the necessary elements that have been identified by the CEN Consultants for the
amendment of EN 15625:2008.
3

---------------------- Page: 5 ----------------------

SIST EN 15625:2009/kprA1:2010
EN 15625:2008/FprA1:2010 (E)

1 Modification to the Contents
Replace the entry for Annex ZA with the following:
"Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU
Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of
the rail system within the Community (Recast)"
Delete the entry for Annex ZB.

2 Modification to the Foreword
Replace paragraphs 4 and 5 with the following:
"This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supports essential requirements of EU Directive
2008/57/EC.
For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this
document."

3 Modification to Annex ZA
Replace Annex ZA with the following:
"
4

---------------------- Page: 6 ----------------------

SIST EN 15625:2009/kprA1:2010
EN 15625:2008/FprA1:2010 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 2008/57/EC of the European Parliament
and of the Council of 17 June
...