SIST EN 61605:2006
(Main)Fixed inductors for use in electronic and telecommunication equipment - Marking codes
Fixed inductors for use in electronic and telecommunication equipment - Marking codes
This International Standard specifies marking codes for fixed inductors. The colour code specified in Clause 3 gives a colour coding for fixed inductors. It is intended for use with the values of the E 3 to E 24 series as specified in IEC 60063. The code specified in Clause 4 gives a system for marking inductance values by means of digits and letters. The code specified in Clause 5 gives a system for marking the tolerance on inductance values by means of letters. The code specified in Clause 6 gives a system for marking of date codes on fixed inductors by means of letters and digits.
Festinduktivitäten für elektrische und nachrichtentechnische Einrichtungen - Kennzeichnungen
Inductances fixes utilisées dans les équipements électroniques et de télécommunications - Codes pour le marquage
Spécifie les codes de marquage applicables aux inductances fixes. Couvre les valeurs de l'inductance et leurs tolérances ainsi que les dates.
Fiksne dušilke za elektronsko in telekomunikacijsko opremo – Označevalne kode (IEC 61605:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61605:2006
STANDARD
januar 2006
Fiksne dušilke za elektronsko in telekomunikacijsko opremo – Označevalne
kode (IEC 61605:2005)
(istoveten EN 61605:2005)
Fixed inductors for use in electronic and telecommunication equipment - Marking
codes (IEC 61605:2005)
ICS 01.070; 29.180 Referenčna številka
SIST EN 61605:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61605
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2005
ICS 29.100.10 Supersedes EN 61605:1997
English version
Fixed inductors for use in electronic and
telecommunication equipment –
Marking codes
(IEC 61605:2005)
Inductances fixes utilisées Festinduktivitäten für elektrische und
dans les équipements électroniques nachrichtentechnische Einrichtungen -
et de télécommunications – Kennzeichnungen
Codes pour le marquage (IEC 61605:2005)
(CEI 61605:2005)
This European Standard was approved by CENELEC on 2005-07-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61605:2005 E
---------------------- Page: 2 ----------------------
EN 61605:2005 - 2 -
Foreword
The text of document 51/819/FDIS, future edition 2 of IEC 61605, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61605 on 2005-07-01.
This European Standard supersedes EN 61605:1997.
It includes the following significant technical changes:
a) some new letter codes for tolerances of inductance values have been added;
b) the date code system for fixed inductors has been updated.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61605:2005 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61605:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60063 - Preferred number series for resistors and - -
capacitors
ISO 8601 2004 Data elements and interchange formats - - -
Information interchange - Representation
of dates and times
1)
Undated reference.
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE
IEC
61605
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2005-06
Inductances fixes utilisées dans les équipements
électroniques et de télécommunications –
Codes pour le marquage
Fixed inductors for use in electronic
and telecommunication equipment –
Marking codes
IEC 2005 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
K
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
61605 IEC:2005 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIXED INDUCTORS FOR USE IN ELECTRONIC
AND TELECOMMUNICATION EQUIPMENT –
MARKING CODES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 6160
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.