SIST EN ISO 16906:2025
(Main)Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
This International Standard specifies a method for determining the strength of the seams of resilient
floor coverings when welded in accordance with the manufacturer’s instructions.
Elastische Bodenbeläge - Bestimmung der Nahtfestigkeit (ISO 16906:2015)
Revêtements de sol résilients - Détermination de la résistance de la soudure (ISO 16906:2015)
La présente Norme internationale spécifie une méthode pour déterminer la résistance des soudures des revêtements de sol résilients lorsqu’ils sont soudés conformément aux instructions du fabricant.
Netekstilne talne obloge - Ugotavljanje trdnosti šiva (ISO 16906:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Netekstilne talne obloge - Ugotavljanje trdnosti šiva (ISO 16906:2015)
Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
Elastische Bodenbeläge - Bestimmung der Nahtfestigkeit (ISO 16906:2015)
Revêtements de sol résilients - Détermination de la résistance de la soudure (ISO
16906:2015)
Ta slovenski standard je istoveten z: EN ISO 16906:2024
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 16906
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 684:1995
English Version
Resilient floor coverings - Determination of seam strength
(ISO 16906:2015)
Revêtements de sol résilients - Détermination de la Elastische Bodenbeläge - Bestimmung der
résistance des soudures (ISO 16906:2015) Nahtfestigkeit (ISO 16906:2015)
This European Standard was approved by CEN on 27 October 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16906:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 16906:2015 has been prepared by Technical Committee ISO/TC 219 "Floor coverings" of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 16906:2024
by Technical Committee CEN/TC 134 “Resilient, textile, laminate and modular mechanical locked floor
coverings” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2025, and conflicting national standards shall be
withdrawn at the latest by April 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 684:1995.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 16906:2015 has been approved by CEN as EN ISO 16906:2024 without any modification.
INTERNATIONAL ISO
STANDARD 16906
First edition
2015-05-15
Resilient floor coverings —
Determination of seam strength
Revêtements de sol résilients — Détermination de la résistance de la
soudure
Reference number
ISO 16906:2015(E)
©
ISO 2015
ISO 16906:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 16906:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Terms and definitions . 1
3 Principle . 1
4 Apparatus . 1
5 Sampling and preparation of test pieces .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.