SIST EN ISO 14451-10:2013

Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO 14451-10:2013)

ISO 14451-10:2013 specifies the types and order of tests to be applied to the semi finished products and sets out the acceptance criteria and means of categorization.
ISO 14451-10:2013 applies to type tests.
ISO 14451-10:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 10: Anforderungen und Kategorisierung von Halbfertigerzeugnissen (ISO 14451-10:2013)

Die vorliegende Norm legt die Arten und die Reihenfolge der anzuwendenden Prüfverfahren für Halbfertigerzeugnisse (Halbzeuge/Zwischenprodukte) fest und legt die entsprechenden Bewertungskriterien fest.

Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 10: Exigences relatives aux produits semi-finis et leur classement en catégories (ISO 14451-10:2013)

L'ISO 14451-10:2013 spécifie les types et l'ordre des essais à réaliser sur les produits semi-finis et établit les critères d'acceptation correspondants et les règles de classement en catégories.
Elle est applicable aux essais de type.
Elle n'est pas applicable aux articles contenant des explosifs militaires ou des substances explosives commerciales, à l'exception de la poudre noire ou de la composition lumineuse.

Pirotehnični izdelki - Pirotehnični izdelki za vozila - 10. del: Zahteve in kategorizacija za polizdelke (ISO 14451-10:2013)

Ta del standarda ISO 14451 določa vrste in zaporedje preskusov za uporabo pri polizdelkih ter navaja merila sprejemljivosti in načine kategorizacije. Ta del standarda ISO 14451 se uporablja za tipske preskuse. Ta del standarda ISO 14451 se ne uporablja za izdelke, ki vsebujejo vojaški eksploziv ali tržne eksplozivne sestavine, razen črnega smodnika ali bliskovnega praška.

General Information

• Status: Published
• Public Enquiry End Date: 24-Jun-2011
• Publication Date: 05-Jun-2013
• ICS: 43.040.99 - Other road vehicle systems
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-May-2013
• Due Date: 28-Jul-2013
• Completion Date: 06-Jun-2013
• Directive: 2007/23/EC - Directive 2007/23/EC of the European Parliament and of the Council of 23 May 2007 on the placing on the market of pyrotechnic articles
• Directive: 2013/29/EU - Directive 2013/29/EU of the European Parliament and of the Council of 12 June 2013 on the harmonisation of the laws of the Member States relating to the making available on the market of pyrotechnic articles (recast)
• Mandate: M/416 - Standardization mandate assigned to CEN concerning pyrotechnic articles
• Ref Project: EN ISO 14451-10:2013 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO 14451-10:2013)

Overview

SIST EN ISO 14451-10:2013 is an internationally recognized standard developed by the European Committee for Standardization (CEN) and the International Organization for Standardization (ISO). This standard specifies requirements and categorization for semi-finished pyrotechnic products used in vehicles. It provides clear guidelines on the types and sequence of tests applicable to these semi-finished pyrotechnic articles, alongside acceptance criteria for quality and safety evaluation. The scope of this standard is limited to type tests and explicitly excludes articles containing military explosives or commercial blasting agents, except for black powder or flash compositions.

Key Topics

• Test Methods and Procedures: EN ISO 14451-10 delineates the mandatory tests that semi-finished pyrotechnic products must undergo. It ensures rigorous verification of design and documentation to guarantee safety and operational reliability within automotive safety systems.
• Acceptance Criteria: The standard sets out specific acceptance thresholds that the products need to meet before approval. This ensures consistent quality control and performance reliability.
• Categorization of Semi-Finished Products: Products are classified into two categories based on hazard levels:
  • Category P1: Semi-finished products presenting a low hazard level, suitable for general handling.
  • Category P2: Products requiring handling by personnel with specialist knowledge due to higher associated risks.
• Documentation Requirements: Emphasizes comprehensive and complete documentation in accordance with ISO 14451-2:2013, facilitating transparency and traceability throughout the product lifecycle.
• Compliance with EC Directive 2007/23/EC: EN ISO 14451-10 aligns with essential safety requirements under the European Directive regulating pyrotechnic articles, ensuring its applicability within the European market.

Applications

The application of SIST EN ISO 14451-10:2013 centers on the automotive industry, particularly in the design, manufacture, and quality assurance of vehicle safety pyrotechnic components such as gas generators, airbags, pretensioners, and related assemblies. Key practical benefits include:

• Enhanced Safety in Vehicles: By standardizing pyrotechnic components, this standard contributes to reliable deployment of passive safety systems during accidents.
• Quality Assurance in Manufacturing: Manufacturers use this standard to implement consistent testing and quality categorization, improving overall product reliability.
• Regulatory Compliance: Adoption of this standard helps businesses comply with European regulatory requirements, smoothing market access across CEN member countries.
• Risk Management: Classification into hazard categories (P1 and P2) aids industries in instituting appropriate risk handling procedures, reducing incidents caused by improper handling or misuse.

Related Standards

SIST EN ISO 14451-10:2013 forms part of the broader ISO 14451 series dedicated to pyrotechnic articles for vehicles. Relevant related parts include:

• ISO 14451-1: Terminology for pyrotechnic articles in automotive applications.
• ISO 14451-2: Test methods for pyrotechnic articles.
• ISO 14451-3: Labelling requirements for pyrotechnic articles.
• ISO 14451-4 to ISO 14451-9: Specifications covering requirements and categorization of specific pyrotechnic components, such as gas generators, airbags, seatbelt pretensioners, igniters, and actuators.

Together, these interconnected standards provide a comprehensive framework for development, testing, classification, and regulatory adherence of pyrotechnic safety components essential for the automotive sector.

---

Keywords: SIST EN ISO 14451-10:2013, pyrotechnic articles for vehicles, semi-finished pyrotechnic products, vehicle safety, pyrotechnic testing, safety categorization, automotive pyrotechnics standard, European pyrotechnic regulations, passive safety systems, ISO 14451 series.

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2013
3LURWHKQLþQLL]GHONL3LURWHKQLþQLL]GHONL]DYR]LODGHO=DKWHYHLQ
NDWHJRUL]DFLMD]DSROL]GHONH,62
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and
categorization for semi-finished products (ISO 14451-10:2013)
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 10:
Anforderungen und Kategorisierung von Halbfertigerzeugnissen (ISO 14451-10:2013)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 10: Exigences
relatives aux produits semi-finis et leur classement en catégories (ISO 14451-10:2013)
Ta slovenski standard je istoveten z: EN ISO 14451-10:2013
ICS:
43.040.99 Drugi sistemi za cestna Other road vehicle systems
vozila
71.100.30 Eksplozivi. Pirotehnika Explosives. Pyrotechnics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14451-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 43.040.80
English Version
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10:
Requirements and categorization for semi-finished products
(ISO 14451-10:2013)
Articles pyrotechniques - Articles pyrotechniques pour Pyrotechnische Gegenstände - Pyrotechnische
véhicules - Partie 10: Exigences relatives aux produits Gegenstände für Fahrzeuge - Teil 10: Anforderungen und
semi-finis et leur classement en catégories (ISO 14451- Kategorisierung von Halbfertigerzeugnissen (ISO 14451-
10:2013) 10:2013)
This European Standard was approved by CEN on 9 February 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14451-10:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2007/23/EC on the placing on the market of pyrotechnic
articles .4

Foreword
This document (EN ISO 14451-10:2013) has been prepared by Technical Committee CEN/TC 212
“Pyrotechnic articles” the secretariat of which is held by NEN, in collaboration with Technical Committee
ISO/TC 22 "Road vehicles".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14451-10:2013 has been approved by CEN as EN ISO 14451-10:2013 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EC Directive 2007/23/EC on the placing on the market
of pyrotechnic articles
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2007/23/EC on the
placing on the market of pyrotechnic articles (1 of 2)
Clause(s)/sub-clause(s) of Essential Safety Requirements
Qualifying remarks/Notes
this document (ESRs) of Directive 2007/23/EC
Note: It is taken into account that the
intended purpose of the pyrotechnic
4.2 (1)
article is to function in a vehicle in case
of accidents
(2) See ISO 14451-2
4.2 (3) 1st sentence
Note: It is taken into account that the
intended purpose of the pyrotechnic
4.2 (3) 2nd and 3rd sentences
article is to function in a vehicle in case
of accidents
(3a) See ISO 14451-2
4.2 (3b)
4.2 (3c)
4.2 (3d)
4.2 (3e)
4.2 (3f)
4.2 (3g)
(3h) See ISO 14451-3
4.2 (3i)
(3j) See ISO 14451-2
4.2 (3) Last sentence
1 (4a)
1 (4b)
Table ZA.1 — (2 of 2)
Clause(s)/sub-clause(s) of Essential Safety Requirements
Qualifying remarks/Notes
this document (ESRs) of Directive 2007/23/EC
4.2, 5 (5 B.1)
See ISO 14451-2
(5 B.2)
and ISO 14451-3
4.2 (5 B.3)
(5 B.4) Not applicable
(5 C.1) to (5 C.5) Not applicable
4.2 (5 C.6) If applicable
(5 C.7) Not applicable
WARNING — Other requirements and other EU Directives may be applicable to
...