SIST EN ISO 536:2012
(Main)Paper and board - Determination of grammage (ISO 536:2012)
Paper and board - Determination of grammage (ISO 536:2012)
This International Standard specifies a method for determining the grammage of paper and board.
Papier und Pappe - Bestimmung der flächenbezogenen Masse (ISO 536:2012)
Diese Internationale Norm legt die allgemeinen Anforderungen und physikalischen Prüfungen für
feuerwiderstandsfähige Schläuche fest, die als Benzin- und Dieselleitungen eingesetzt werden. Dabei sind
Schläuche mit Innendurchmesser bis einschließlich 10 mm für Betriebsüberdrücke bis maximal 0,34 MPa
ausgelegt und Schläuche mit größerem Innendurchmesser für Betriebsüberdrücke bis maximal 0,25 MPa für
Wasserfahrzeuge mit einer Rumpflänge bis 24 m.
Sie gilt für Schläuche auf kleinen Wasserfahrzeugen mit fest eingebauten Kraftstoffsystemen. Sie gilt nicht für
Schläuche innerhalb des Spritzschutzes am Heck des Fahrzeugs, die direkt mit einem Außenbordmotor
verbunden sind.
Festlegungen für nicht feuerwiderstandfähige Kraftstoffschläuche sind in ISO 84691) enthalten. Festlegungen
für fest eingebaute Kraftstoffsysteme sind in ISO 10088 enthalten.
Papier et carton - Détermination du grammage (ISO 536:2012)
L'ISO 536:2012 spécifie une méthode de détermination du grammage du papier et du carton.
Papir, karton in lepenka - Ugotavljanje gramature (ISO 536:2012)
Ta mednarodni standard določa metodo za ugotavljanje gramature papirja, kartona in lepenke.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 536:2012
01-oktober-2012
1DGRPHãþD
SIST EN ISO 536:2000
Papir, karton in lepenka - Ugotavljanje gramature (ISO 536:2012)
Paper and board - Determination of grammage (ISO 536:2012)
Papier und Pappe - Bestimmung der flächenbezogenen Masse (ISO 536:2012)
Papier et carton - Détermination du grammage (ISO 536:2012)
Ta slovenski standard je istoveten z: EN ISO 536:2012
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 536:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 536:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 536:2012
EUROPEAN STANDARD
EN ISO 536
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 85.060 Supersedes EN ISO 536:1996
English Version
Paper and board - Determination of grammage (ISO 536:2012)
Papier et carton - Détermination du grammage (ISO Papier und Pappe - Bestimmung der flächenbezogenen
536:2012) Masse (ISO 536:2012)
This European Standard was approved by CEN on 14 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 536:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 536:2012
EN ISO 536:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 536:2012
EN ISO 536:2012 (E)
Foreword
This document (EN ISO 536:2012) has been prepared by Technical Committee ISO/TC 6 "Paper, board and
pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 536:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 536:2012 has been approved by CEN as a EN ISO 536:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 536:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 536:2012
INTERNATIONAL ISO
STANDARD 536
Third edition
2012-07-15
Paper and board — Determination of
grammage
Papier et carton — Détermination du grammage
Reference number
ISO 536:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 536:2012
ISO 536:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 536:2012
ISO 536:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sampling . 2
7 Conditioning . 2
8 Procedure . 2
9 Calculation and expression of results . 2
10 Test report . 3
Annex A (normative) Determination of grammage on an “oven-dry” and “as-taken” basis . 4
Annex B (informative) Precision . 5
Bibliography . 6
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 536:2012
ISO 536:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 536 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps, Subcommittee SC 2, Test
methods and quality specifications for paper and board.
This third edition cancels and replaces the second edition (ISO 536:1995), of which it constitutes a minor revision.
Mainly editorial changes have been made and precision data have been added as an informative Annex B.
iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 536:2012
INTERNATIONAL STANDARD ISO 536:2012(E)
Paper and board — Determination of grammage
1 Scope
This International Standard specifies a method for determining the grammage of paper and board.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amend
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.