SIST EN 15860:2018

Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods

This document specifies the requirements and associated test methods that apply to semi-finished products such as rods, hollow bars and plates made from thermoplastic materials. These semi-finished products are used predominantly for the manufacture of finished parts by means of machining.

Kunststoffe - Thermoplastische Halbzeuge für die spanende Verarbeitung - Anforderungen und Prüfmethoden

Diese Europäische Norm legt Anforderungen sowie Prüfverfahren für Halbzeuge wie Rund , Hohl- und Flach¬stäbe aus thermoplastischen Kunststoffen fest. Diese Halbzeuge werden vorzugsweise für die spanende Her¬stellung von Fertigteilen verwendet.

Matières plastiques - Produits semi-finis thermoplastiques pour usinage - Exigences et méthodes d'essai

Le présent document spécifie les exigences et méthodes d'essai associées qui s’appliquent à des produits semi-finis tels que des barres rondes, barres tubulaires et plaques en matières thermoplastiques. Ces produits semi-finis sont principalement utilisés pour la fabrication par usinage de pièces finies.

Polimerni materiali - Plastomerni polizdelki za nadaljnjo obdelavo - Zahteve in preskusne metode

Ta evropski standard določa zahteve in z njimi povezane preskusne metode, ki se uporabljajo za polizdelke, kot so drogi, votle palice in plošče, izdelani iz plastomernih materialov. Ti polizdelki se uporabljajo zlasti za proizvodnjo končnih delov na podlagi nadaljnje obdelave.

General Information

• Status: Published
• Public Enquiry End Date: 31-Jul-2016
• Publication Date: 04-Sep-2018
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Aug-2018
• Due Date: 08-Oct-2018
• Completion Date: 05-Sep-2018
• Ref Project: EN 15860:2018 - Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods

Relations

• Replaces: SIST EN 15860:2010 - Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
• Effective Date: 01-Aug-2018
• Revised: SIST EN 15860:2010 - Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
• Effective Date: 05-Nov-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polimerni materiali - Plastomerni polizdelki za nadaljnjo obdelavo - Zahteve in preskusne metodeKunststoffe - Thermoplastische Halbzeuge für die spanende Verarbeitung - Anforderungen und PrüfmethodenMatières plastiques - Produits semi-finis thermoplastiques pour usinage - Exigences et méthodes d'essaiPlastics - Thermoplastic semi-finished products for machining - Requirements and test methods83.080.20PlastomeriThermoplastic materialsICS:Ta slovenski standard je istoveten z:EN 15860:2018SIST EN 15860:2018en,fr,de01-oktober-2018SIST EN 15860:2018SLOVENSKI
STANDARDSIST EN 15860:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15860
July
t r s z ICS
z uä r z rä t r Supersedes EN
s w z x rã t r s rEnglish Version
Plastics æ Thermoplastic semiæfinished products for machining æ Requirements and test methods Matières plastiques æ Produits semiæfinis thermoplastiques pour usinage æ Exigences et méthodes d 5essai
Kunststoffe æ Thermoplastische Halbzeuge für die spanende Verarbeitung æ Anforderungen und Prüfmethoden This European Standard was approved by CEN on
t y March
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w z x rã t r s z ESIST EN 15860:2018

Determination of microporosity – Dye penetration method . 35 A.1 Test specimen preparation . 35 A.2 Test procedure . 35 A.3 Test results . 35 Annex B (normative)
Tables for the conversion of deflection values (straightness) . 37 Annex C (informative)
Examples of calculation of dimensional stability after heat treatment . 41 C.1 Rods . 41 C.2 Hollow bars . 41 C.3 Sheets . 42 Annex D (informative)
Some guideline values for material properties of thermoplastic semi-finished products . 44 Bibliography . 48
...