Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use - Methods for measuring the performance

IEC 62885-8:2019 is applicable for measurements of the performance of mains-operated dry vacuum cleaners, including water filter vacuum cleaners, for commercial use. The requirements for the construction and testing covered by this document are applied in addition to the requirements for commercial vacuum cleaners in IEC 60335-2-69. The purpose of this document is to specify essential performance characteristics of dry vacuum cleaners for commercial use that are of interest to operators and to describe methods for measuring these characteristics. Due to the influence of environmental conditions, variations in time, origin of test materials and proficiency of the operator, some of the described test methods will give more reliable results when applied for comparative testing of a number of appliances at the same time, in the same laboratory and by the same operator. The methods here can be applied with modifications for surface-cleaning product types or technologies not currently covered within the scope. For safety requirements, reference is made to IEC 60335-1 and IEC 60335-2-69. This first edition cancels and replaces IEC PAS 62611, published in 2009.

Geräte zur Oberflächenreinigung - Teil 8: Trockensauger für den gewerblichen Gebrauch - Verfahren zur Messung der Gebrauchseigenschaften

Appareils de nettoyage des sols - Partie 8: Aspirateurs à sec à usage commercial - Méthodes de mesure de l'aptitude à la fonction

L'IEC 62885-8:2019 s’applique aux mesures de l'aptitude à la fonction des aspirateurs à sec qui fonctionnent sur le réseau, y compris les aspirateurs à filtre à eau, à usage commercial. Les exigences relatives à la construction et aux essais couvertes par le présent document sont appliquées en complément des exigences applicables aux aspirateurs à usage commercial de l'IEC 60335-2-69. Le présent document a pour objet de spécifier les caractéristiques essentielles d'aptitude à la fonction des aspirateurs à sec à usage commercial présentant un intérêt pour les opérateurs et de décrire des méthodes de mesure de ces caractéristiques. En raison de l'influence des conditions environnementales, des variations dans le temps, de l'origine des matériaux d'essai et de l'aptitude de l'opérateur, certaines des méthodes d'essai décrites offrent des résultats plus fiables si elles sont appliquées lors d'essais comparatifs d'un certain nombre d'appareils à la fois, dans le même laboratoire et par le même opérateur. Les méthodes citées ici peuvent être appliquées avec des modifications pour des types de produits ou des technologies de nettoyage des sols qui ne sont actuellement pas couverts par le domaine d'application. Pour les exigences de sécurité, il est fait référence aux normes IEC 60335-1 et IEC 60335 2 69. Cette première édition annule et remplace l'IEC PAS 62611, parue en 2009.

Naprave za površinsko čiščenje - 8. del: Sesalniki za suho sesanje za komercialno uporabo - Metode za merjenje učinkovitosti

Ta dokument se uporablja za merjenje učinkovitosti električnih sesalnikov za suho sesanje za komercialno uporabo, vključno s sesalniki z vodnim filtrom. Zahteve za konstrukcijo in preskušanje, ki jih zajema ta dokument, se uporabljajo poleg zahtev za komercialne sesalnike iz standarda IEC 60335-2-69. Namen tega dokumenta je določiti glavne lastnosti delovanja sesalnikov za suho sesanje za komercialno uporabo, ki zanimajo upravljavce, ter opisati metode za merjenje teh lastnosti.

General Information

Status
Published
Publication Date
17-Oct-2019
Withdrawal Date
25-Sep-2022
Current Stage
6060 - Document made available - Publishing
Start Date
18-Oct-2019
Completion Date
18-Oct-2019

Buy Standard

Standard
EN IEC 62885-8:2019
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62885-8:2019
01-december-2019
Naprave za površinsko čiščenje - 8. del: Sesalniki za suho sesanje za komercialno
uporabo - Metode za merjenje učinkovitosti
Surface cleaning appliances - Part 8: Dry vacuum cleaners for commercial use -
Methods for measuring the performance
Ta slovenski standard je istoveten z: EN IEC 62885-8:2019
ICS:
97.080 Aparati za čiščenje Cleaning appliances
SIST EN IEC 62885-8:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62885-8:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 62885-8:2019


EUROPEAN STANDARD EN IEC 62885-8

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2019
ICS 97.080

English Version
Surface cleaning appliances - Part 8: Dry vacuum cleaners for
commercial use - Methods for measuring the performance
(IEC 62885-8:2019)
Appareils de nettoyage des sols - Partie 8: Aspirateurs à Geräte zur Oberflächenreinigung - Teil 8: Trockensauger für
sec à usage commercial - Méthodes de mesure de den gewerblichen Gebrauch - Prüfverfahren zur
l'aptitude à la fonction Bestimmung der Gebrauchseigenschaften
(IEC 62885-8:2019) (IEC 62885-8:2019)
This European Standard was approved by CENELEC on 2019-09-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62885-8:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62885-8:2019
EN IEC 62885-8:2019 (E)
European foreword
The text of document 59F/368/CDV, future edition 1 of IEC 62885-8, prepared by SC 59F "Surface
cleaning appliances" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62885-8:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-26
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62885-8:2019 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60335-1 NOTE Harmonized as EN 60335-1


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62885-8:2019
EN IEC 62885-8:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
This clause of EN 62885-2 is applicable with the following modifications: Delet
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.