SIST EN 303 372-2 V1.2.1:2021

• Abstract:

  The present document applies to InDoor Units (IDUs) for satellite broadcast reception. An indoor unit gets on an input; interface the signal that has been received from satellite and processed by the OutDoor Unit (ODU). It performs carrier; selection, demodulation, audio and video decoding.; IDUs in the scope of the present document demodulate broadcast carriers by means of a Zero IF tuner.; Part of the IDU functionality may be integrated with the ODU. In that case the present document applies to this part of; functionality as well as the remaining part in the IDU.; The indoor unit may be integrated with a domestic television receiver.; The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the; efficient use of radio spectrum in order to avoid harmful interference.

• Status: Published
• Public Enquiry End Date: 21-Jun-2021
• Publication Date: 21-Jul-2021
• ICS: 33.070.40 - Satellite
• ICS: 33.170 - Television and radio broadcasting
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Jul-2021
• Due Date: 25-Sep-2021
• Completion Date: 22-Jul-2021
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
  OJ Ref: L 101 OJ Date: 29-Mar-2022
• Ref Project: ETSI EN 303 372-2 V1.2.1 (2021-06) - Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 2: Indoor unit; Harmonised Standard for access to radio spectrum

Overview

SIST EN 303 372-2 V1.2.1:2021 defines harmonised requirements for Satellite Earth Stations and Systems (SES), specifically focusing on indoor units (IDUs) for satellite broadcast reception equipment. Developed by the Slovenian Institute for Standardization (SIST) and identical to ETSI EN 303 372-2, this international standard addresses the criteria for access to the radio spectrum, essential for avoiding harmful interference in satellite TV and radio broadcasting environments.

The standard applies to IDUs that process signals received from satellites via an outdoor unit (ODU). The IDU is responsible for functions such as carrier selection, demodulation, and audio/video decoding. Compliance with this standard is critical to demonstrate that the equipment supports the efficient use of the radio spectrum and operates without causing adverse effects to other systems.

Key Topics

• Scope of Application

  • Applies to indoor units designed for satellite broadcast reception, often integrated with consumer television receivers or combined with ODUs.
  • Covers IDUs that use Zero-IF tuners to demodulate broadcast carriers.

• Technical Requirements

  • Adjacent Signal Selectivity: Ensures that the receiver can effectively distinguish desired signals from adjacent channel signals to minimize interference.
  • Dynamic Range: Specifies that IDUs must operate effectively over a broad range of input signal levels, accommodating various satellite EIRP and ODU configurations.

• Compliance and Testing

  • Includes detailed procedures for verifying conformance to adjacent signal selectivity and dynamic range criteria under representative operational environments.

• Interface Considerations

  • Addresses functionality split between ODUs and IDUs and scenarios where these units are integrated or interact via protocols such as SAT>IP for IP-based delivery.

Applications

This standard is essential for manufacturers, integrators, and operators working with satellite broadcast reception systems, ensuring their equipment:

• Meets regulatory requirements for radio spectrum usage in the European Union under Directive 2014/53/EU (Radio Equipment Directive).
• Minimizes harmful interference, promoting reliable satellite TV and radio broadcast reception for end-users.
• Facilitates integration with domestic television receivers, enhancing home entertainment systems.
• Supports SAT>IP technology, enabling satellite television signal distribution over IP networks for multi-room or streaming applications.
• Is suitable for a variety of deployment scenarios, including fixed installations, consumer electronics, and professionally managed broadcast environments.

Related Standards

• ETSI EN 303 372-1: Covers outdoor units (ODU) receiving in the 10.7 GHz to 12.75 GHz frequency band.
• EN 50585:2014: Defines the SAT>IP protocol for transporting satellite signals over IP networks.
• ETSI EG 203 336: Offers guidance on selecting technical parameters when developing Harmonised Standards under the Radio Equipment Directive.
• Directive 2014/53/EU: Essential for market access, setting out legal obligations for radio equipment in the European market.

Practical Value

Implementing SIST EN 303 372-2 V1.2.1:2021 helps ensure that satellite broadcast reception equipment is:

• Conformant with European regulatory requirements, providing a trusted basis for CE marking and market access.
• Engineered for performance and reliability, supporting robust signal demodulation in diverse real-world conditions.
• Future-proof and interoperable through alignment with current protocols and adjacent standards, supporting seamless integration in evolving satellite broadcast infrastructures.

By adopting this harmonised standard, stakeholders can enhance the quality, compatibility, and compliance of satellite broadcast reception products, benefiting both service providers and consumers across the satellite communication ecosystem.

HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Part 2: Indoor unit;
Harmonised Standard for access to radio spectrum

2 ETSI EN 303 372-2 V1.2.1 (2021-06)

Reference
REN/SES-00443-2
Keywords
broadcasting, receiver, requirements, satellite

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.
ETSI
3 ETSI EN 303 372-2 V1.2.1 (2021-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Equipment capabilities . 8
4.3 Conformance requirements . 8
4.3.1 Adjacent signal selectivity . 8
4.3.2 Dynamic range . 9
5 Testing for compliance with technical requirements . 9
5.1 Environmental conditions for testing . 9
6 Test methods . 9
6.1 Adjacent signal selectivity . 9
6.2 Dynamic range . 10
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 12
Annex B (informative): Interface between ODU and IDU . 13
Annex C (normative): Applicability in conjunction with EN 50585:2014 . 14
Annex D (informative): Applicability of parameters given in ETSI EG 203 336 . 15
Annex E (informative): Other IDU features and performance characteristics . 16
Annex F (informative): Change history . 17
History . 18

ETSI
4 ETSI EN 303 372-2 V1.2.1 (2021-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations
and Systems (SES).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.5] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in ETSI
EN 303 372-1 [i.1].
National transposition dates
Date of adoption of this EN: 21 June 2021
Date of latest announcement of this EN (doa): 30 September 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2022
Date of withdrawal of any conflicting National Standard (dow): 31 March 2023

ETSI
5 ETSI EN 303 372-2 V1.2.1 (2021-06)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
See ETSI EN 303 372-1 [i.1].
ETSI
6 ETSI EN 303 372-2 V1.2.1 (2021-06)
1 Scope
The present document applies to InDoor Units (IDUs) for satellite broadcast reception. An indoor unit gets on an input
interface the signal that has been received from satellite and processed by the OutDoor Unit (ODU). It performs carrier
selection, demodulation, audio and video decoding.
IDUs in the scope of the present document demodulate broadcast carriers by means of a Zero IF tuner.
Part of the IDU functionality may be integrated with the ODU. In that case the present document applies to this part of
functionality as well as the remaining part in the IDU.
The indoor unit may be integrated with a domestic television receiver.
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 303 372-1: "Satellite Earth Stations and Systems (SES); Satellite broadcast reception
equipment; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band;
Harmonised Standard for access to radio spectrum".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI EG 203 336 (V1.2.1): "Guide for the selection of technical parameters for the production of
Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.4] EN 50585:2014: "Communications protocol to transport satellite delivered signals over IP
networks", (produced by CENELEC).
ETSI
7 ETSI EN 303 372-2 V1.2.1 (2021-06)
[i.5] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
roll-off: the bandwidth of a pulse shaping filter that is occupied beyond the symbol rate, divided by the symbol rate
signal to noise ratio threshold: lowest signal to noise ratio at demodulator input that allows receiving a bit stream
quasi error free
NOTE: The meaning of quasi error free depends on the modulation and coding standard applied. For example,
-11 -7
with DVB-S it means a bit error rate of 10 , with DVB-S2 a packet error rate of 10 a
...

SLOVENSKI STANDARD
01-september-2021
Satelitske zemeljske postaje in sistemi (SES) - Oprema za sprejemanje satelitske
radiodifuzije - 2. del: Notranja enota - Harmonizirani standard za dostop do
radijskega spektra
Satellite Earth Stations and Systems (SES) - Satellite broadcast reception equipment -
Part 2: Indoor unit - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 372-2 V1.2.1 (2021-06)
ICS:
33.070.40 Satelit Satellite
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Part 2: Indoor unit;
Harmonised Standard for access to radio spectrum

2 ETSI EN 303 372-2 V1.2.1 (2021-06)

Reference
REN/SES-00443-2
Keywords
broadcasting, receiver, requirements, satellite

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2021.
All rights reserved.
ETSI
3 ETSI EN 303 372-2 V1.2.1 (2021-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Equipment capabilities . 8
4.3 Conformance requirements . 8
4.3.1 Adjacent signal selectivity . 8
4.3.2 Dynamic range . 9
5 Testing for compliance with technical requirements . 9
5.1 Environmental conditions for testing . 9
6 Test methods . 9
6.1 Adjacent signal selectivity . 9
6.2 Dynamic range . 10
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 12
Annex B (informative): Interface between ODU and IDU . 13
Annex C (normative): Applicability in conjunction with EN 50585:2014 . 14
Annex D (informative): Applicability of parameters given in ETSI EG 203 336 . 15
Annex E (informative): Other IDU features and performance characteristics . 16
Annex F (informative): Change history . 17
History . 18

ETSI
4 ETSI EN 303 372-2 V1.2.1 (2021-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations
and Systems (SES).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.5] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in ETSI
EN 303 372-1 [i.1].
National transposition dates
Date of adoption of this EN: 21 June 2021
Date of latest announcement of this EN (doa): 30 September 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2022
Date of withdrawal of any conflicting National Standard (dow): 31 March 2023

ETSI
5 ETSI EN 303 372-2 V1.2.1 (2021-06)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
See ETSI EN 303 372-1 [i.1].
ETSI
6 ETSI EN 303 372-2 V1.2.1 (2021-06)
1 Scope
The present document applies to InDoor Units (IDUs) for satellite broadcast reception. An indoor unit gets on an input
interface the signal that has been received from satellite and processed by the OutDoor Unit (ODU). It performs carrier
selection, demodulation, audio and video decoding.
IDUs in the scope of the present document demodulate broadcast carriers by means of a Zero IF tuner.
Part of the IDU functionality may be integrated with the ODU. In that case the present document applies to this part of
functionality as well as the remaining part in the IDU.
The indoor unit may be integrated with a domestic television receiver.
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 303 372-1: "Satellite Earth Stations and Systems (SES); Satellite broadcast reception
equipment; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band;
Harmonised Standard for access to radio spectrum".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI EG 203 336 (V1.2.1): "Guide for the selection of technical parameters for the production of
Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.4] EN 50585:2014: "Communications protocol to transport satellite delivered signals over IP
networks", (produced by CENELEC).
ETSI
7 ETSI EN 303 372-2 V1.2.1 (2021-06)
[i.5] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
roll-off: the bandwidth of a pulse shaping filter that is occupied beyond the symbol
...