General Information

Abstract

This European Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V.

Status
Not Published
Public Enquiry End Date
30-Jul-2024
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
30-Jul-2026
Due Date
17-Sep-2026

Buy Documents

Draft

oSIST prEN IEC 60335-2-13:2024

English language (22 pages)
Preview
Preview
e-Library read for
1 day

Overview

kSIST FprEN IEC 60335-2-13:2026 is a European standard developed by SIST, addressing the safety requirements for household and similar electrical appliances, with a particular focus on deep fat fryers, frying pans, woks, and similar cooking appliances that use oil. The standard applies to appliances with a maximum recommended oil capacity of 5 liters and a rated voltage not exceeding 250 V.

This standard is designed for appliances intended for household use or similar environments, such as staff kitchens in offices or hotels, farmhouses, and bed-and-breakfast settings. Its aim is to minimize hazards related to electrical, mechanical, and thermal risks, ensuring a high level of domestic appliance safety and consumer protection.

Key Topics

  • Scope of Application

    • Covers electric deep fat fryers, frying pans, woks, and similar oil-using appliances for household and comparable use.
    • Excludes devices intended exclusively for commercial use, battery-operated appliances, and those used in specific environments like vehicles or explosive atmospheres.
  • Safety Requirements

    • Specifies protection against electrical shock, excessive surface temperatures, moisture ingress, and overheating.
    • Mandates clear marking and instructions, including oil level indications, warnings about hot surfaces, and safe cleaning procedures.
    • Regulates accessible surface temperature during operation, ensuring parts that may be touched during normal or abnormal use remain within defined safe temperature limits.
    • Includes test methods for leakage current, electric strength, moisture resistance, stability, and mechanical stress.
  • Hazard Protection

    • Ensures safety against hazards such as:
      • Direct access to live electrical parts,
      • Electrical insulation failure,
      • Excessive heat or fire risk,
      • Mechanical instability that could lead to tipping or spillage of hot oil,
      • Danger from improper cleaning or misuse.
  • Operational Instructions

    • Requires manufacturers to provide safe usage and cleaning guidelines,
    • Advises keeping appliances away from unsupervised children,
    • Details on safe immersion and drying procedures where applicable.

Applications

  • Household Kitchens: Ensures the safety of deep fryers and similar appliances used for domestic food preparation.
  • Institutional Settings: Applicable to staff kitchen areas in offices, shops, hotels, motels, and agricultural environments such as farmhouses.
  • Light Industry and Shared Accommodation: Covers use in environments where appliances are accessible to non-professional users but not intended for large-scale commercial food processing.

Implementing this standard helps manufacturers reduce liability, demonstrates regulatory compliance, streamlines CE marking processes for EU market access, and increases consumer confidence in small kitchen appliances.

Related Standards

  • IEC 60335-1: General requirements for household and similar electrical appliances - forms the foundation for all Part 2 standards including 60335-2-13.
  • IEC 60335-2-37: Safety requirements for commercial deep fat fryers - for appliances not covered by the household scope.
  • IEC 60335-2-39: Safety for commercial multi-purpose cooking pans.
  • IEC 60584-1: Thermocouples - referenced for temperature measurement in safety tests.
  • IEC 60320-1: Appliance couplers for household and similar general purposes.
  • Relevant national and EU electrical safety and health regulations, which may specify additional requirements for appliances in specific installations.

Practical Value

Adhering to kSIST FprEN IEC 60335-2-13:2026 ensures small kitchen appliances such as deep fat fryers and electric frying pans are safe for consumer use in domestic and similar environments. The standard’s rigor in defining test procedures, marking requirements, and usage instructions directly contributes to reduced risks of burns, electrical shock, and fire-key aspects for both producers and users of household cooking appliances. Compliance also underpins easier product acceptance in European and international markets, facilitating trust and safety across the industry.

Relations

Effective Date
03-Feb-2026
Effective Date
03-Feb-2026
Effective Date
31-Oct-2023
Effective Date
31-Oct-2023
Effective Date
31-Oct-2023
Effective Date
31-Oct-2023

Buy Documents

Draft

oSIST prEN IEC 60335-2-13:2024

English language (22 pages)
Preview
Preview
e-Library read for
1 day

Get Certified

Connect with accredited certification bodies for this standard

CIS Institut d.o.o.

Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

SA Slovenia Verified

Kiwa BDA Testing

Building and construction product certification.

RVA Netherlands Verified

Kmetijski inštitut Slovenije

Agricultural Institute of Slovenia. Soil testing, plant health, agricultural product analysis.

SA Slovenia Verified

Sponsored listings

Frequently Asked Questions

kSIST FprEN IEC 60335-2-13:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances". This standard covers: This European Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V.

This European Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V.

kSIST FprEN IEC 60335-2-13:2026 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.040.50 - Small kitchen appliances. The ICS classification helps identify the subject area and facilitates finding related standards.

kSIST FprEN IEC 60335-2-13:2026 has the following relationships with other standards: It is inter standard links to SIST EN 60584-1:2014, SIST EN IEC 60320-1:2022, kSIST FprEN IEC 60335-2-13:2026/kFprAA:2026, SIST EN 60335-2-13:2011/A11:2012, SIST EN 60335-2-13:2011, SIST EN 60335-2-13:2011/A1:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

kSIST FprEN IEC 60335-2-13:2026 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511, M/536. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

kSIST FprEN IEC 60335-2-13:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN IEC 60335-2-13:2024
01-julij-2024
Gospodinjski in podobni električni aparati - Varnost - 2-13. del: Posebne zahteve
za cvrtnike, ponve za cvrtje in podobne aparate
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements
for deep fat fryers, frying pans and similar appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-13:
Besondere Anforderungen für Frittiergeräte, Bratpfannen und ähnliche Geräte
Appareils électrodomestiques et analogues - Sécurité - Partie 2-13: Exigences
particulières pour les friteuses, les poêles à frire et appareils analogues
Ta slovenski standard je istoveten z: prEN IEC 60335-2-13:2024
ICS:
13.120 Varnost na domu Domestic safety
97.040.50 Majhni gospodinjski aparati Small kitchen appliances
oSIST prEN IEC 60335-2-13:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 60335-2-13:2024

oSIST prEN IEC 60335-2-13:2024

EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 13.120; 97.040.50 Will supersede EN 60335-2-13:2010; EN 60335-2-
13:2010/A11:2012; EN 60335-2-13:2010/A1:2019
English Version
Household and similar electrical appliances - Safety - Part 2-13:
Particular requirements for deep fat fryers, frying pans and
similar appliances
(IEC 60335-2-13:2021)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-13: Exigences particulières pour les friteuses, les ähnliche Zwecke - Teil 2-13: Besondere Anforderungen für
poêles à frire et appareils analogues Frittiergeräte, Bratpfannen und ähnliche Geräte
(IEC 60335-2-13:2021) (IEC 60335-2-13:2021)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2024-08-16.

The text of this draft consists of the text of IEC 60335-2-13:2021.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78887 Ref. No. prEN IEC 60335-2-13:2024 E

oSIST prEN IEC 60335-2-13:2024
prEN IEC 60335-2-13:2024 (E)
1 European foreword
2 This document (prEN IEC 60335-2-13:2024) consists of the text of IEC 60335-2-13:2021 prepared by
3 IEC/TC 61 "Safety of household and similar electrical appliances".
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6 This document is read in conjunction with prEN IEC 60335-2-13:2024/prAA:2024.
7 This document will supersede EN 60335-2-13:2010 and all of its amendments and corrigenda (if any).
8 This document has been prepared under a standardization request addressed to CENELEC by the European
9 Commission. The Standing Committee of the EFTA State subsequently approves these requests for its
10 Member States.
11 For relationship with EU legislation, see informative Annexes ZZA and ZZC, which are an integral part of
12 prEN IEC 60335-2-13:2024/prAA:2024.
oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13 ®
Edition 7.0 2021-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-13: Particular requirements for deep fat fryers, frying pans and similar
appliances
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-13: Exigences particulières pour les friteuses, les poêles à frire et
appareils analogues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.040.50 ISBN 978-2-8322-1044-4
oSIST prEN IEC 60335-2-13:2024
– 2 – IEC 60335-2-13:2021 © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Charging of metal-ion batteries . 13
13 Leakage current and electric strength at operating temperature . 13
14 Transient overvoltages . 13
15 Moisture resistance . 13
16 Leakage current and electric strength . 14
17 Overload protection of transformers and associated circuits . 14
18 Endurance . 14
19 Abnormal operation . 14
20 Stability and mechanical hazards . 15
21 Mechanical strength . 15
22 Construction . 15
23 Internal wiring . 16
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 17
28 Screws and connections . 17
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 17
31 Resistance to rusting . 17
32 Radiation, toxicity and similar hazards . 17
Annexes . 18
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 19
Bibliography . 20

Figure 101 – Probe for measuring surface temperatures . 17

oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13:2021 © IEC 2021 – 3 –
Table 101 – Maximum temperature rises for specified external surfaces under normal
operating conditions . 13

oSIST prEN IEC 60335-2-13:2024
– 4 – IEC 60335-2-13:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-13: Particular requirements for deep fat fryers,
frying pans and similar appliances

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60335-2-13 has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This seventh edition cancels and replaces the sixth edition published in 2009 and
Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) the text has been aligned with IEC 60335-1:2020;
b) some notes have been converted to normative text (Clause 1, 5.2, 5.101, 7.12, 15.101,
22.35, 24.1.5);
c) exclusion of battery-operated appliances (Clause 1);
d) an additional test has been introduced to limit the temperature rise of external accessible
surfaces including marking of hot surfaces (Clause 7, Clause 11).

oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13:2021 © IEC 2021 – 5 –
The text of this International Standard is based on the following documents:
Draft Report on voting
61/6381/FDIS 61/6431/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 60335 series, published under the general title Household and
similar electrical appliances – Safety, can be found on the IEC website.
This Part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When "Part 1" is mentioned in this standard, it refers to IEC 60335-1.
This Part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert
that publication into the IEC standard: Particular requirements for deep fat fryers, frying pans
and similar appliances.
When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as
far as is reasonable. When this standard states "addition", "modification" or "replacement", the
relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
− requirements: in roman type;
− test specifications: in italic type;
− notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.

oSIST prEN IEC 60335-2-13:2024
– 6 – IEC 60335-2-13:2021 © IEC 2021
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally
not earlier than 12 months or later than 36 months from the date of publication.

oSIST prEN IEC 60335-2-13:2024
IEC 60335-2-13:2021 © IEC 2021 – 7 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
Guidance documents concerning the application of the safety requirements for appliances can
be accessed via TC 61 supporting documents on the IEC website
https://www.iec.ch/tc61/supportingdocuments
This information is given for the convenience of users of this International Standard and does
not constitute a replacement for the normative text in this standard.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal
use taking into account the manufacturer's instructions. It also covers abnormal situations that
can be expected in practice and takes into account the way in which electromagnetic
phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that there
is compatibility with the wiring rules when the appliance is connected to the supply mains.
However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a Part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal publications, basic safety publications and group safety publications covering a hazard are not
applicable since they have been taken into consideration when developing the general and particular requirements
for t
...