SIST EN ISO 12625-12:2023

Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency (ISO 12625-12:2023)

ISO 12625-12:2010 specifies a test method for the determination of the tensile strength of perforated lines of tissue paper. It uses a tensile-testing apparatus operating with a constant rate of elongation.
This method is only used for measuring machine-direction tensile strength, that is for cross-direction perforations on tissue paper.
The calculation of perforation efficiency is also specified in ISO 12625-12:2010.

Tissue-Papier und Tissue-Produkte - Teil 12: Bestimmung der breitenbezogenen Bruchkraft von Perforationslinien und Berechnung der Perforationseffizienz (ISO 12625-12:2023)

Dieses Dokument legt ein Prüfverfahren für die Bestimmung der breitenbezogenen Bruchkraft an Perforationen von Tissue-Papier fest. Hierfür wird ein Zugprüfgerät benutzt, das mit einer konstanten Dehnungs¬geschwindigkeit arbeitet.
Dieses Verfahren wird nur für die Messung der breitenbezogenen Bruchkraft in Maschinenlaufrichtung angewendet, demzufolge also für die Perforation von Tissue-Papier in Maschinenquerrichtung.
Die Berechnung der Perforationseffizienz wird ebenfalls in diesem Dokument festgelegt.

Papier tissue et produits tissues - Partie 12: Détermination de la résistance à la rupture par traction des lignes de prédécoupe et calcul de l'efficacité des perforations (ISO 12625-12:2023)

L'ISO 12625-12:2010 spécifie une méthode d'essai permettant de déterminer la résistance à la rupture par traction des lignes de prédécoupe du papier tissue. Elle utilise un appareil d'essai de traction fonctionnant à une vitesse d'allongement constante.
Cette méthode doit être utilisée uniquement pour mesurer la résistance à la traction dans le sens machine, donc pour des lignes de prédécoupe dans le sens travers du papier tissue.
Le calcul de l'efficacité des perforations est également indiqué dans l'ISO 12625-12:2010.

Tissue papir in proizvodi iz tissue papirja - 12. del: Ugotavljanje natezne trdnosti perforacije in izračun učinka perforacije (ISO 12625-12:2023)

Standard ISO 12625-12:2010 določa preskusno metodo za ugotavljanje natezne trdnosti perforacije pri papirju za robčke. Uporablja napravo za preskušanje natega, ki deluje s stalno hitrostjo raztezanja.
Ta metoda se uporablja samo za merjenje natezne trdnosti v smeri obdelave, to je za perforacije v navzkrižni smeri na papirju za robce.
Izračun učinkovitosti perforacije je podan v standardu ISO 12625-12:2010.

General Information

• Status: Published
• Public Enquiry End Date: 08-Sep-2022
• Publication Date: 12-Sep-2023
• ICS: 85.080.20 - Tissue paper
• Technical Committee: VPK - Pulp, paper, board and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Jun-2023
• Due Date: 25-Aug-2023
• Completion Date: 13-Sep-2023
• Ref Project: EN ISO 12625-12:2023 - Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency (ISO 12625-12:2023)

Relations

• Replaces: SIST EN ISO 12625-12:2010 - Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010)
• Effective Date: 01-Sep-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12625-12:2023
01-oktober-2023
Nadomešča:
SIST EN ISO 12625-12:2010
Tissue papir in proizvodi iz tissue papirja - 12. del: Ugotavljanje natezne trdnosti
perforacije in izračun učinka perforacije (ISO 12625-12:2023)
Tissue paper and tissue products - Part 12: Determination of tensile strength of
perforated lines and calculation of perforation efficiency (ISO 12625-12:2023)
Tissue-Papier und Tissue-Produkte - Teil 12: Bestimmung der breitenbezogenen
Bruchkraft von Perforationslinien und Berechnung der Perforationseffizienz (ISO 12625-
12:2023)
Papier tissue et produits tissues - Partie 12: Détermination de la résistance à la rupture
par traction des lignes de prédécoupe et calcul de l'efficacité des perforations (ISO
12625-12:2023)
Ta slovenski standard je istoveten z: EN ISO 12625-12:2023
ICS:
85.080.20 Tissue papir Tissue paper
SIST EN ISO 12625-12:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12625-12:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 12625-12:2023


EN ISO 12625-12
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2023
EUROPÄISCHE NORM
ICS 85.080.20 Supersedes EN ISO 12625-12:2010
English Version

Tissue paper and tissue products - Part 12: Determination
of tensile strength of perforated lines and calculation of
perforation efficiency (ISO 12625-12:2023)
Papier tissue et produits tissues - Partie 12: Tissue-Papier und Tissue-Produkte - Teil 12:
Détermination de la résistance à la rupture par traction Bestimmung der breitenbezogenen Bruchkraft an
des lignes de prédécoupe et calcul de l'efficacité des Perforationen und Berechnung der
perforations (ISO 12625-12:2023) Perforationseffizienz (ISO 12625-12:2023)
This European Standard was approved by CEN on 13 May 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-12:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 12625-12:2023
EN ISO 12625-12:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 12625-12:2023
EN ISO 12625-12:2023 (E)
European foreword
This document (EN ISO 12625-12:2023) has been prepared by Technical Committee ISO/TC 6 "Paper,
board and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2023, and conflicting national standards
shall be withdrawn at the latest by November 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12625-12:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
...

SLOVENSKI STANDARD
oSIST prEN ISO 12625-12:2022
01-september-2022
Tissue papir in proizvodi iz tissue papirja - 12. del: Ugotavljanje natezne trdnosti
perforacije - Izračun učinka perforacije (ISO/DIS 12625-12:2022)
Tissue paper and tissue products - Part 12: Determination of tensile strength of
perforated lines - Calculation of perforation efficiency (ISO/DIS 12625-12:2022)
Tissue-Papier und Tissue-Produkte - Teil 12: Bestimmung der breitenbezogenen
Bruchkraft an Perforationen - Berechnung der Perforationseffizienz (ISO/DIS
12625‑12:2022)
Papier tissue et produits tissues - Partie 12: Détermination de la résistance à la rupture
par traction des lignes de prédécoupe - Calcul de l'efficacité des perforations (ISO/DIS
12625-12:2022)
Ta slovenski standard je istoveten z: prEN ISO 12625-12
ICS:
85.080.20 Tissue papir Tissue paper
oSIST prEN ISO 12625-12:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 12625-12:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 12625-12:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12625-12
ISO/TC 6/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-06-06 2022-08-29
Tissue paper and tissue products —
Part 12:
Determination of tensile strength of perforated lines —
Calculation of perforation efficiency
Papier tissue et produits tissues —
Partie 12: Détermination de la résistance à la rupture par traction des lignes de prédécoupe — Calcul de
l'efficacité des perforations
ICS: 85.080.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12625-12:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 12625-12:2022
ISO/DIS 12625-12:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 12625-12:2022
ISO/DIS 12625-12:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Tensile-testing apparatu
...