SIST EN ISO 6360-5:2008
Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007)
Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007)
This part of ISO 6360 specifies the code numbers for specific characteristics of root-canal instruments. This three digit number appears in the locations 10 to 12 of the 15-digit overall number and forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2.
Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 5: Besondere Eigenschaften von Wurzelkanalinstrumenten (ISO 6360-5:2007)
Dieser Teil von ISO 6360 legt Kennzahlen für besondere Eigenschaften von Wurzelkanal¬instrumenten fest. Diese dreistellige Nummer erscheint an den Stellen 10 bis 12 der 15-stelligen Gesamtnummer und bildet die vierte Gruppe mit drei Zahlen in der 15-stelligen Gesamtnummer, deren Grundsätze in ISO 6360-1 und 6360 2 beschrieben werden.
Art dentaire - Systeme de codification numérique pour instruments rotatifs - Partie 5: Caractéristiques spécifiques des instruments pour canaux radiculaires (ISO 6360-5:2007)
L'ISO 6360-5:2007 spécifie les codes pour les caractéristiques spécifiques des instruments pour canaux radiculaires. Ce nombre à trois chiffres apparaît en position 10 à 12 de l'identifiant à 15 chiffres et constitue le quatrième groupe de trois chiffres de cet identifiant, dont les principes sont expliqués dans l'ISO 6360-1 et dans l'ISO 6360-2.
Zobozdravstvo - Sistem številčnega kodiranja vrtilnih instrumentov - 5. del: Posebne lastnosti instrumentov za zobni kanal (ISO 6360-5:2007)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6360-5:2008
01-april-2008
=RER]GUDYVWYR6LVWHPãWHYLOþQHJDNRGLUDQMDYUWLOQLKLQVWUXPHQWRYGHO
3RVHEQHODVWQRVWLLQVWUXPHQWRY]D]REQLNDQDO ,62
Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics
of root-canal instruments (ISO 6360-5:2007)
Zahnheilkunde - Nummernsystem für rotierende Instrumente - Teil 5: Besondere
Eigenschaften von Wurzelkanalinstrumenten (ISO 6360-5:2007)
Art dentaire - Systeme de codification numérique pour instruments rotatifs - Partie 5:
Caractéristiques spécifiques des instruments pour canaux radiculaires (ISO 6360-
5:2007)
Ta slovenski standard je istoveten z: EN ISO 6360-5:2007
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
SIST EN ISO 6360-5:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6360-5:2008
---------------------- Page: 2 ----------------------
SIST EN ISO 6360-5:2008
EUROPEAN STANDARD
EN ISO 6360-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 11.060.25
English Version
Dentistry - Number coding system for rotary instruments - Part 5:
Specific characteristics of root-canal instruments (ISO 6360-
5:2007)
Art dentaire - Système de codification numérique pour Zahnheilkunde - Nummernsystem für rotierende
instruments rotatifs - Partie 5: Caractéristiques spécifiques Instrumente - Teil 5: Besondere Eigenschaften von
des instruments pour canaux radiculaires (ISO 6360- Wurzelkanalinstrumenten (ISO 6360-5:2007)
5:2007)
This European Standard was approved by CEN on 7 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6360-5:2007: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6360-5:2008
EN ISO 6360-5:2007 (E)
Contents Page
Foreword.3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6360-5:2008
EN ISO 6360-5:2007 (E)
Foreword
This document (EN ISO 6360-5:2007) has been prepared by Technical Committee ISO/TC 106 "Dentistry" in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at
the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 6360-5:2007 has been approved by CEN as a EN ISO 6360-5:2007 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6360-5:2008
---------------------- Page: 6 ----------------------
SIST EN ISO 6360-5:2008
INTERNATIONAL ISO
STANDARD 6360-5
First edition
2007-12-01
Dentistry — Number coding system for
rotary instruments —
Part 5:
Specific characteristics of root-canal
instruments
Art dentaire — Système de codification numérique pour instruments
rotatifs —
Partie 5: Caractéristiques spécifiques des instruments pour canaux
radiculaires
Reference number
ISO 6360-5:2007(E)
©
ISO 2007
---------------------- Page: 7 ----------------------
SIST EN ISO 6360-5:2008
ISO 6360-5:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6360-5:2008
ISO 6360-5:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 6360-5 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 4, Dental
instruments.
ISO 6360 consists of the following parts, under the general title Dentistry — Number coding system for rotary
instruments:
⎯ Part 1: General characteristics
⎯ Part 2: Shapes
⎯ Part 3: Specific characteristics of burs and cutters
⎯ Part 4: Specific characteristics of diamond instruments
⎯ Part 5: Specific characteristics of root-canal instruments
⎯ Part 6: Specific characteristics of abrasive instruments
⎯ Part 7: Specific characteristics of mandrels and special instruments
© ISO 2007 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 6360-5:2008
ISO 6360-5:2007(E)
Introduction
This part of ISO 6360 is one of a series of International Standards relating to dental rotary instruments. A wide
v
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.