35.040.99 - Other standards related to information coding

This document specifies a set of test procedures designed to verify whether bitstreams and decoders meet requirements specified in ISO/IEC 23092-1 and ISO/IEC 23092-2. Procedures are described for testing conformity of bitstreams and decoders to the requirements that are fully determined in ISO/IEC 23092-1 and ISO/IEC 23092-2. This document identifies those requirements, associates them to functionality under test and defines how conformity with them can be tested. Test bitstreams implemented ac...view more

This document specifies genomic information representation reference software, referred to as the genomic model (GM). This decoding software is provided to assess conformance to the requirements of ISO/IEC 23092-1 and ISO/IEC 23092-2.

This document provides specifications for the representation of the following types of genomic information: — unaligned sequencing reads including read identifiers and quality values; — aligned sequencing reads including read identifiers and quality values; — reference sequences.

This document specifies data formats for both transport and storage of genomic information, including the conversion process.

This document specifies information metadata, auxiliary fields, SAM interoperability, protection metadata and programming interfaces of genomic information. It defines: — metadata storage and interpretation for the different encapsulation levels as specified in ISO/IEC 23092-1 (in Clause 6); — protection elements providing confidentiality, integrity and privacy rules at the different encapsulation levels specified in ISO/IEC 23092-1 (in Clause 7); — how to associate auxiliary fields to encoded r...view more

This document provides specifications for the normative representation of the following types of genomic information: — unaligned sequencing reads including read identifiers and quality values; — aligned sequencing reads including read identifiers and quality values; — reference sequences.

This document specifies data formats for both transport and storage of genomic information, including the conversion process.

This document establishes a coding system to achieve identification of any small craft in terms of:
— identification code of the country of the manufacturer of the craft;
— identification code of the manufacturer;
— serial number;
— month and year of manufacture;
— model year.
It applies to small craft of all types and materials, of hull length, LH, up to 24 m.

IEC 62919:2017(E) specifies the requirements, protocol and the data format to visualize personal content saved on various devices, such as mobile phones, music players, personal computers, hard disk recorders and e-book devices. It also specifies methods for gathering information of digital content saved on personal devices and shared within a group, and to extract the gathered information by a uniform application interface.

IEC 62919:2017(E) specifies the requirements, protocol and the data format to visualize personal content saved on various devices, such as mobile phones, music players, personal computers, hard disk recorders and e-book devices. It also specifies methods for gathering information of digital content saved on personal devices and shared within a group, and to extract the gathered information by a uniform application interface.

This part of IEC 62056 specifies the overall structure of the OBject Identification System
(OBIS) and the mapping of all commonly used data items in metering equipment to their
identification codes.
OBIS provides a unique identifier for all data within the metering equipment, including not only
measurement values, but also abstract values used for configuration or obtaining information
about the behaviour of the metering equipment. The ID codes defined in this document are
used for the ide...view more

IEC 62919:2017(E) specifies the requirements, protocol and the data format to visualize personal content saved on various devices, such as mobile phones, music players, personal computers, hard disk recorders and e-book devices.  It also specifies methods for gathering information of digital content saved on personal devices and shared within a group, and to extract the gathered information by a uniform application interface.

IEC 61987-16:2016 provides an - operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a density measuring equipment, and - device lists of properties (DLOP) for a range of density measuring equipment types describing them. The structures of the OLOP and the DLOP correspond with the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.

IEC 61987-16:2016 provides an
- operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a density measuring equipment, and
- device lists of properties (DLOP) for a range of density measuring equipment types describing them.
The structures of the OLOP and the DLOP correspond with the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.

This part of ISO 28560 defines rules for ISO 28560-1 data elements to be encoded in radio frequency
identification (RFID) tags with a memory structure that is partitioned into four memory banks. This
primarily applies to ISO/IEC 18000-63 (previously known as ISO/IEC 18000-6 Type C) operating in the
UHF frequency, but not necessarily restricted to this technology.
The rules for encoding a subset of data elements taken from the total set of data elements defined in
ISO 28560-1 are based on IS...view more

This part of the Technical Specification defines the representation of ID-tags as a 62-position bar-no-bar code (BNB-62) printed in fluorescent ink in area R1 on the reverse side of items. BNB-62 encoding is one of two encoding specifications supported by this Technical Specification 3) for the printing of ID-tags in area R1, the other being BNB-78, which is specified in CEN/TS 15844-2. NOTE 1 Representation in the form of a 4-state code printed on the front of the item is covered in CEN/TS 1584...view more

This part of the Technical Specification defines the representation of ID-tags as a Postal-4i symbology 4-state bar code printed on the front side of small letters. Postal-4i symbology 4-state encoding is the only encoding specification supported by this Technical Specification 3) for the printing of ID-tags on the front of items. NOTE Representation in the form of fluorescent BNB bar codes printed on the reverse side of small letters (not flats) is covered in CEN/TS 15844-2 and CEN/TS 15844-3.

This Technical Specification defines the information content, structure and possible printed representations of the S18 ID-tag. This is an identifier for individual mail items which:
-is globally unique;
-can be applied to any item which is not already ID-tagged by any postal administration (or other issuer) which previously processed the item; NOTE 1 The S18 ID-tag provides a standard means of ID-tagging which can be applied on a world-wide basis, allowing inter-administration mail items to...view more

This International Standard specifies the minimal characteristics of a categorial structure for terminological systems of surgical procedures and the minimal domain constraints to support interoperability, comparability and the exchange of meaningful information on surgical procedures, independently of the language, insofar as the significant differences are specified by the system.

IEC 62243:2012(E) defines formal specifications for supporting system diagnosis. These specifications support the exchange and processing of diagnostic information and the control of diagnostic processes. Diagnostic processes include, but are not limited to, testability analysis, diagnosability assessment, diagnostic reasoning, maintenance support, and diagnostic maturation.