SIST EN ISO 17078-1:2005/A1:2010
(Amendment)Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels - Amendment 1 (ISO 17078-1:2004/Amd 1:2010)
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels - Amendment 1 (ISO 17078-1:2004/Amd 1:2010)
MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!! MINOR AMENDMENT!!!
Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtungen - Teil 1: Seitentaschen-Rohre - Änderung 1 (ISO 17078-1:2004/Amd 1:2010)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie 1: Raccords à poche latérale - Amendement 1 (ISO 17078-1:2004/Amd 1:2010)
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema - 1. del: Vpenjalna os s stranskimi žepi - Dodatek 1 (ISO 17078-1:2004/Amd 1:2010)
Amandma A1:2010 je dodatek k standardu SIST EN ISO 17078-1:2005
Ta del ISO 17078 podaja zahteve za vpenjalne osi s stranskimi žepi, ki se uporabljajo v industriji za predelavo nafte in zemeljskega plina. Ta del ISO 17078 zajema določanje, izbiranje, načrtovanje, izdelovanje, nadzor kakovosti, preskušanje in pripravo za transport vpenjalnih osi s stranskimi žepi. Ta del ISO 17078 se ne ukvarja in ne zajema zahtev za končne priključke med vpenjalnimi osmi s stranskimi žepi in vodom vrtine. Namestitev in ponovna uporaba vpenjalnih osi s stranskimi žepi je izven področja tega dela ISO 17078. Poleg tega ta del ISO 17078 ne zajema specifikacij za centralno nameščene vpenjalne osi ali vpenjalne osi, ki uporabljajo ali podpirajo regulatorje pretoka z obnovljivimi cevovodi. Ta del ISO 17078 ne zajema plinskih dvižnikov ali kakršnih koli drugih ventilov ali naprav za nadzor pretoka, zapahov in/ali povezane žične opreme, ki jih lahko ali ne zajemajo druge ISO specifikacije. Vpenjalne osi s stranskim žepi, na katere se nanaša ta del ISO 17078, so neodvisne naprave, ki lahko sprejmejo namestitev regulatorjev pretoka ali drugih naprav v vrtini.
General Information
Relations
Related Packages
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17078-1:2005/kFprA1:2010
01-januar-2010
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema -
1. del: Vpenjalna os s stranskimi žepi - Dodatek 1 (ISO 17078-1:2004/FDAM 1:2009)
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-
pocket mandrels - Amendment 1 (ISO 17078-1:2004/FDAM 1:2009)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie
1: Raccords à poche latérale - Amendement 1 (ISO 17078-1:2004/FDAM 1:2009)
Ta slovenski standard je istoveten z: EN ISO 17078-1:2004/FprA1
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 17078-1:2005/kFprA1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17078-1:2005/kFprA1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 17078-1:2005/kFprA1:2010
EUROPEAN STANDARD
FINAL DRAFT
EN ISO 17078-1:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2009
ICS 75.180.10
English Version
Petroleum and natural gas industries - Drilling and production
equipment - Part 1: Side-pocket mandrels - Amendment 1 (ISO
17078-1:2004/FDAM 1:2009)
Industries du pétrole et du gaz naturel - Équipement de
forage et de production - Partie 1: Raccords à poche
latérale - Amendement 1 (ISO 17078-1:2004/FDAM
1:2009)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 12.
This draft amendment A1, if approved, will modify the European Standard EN ISO 17078-1:2004. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17078-1:2004/FprA1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17078-1:2005/kFprA1:2010
EN ISO 17078-1:2004/FprA1:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17078-1:2005/kFprA1:2010
EN ISO 17078-1:2004/FprA1:2009 (E)
Foreword
This document (EN ISO 17078-1:2004/FprA1:2009) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
Endorsement notice
The text of ISO 17078-1:2004/FDAM 1:2009 has been approved by CEN as a EN ISO 17078-
1:2004/FprA1:2009 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17078-1:2005/kFprA1:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 17078-1:2005/kFprA1:2010
FINAL ISO
AMENDMENT
DRAFT 17078-1:2004
FDAM 1
ISO/TC 67/SC 4
Petroleum and natural gas industries —
Secretariat: ANSI
Drilling and production equipment —
Voting begins on:
2009-11-19
Part 1:
Side-pocket mandrels
Voting terminates on:
2010-01-19
AMENDMENT 1
Industries du pétrole et du gaz naturel — Équipement de forage et de
production —
Partie 1: Raccords à poche latérale
AMENDEMENT 1
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORT-
ING DOCUME
...
SLOVENSKI STANDARD
SIST EN ISO 17078-1:2005/A1:2010
01-maj-2010
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema -
1. del: Vpenjalna os s stranskimi žepi - Dodatek 1 (ISO 17078-1:2004/Amd 1:2010)
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-
pocket mandrels - Amendment 1 (ISO 17078-1:2004/Amd 1:2010)
Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtungen - Teil 1: Seitentaschen-
Rohre - Änderung 1 (ISO 17078-1:2004/Amd 1:2010)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie
1: Raccords à poche latérale - Amendement 1 (ISO 17078-1:2004/Amd 1:2010)
Ta slovenski standard je istoveten z: EN ISO 17078-1:2004/A1:2010
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 17078-1:2005/A1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17078-1:2005/A1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 17078-1:2005/A1:2010
EUROPEAN STANDARD
EN ISO 17078-1:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2010
ICS 75.180.10
English Version
Petroleum and natural gas industries - Drilling and production
equipment - Part 1: Side-pocket mandrels - Amendment 1 (ISO
17078-1:2004/Amd 1:2010)
Industries du pétrole et du gaz naturel - Équipement de Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtungen
forage et de production - Partie 1: Raccords à poche - Teil 1: Seitentaschen-Rohre - Änderung 1 (ISO 17078-
latérale - Amendement 1 (ISO 17078-1:2004/Amd 1:2010) 1:2004/Amd 1:2010)
This amendment A1 modifies the European Standard EN ISO 17078-1:2004; it was approved by CEN on 22 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17078-1:2004/A1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17078-1:2005/A1:2010
EN ISO 17078-1:2004/A1:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17078-1:2005/A1:2010
EN ISO 17078-1:2004/A1:2010 (E)
Foreword
This document (EN ISO 17078-1:2004/A1:2010) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 17078:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and
conflicting national standards shall be withdrawn at the latest by September 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
R
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.