kSIST FprEN IEC 55011:2023
(Amendment)Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
2022-05-30: Fragments 1 to 7 circulated to parallel CDV separately, then merged into this PR before FDIS stage
2020-10-06: PR changed from A3 to new edition furhter to same change at IEC
Industrielle, wissenschaftliche und medizinische Geräte - Funkstörungen - Grenzwerte und Messverfahren
Appareils industriels, scientifiques et médicaux - Caractéristiques de perturbations radioélectriques - Limites et méthodes de mesure
Industrijska, znanstvena in medicinska oprema - Karakteristike radio frekvenčnih motenj - Mejne vrednosti in merilne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST FprEN IEC 55011:2023
01-junij-2023
Industrijska, znanstvena in medicinska oprema - Karakteristike občutljivosti za
radijske motnje - Mejne vrednosti in merilne metode
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement
Industrielle, wissenschaftliche und medizinische Geräte - Funkstörungen - Grenzwerte
und Messverfahren
Appareils industriels, scientifiques et médicaux - Caractéristiques de perturbations
radioélectriques - Limites et méthodes de mesure
Ta slovenski standard je istoveten z: prEN IEC 55011:2023
ICS:
33.100.10 Emisija Emission
oSIST FprEN IEC 55011:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST FprEN IEC 55011:2023
---------------------- Page: 2 ----------------------
oSIST FprEN IEC 55011:2023
CIS/B/820/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
CISPR 11 ED7
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-04-07 2023-06-30
SUPERSEDES DOCUMENTS:
CIS/B/802/FDIS, CIS/B/809A/RVD
IEC CIS/B : INTERFERENCE RELATING TO INDUSTRIAL, SCIENTIFIC AND MEDICAL RADIO-FREQUENCY APPARATUS, TO OTHER
(HEAVY) INDUSTRIAL EQUIPMENT, TO OVERHEAD POWER LINES, TO HIGH VOLTAGE EQUIPMENT AND TO ELECTRIC TRACTION
SECRETARIAT: SECRETARY:
Japan Mr Hirokazu Tokuda
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
CIS/H
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics -
Limits and methods of measurement
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
This CDV implements decision 3 of the CIS/B meeting in San Francisco where it was decided to
continue the project CISPR 11 (after the failed B/802/FDIS) with a CDV which contains the technical
aspects of the fragments f2, f4, f5, f6 and f7.
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part
of it, for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST FprEN IEC 55011:2023
IEC CDV CISPR 11/Ed7 © IEC 2023 – 2 – CIS/B/820/CDV
1 INTRODUCTION TO THIS CDV
2 Note: the text of this INTRODUCTION will not be part of a final publication of the next edition
3 of CISPR 11.
4 The maintenance activities related to CISPR 11 Ed. 6.2 started in 2016 with the document
5 B/662/DC and the outcome given in B/670/INF. The latest document on those maintenance
6 activities was B/802/FDIS, which however failed the vote.
7 The further progress with respect to that project was discussed at the CISPR/B meeting in
8 San Francisco in 2022 (see B/813/RM). There it was decided, see decision3 of B/811/DL to
9 continue with the project in that way that contents related to the topic of WPT will be removed
10 from the current project and will be separately treated in future amendments or editions. The
11 other fragments, i.e. f2, f4, f5, f6, and f7, will be merged together in this CDV which contains:
12 • f2: general maintenance issues, as for example revision of definitions and annexes
13 (following B/739/CD, B/757/CC, B/761/CD, B/772/CC, B/777/CDV and B/794/RVC)
14 • f4: requirements when performing emission measurements on robots (following
15 B/741/CD, B/751/CC, B/754/CD, B/768/CC, B/779/CDV and B/798/RVC)
16 • f5: requirements for wired network ports (following B/742/CD, B/753/CC, B/758/CD,
17 B/771/CC, B/780/CDV and B/797/RVC)
18 • f6: requirements for Group 1 equipment in the frequency range above 1 GHz (following
19 B/743/CD, B/755/CC, B/759/CD, B/769/CC,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.