Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method

Strukturklebstoffe - Charakterisierung einer Oberfläche durch Messung der Adhäsion nach dem Dreipunkt-Biegeverfahren

Adhésifs structuraux - Caractérisation d'une surface par mesure de l'adhésion au moyen de la méthode de la flexion en trois points

La présente Norme européenne décrit une méthode d'essai dite " de flexion à trois points " pour déterminer l'aptitude d'un adhésif durci (éventuellement recouvert d'un primaire) à adhérer sur un substrat qui a subi un traitement de surface spécifique ou possède un certain état de surface.
Cette méthode est utilisée uniquement dans le cadre de l'assurance qualité, et il convient que le substrat soit suffisamment rigide et résistant à la flexion, comme l'acier ou les alliages d'aluminium. Pour les autres types de substrats, il convient que l'épaisseur soit ajustée sur le module d'élasticité ; il est également possible d'utiliser un raidisseur approprié.
Il convient que l'adhésif soit polymérisable (durci) sans pression afin d'obtenir l'épaisseur nécessaire pour apporter une rigidité suffisante ; dans le cas contraire, une pièce de renfort collée, du même type et de même épaisseur que le substrat, peut remplacer le bloc d'adhésif.
La méthode ne convient pas aux adhésifs en film.

Konstrukcijska lepila - Opredelitev površine z merjenjem oprijema po metodi tritočkovnega upogiba

General Information

Status
Withdrawn
Publication Date
30-Apr-2003
Withdrawal Date
01-Apr-2009
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Apr-2009
Due Date
25-Apr-2009
Completion Date
02-Apr-2009

Relations

Buy Standard

Standard
EN 1966:2003
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Strukturklebstoffe - Charakterisierung einer Oberfläche durch Messung der Adhäsion nach dem Dreipunkt-BiegeverfahrenAdhésifs structuraux - Caractérisation d'une surface par mesure de l'adhésion au moyen de la méthode de la flexion en trois pointsStructural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1966:2002SIST EN 1966:2003en01-maj-2003SIST EN 1966:2003SLOVENSKI
STANDARDSIST ENV 1966:1998/AC:1998SIST ENV 1966:19981DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1966November 2002ICS 83.180Supersedes ENV 1966:1995English versionStructural adhesives - Characterisation of a surface bymeasuring adhesion by means of the three point bendingmethodAdhésifs structuraux - Caractérisation d'une surface parmesure de l'adhésion au moyen de la méthode de laflexion en trois pointsStrukturklebstoffe - Charakterisierung einer Oberflächedurch Messung der Adhäsion nach dem Dreipunkt-BiegeverfahrenThis European Standard was approved by CEN on 16 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1966:2002 ESIST EN 1966:2003
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.