Aerospace series - Management of unsalvageable items

This document is applicable to all items used for manufacturing, maintenance, and repair of aviation, space, and defense products from the raw material to the final product (e.g. aircraft, structural items, constituent assemblies, standard parts, consumables with conformity and/or safety impact).
This document considers items dispositioned as scrap in accordance with 8.7 of the EN 9100 series of standards supporting nonconformity management and/or organization decisions (e.g. obsolescence, inventory management, missing traceability documentation).
The requirements specified in this document are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this document and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements take precedence.
This document defines requirements and actions to be taken after the disposition decision to control the unsalvageable items within the organization and its external providers.

Luft- und Raumfahrt - Management nichtverwendbarer Gegenstände

Dieses Dokument ist anwendbar für alle Gegenstände, die für die Herstellung, Instandhaltung und Reparatur von Luft-, Raumfahrt- und Verteidigungsprodukten verwendet werden, vom Rohmaterial bis zum Endprodukt (z. B. Luftfahrzeuge, strukturelle Elemente, Baugruppen, Standardteile, Verbrauchsmaterialien mit Auswirkungen auf die Konformität und/oder Sicherheit).
Dieses Dokument bezieht sich auf Gegenstände, die der Verschrottung zugeführt werden, in Übereinstimmung mit den Normen der EN 9100-Familie, die das Management von Nichtkonformitäten, Korrekturmaßnahmen oder Organisationsentscheidungen unterstützen (z. B. Veralterung, Bestandsmanagement, fehlende Rückverfolgbarkeitsdokumentation).
Die in diesem Dokument festgelegten Anforderungen, sind komplementär (nicht alternativ) zu den vertraglichen und gültigen gesetzlichen und behördlichen Anforderungen. Falls es einen Konflikt zwischen den Anforderungen dieses Dokuments und den gültigen gesetzlichen und behördlichen Anforderungen geben sollte, haben die geltenden gesetzlichen oder behördlichen Anforderungen Vorrang.
Dieses Dokument legt die Anforderungen und Maßnahmen fest, die nach der Verfügungsentscheidung zu ergreifen sind, um die nichtverwendbaren Gegenstände innerhalb der Organisation und ihrer externen Anbieter zu kontrollieren.
ANMERKUNG   Die Kontrolle von externen Anbietern wird in der Normenfamilie EN 9100 behandelt.

Série aérospatiale - Gestion des éléments irrécupérables

Le présent document s'applique à tous les éléments servant à la fabrication, à la maintenance et à la réparation de produits des secteurs de l'aéronautique, de l'espace et de la défense, de la matière première jusqu’au produit final (par exemple : aéronefs, éléments de structure, ensembles de constituants, pièces normalisées, consommables ayant un impact sur la conformité et/ou la sécurité).
Le présent document considère les éléments éliminés comme étant mis au rebut conformément à la gestion des non-conformités, aux actions correctives ou aux décisions d'organisation (par exemple : obsolescence, gestion des stocks, absence de documents de traçabilité) des normes de la série EN 9100.
Les exigences spécifiées dans le présent document sont complémentaires (et non alternatives) des exigences contractuelles ainsi que des exigences légales et réglementaires applicables. En cas de conflit entre les exigences du présent document et les exigences légales ou réglementaires applicables, ce sont ces dernières qui prévalent.
Le présent document définit les exigences et les actions à mettre en œuvre après la décision d'élimination afin de maîtriser les éléments irrécupérables au sein de l'organisme et chez ses prestataires externes.
NOTE   La maîtrise du prestataire externe est abordée dans les normes de la série EN 9100.

Aeronavtika - Ravnanje z nepopravljivimi predmeti

Ta dokument se uporablja za vse predmete, ki se uporabljajo za proizvodnjo, vzdrževanje in popravilo letalskih, vesoljskih ter obrambnih proizvodov od surovine do končnega izdelka (npr. letala, konstrukcijski elementi, sestavni in standardni deli ter potrošni materiali, ki vplivajo na skladnost in/ali varnost).
Ta dokument obravnava predmete, odstranjene kot odpadki v skladu s točko 8.7 skupine standardov EN 9100, ki podpira upravljanje neskladnosti in/ali organizacijske odločitve (npr. zastarelost, upravljanje zalog, manjkajoča dokumentacija o sledljivosti).
Zahteve iz tega dokumenta dopolnjujejo (niso alternativna možnost) pogodbene ter ustrezne zakonske in regulativne zahteve. V primeru neskladnosti med zahtevami iz tega dokumenta in ustreznimi zakonskimi ali regulativnimi zahtevami imajo prednost ustrezne zakonske ali regulativne zahteve.
Ta dokument določa zahteve in ukrepe, ki jih je treba izvesti po sprejetju odločitve glede odstranitve, da se omogoči nadzorovanje nepopravljivih predmetov znotraj organizacije in njenih zunanjih izvajalcev.

General Information

Status
Published
Public Enquiry End Date
28-Nov-2018
Publication Date
13-Dec-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Dec-2022
Due Date
11-Feb-2023
Completion Date
14-Dec-2022

Buy Standard

Standard
EN 9147:2023 - BARVE
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 9147:2018
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 9147:2023
01-februar-2023
Aeronavtika - Ravnanje z nepopravljivimi predmeti
Aerospace series - Management of unsalvageable items
Luft- und Raumfahrt - Management nichtverwendbarer Gegenstände
Série aérospatiale - Gestion des éléments irrécupérables
Ta slovenski standard je istoveten z: EN 9147:2022
ICS:
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9147:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 9147:2023

---------------------- Page: 2 ----------------------
SIST EN 9147:2023


EN 9147
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2022
EUROPÄISCHE NORM
ICS 49.020
English Version

Aerospace series - Management of unsalvageable items
Série aérospatiale - Gestion des éléments Luft- und Raumfahrt - Management nichtverwendbarer
irrécupérables Gegenstände
This European Standard was approved by CEN on 8 May 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9147:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 9147:2023
EN 9147:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 7
4.1 General requirements . 7
4.2 Unsalvageable item management process requirements . 7
4.3 Scrapping options . 8
Annex A (informative) Unsalvageable items management flowchart . 9
Figure A.1 — Unsalvageable items management flowchart . 9
Bibliography . 10

2

---------------------- Page: 4 ----------------------
SIST EN 9147:2023
EN 9147:2022 (E)
European foreword
This document (EN 9147:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by May 2023, and conflicting national standards shall be withdrawn at
the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 9147:2023
EN 9147:2022 (E)
Introduction
The International Aerospace Quality Group (IAQG), with representatives from aviation, space, and
defence in the Americas, Asia/Pacific, and Europe, benchmarked industry best practices and guidance
to develop the requirements of unsalvageable items management. The key objectives of this document
are to:
— prevent unsalvageable items from being used for manufacturing, maintenance, or repair of aviation,
space, and defence products;
— specify the conditions of their reclassifications; and
— mitigate the risk of unsalvageable items being disassembled.
This document is complementary to EN 9100-series standards (i.e. EN 9100, EN 9110, EN 9120)
requirements associated to the control of nonconforming products.
This document standardizes unsalvageable item management process requirements to the greatest
extent possible. It can be used at all levels of the supply chain by organisations around the world to
mitigate the risk to use unsalvageable items within aviation, space, and defence products to improve
and ensure the performance, reliability, and safety of these products.
This document provides the following potential benefits:
— standardizes unsalvageable management process requirements;
— integrates aviation, space, and defence industry best practices and guidance;
— increases product quality and safety;
— achieves cost savings due to unsalvageable item reclassifications;
— reduces waste/environmental footprint by fostering reclassification;
— protects companies’ intellectual property by preventing reverse engineering on unsalvageable
items.

4

---------------------- Page: 6 ----------------------
SIST EN 9147:2023
EN 9147:2022 (E)
1 Scope
This document is applicable to all items used for manufacturing, maintenance, and repair of aviation,
space, and defence products from the raw material to the final product (e.g. aircraft, structural items,
constituent assemblies, standard parts, consumables with conformity and/or safety impact).
This document considers items dispositioned as scrap in accordance with EN 9100-series standards’
supporting nonconformity management, corrective action, or organisation decisions (e.g. obsolescence,
inventory management, missing traceability documentation).
The requirements specified in this document are complementary (not alternative) to contractual and
applicable statutory and regulatory requirements. Should there be a conflict between the r
...

SLOVENSKI STANDARD
oSIST prEN 9147:2018
01-november-2018
Aeronavtika - Ravnanje z nepopravljivimi predmeti
Aerospace series - Management of unsalvageable Items
Luft- und Raumfahrt - Management nichtverwendbarer Gegenstände
Série aérospatiale - Gestion des éléments irrécupérables
Ta slovenski standard je istoveten z: prEN 9147
ICS:
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
oSIST prEN 9147:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 9147:2018

---------------------- Page: 2 ----------------------
oSIST prEN 9147:2018


DRAFT
EUROPEAN STANDARD
prEN 9147
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2018
ICS 49.020
English Version

Aerospace series - Management of unsalvageable Items
Série aérospatiale - Gestion des éléments Luft- und Raumfahrt - Management nichtverwendbarer
irrécupérables Gegenstände
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 9147:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 9147:2018
prEN 9147:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 General requirements . 5
4.2 Unsalvageable item management program requirements . 5
4.3 Scrapping options . 6
Annex A (informative) Unsalvageable items management flowchart . 8
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 9147:2018
prEN 9147:2018 (E)
European foreword
This document (prEN 9147:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
The International Aerospace Quality Group (IAQG), with representatives from companies in the
Americas, Asia/Pacific, and Europe, benchmarked industry best practices and guidance to develop the
requirements of unsalvageable items management. The key objectives of this European standard are to
prevent unsalvageable items to be used for manufacturing, maintenance, or repair of aviation, space,
and defense products, and to specify the conditions of their reclassifications.
This European standard is complementary to the EN 9100 series of standards (i.e. EN 9100, EN 9110
and EN 9120) requirements associated to the control of nonconforming products.
Rationale:
This document standardizes unsalvageable item management program requirements to the greatest
extent possible and can be used at all levels of the supply chain by organizations around the world to
mitigate the risk to use unsalvageable items within aviation, space, and defense products to improve
and ensure the performance, reliability, and safety of these products.
This document provides the following potential benefits:
— standardizes unsalvageable management program requirements;
— integrates aviation, space, and defense industry best practices and guidance;
— increases product quality and safety;
— achieves cost savings due to unsalvageable item reclassifications;
— reduces waste/environmental footprint by fostering reclassification;
— protects companies’ intellectual property by preventing reverse engineering on the scrapped items.
3

---------------------- Page: 5 ----------------------
oSIST prEN 9147:2018
prEN 9147:2018 (E)
1 Scope
This document is applicable to all items used for manufacturing, maintenance, and repair of aviation,
space, and defense products from the raw material to the final product (e.g. aircraft, structural items,
constituent assemblies, standard parts, consumables with conformity and/or safety impact).
This document considers items dispositioned as scrap in accordance with 8.7 of the EN 9100 series of
standards supporting nonconformity management and/or organization decisions (e.g. obsolescence,
inventory management, missing traceability documentation).
The requirements specified in this document are complementary (not alternative) to contractual and
applicable statutory and regulatory requirements. Should there be a conflict between the requirements
of this document and applicable statutory or regulatory requirements, the applicable statutory or
regulatory requirements take precedence.
This document defines requirements and actions to be taken after the disposition decision to control
the unsalvageable items within the organization and its external providers.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.