Rigid underlays for discontinuous roofing - Definitions and characteristics

This European Standard specifies the technical requirements for factory made flat or profiled sheets (wood-based, fibre cement flat sheets or corrugated bituminous sheets or other materials which can be characterised as one of these materials) that are used as underlays in pitched roof constructions with discontinuously laid coverings (e.g. tiles, slates). This European Standard also establishes methods of inspection and testing as well as criteria for evaluation of conformity.
This European Standard does not include rigid underlays which have a stiffening function or a load bearing function.

Unterdeckplatten für Dachdeckungen - Definitionen und Eigenschaften

Diese Europäische Norm legt die technischen Anforderungen an fabrikgefertigte Platten mit oder ohne Profil (Holzwerkstoffplatten, Faserzement Tafeln oder Bitumen Wellplatten; sonstige Werkstoffe sind einem dieser Werkstoffe zuzuordnen) fest, die als Unterdeckplatten bei Schrägdächern mit überlappender Eindeckung (z. B. mit Dachziegeln oder Schieferplatten) verwendet werden. In dieser Europäischen Norm werden auch Inspektions  und Prüfverfahren sowie Kriterien für die Konformitätsbewertung festgelegt.
In dieser Europäischen Norm werden keine Unterdeckplatten behandelt, die zur Aussteifung verwendet werden oder eine last¬tragende Funktion ausüben.

Ecrans rigides de sous-toiture pour pose en discontinu - Définitions et caractéristiques

La présente Norme européenne spécifie les exigences techniques relatives aux plaques planes ou profilées
fabriquées en usine (par exemple panneaux a base de bois, panneaux plats en fibres-ciment ou plaques
ondulées bitumées ou tout autre matériau pouvant etre caractérisé comme l'un de ces matériaux) utilisées
comme écrans rigides dans les constructions de toitures inclinées a couverture en pose discontinue (par
exemple tuiles ou ardoises). Elle établit également des méthodes de contrôle et d'essai ainsi que des criteres
d'évaluation de la conformité.
La présente Norme européenne ne traite pas des écrans rigides de sous-toiture servant de raidisseurs ou de
porteurs.

Toge podložne folije za strehe - Definicije in lastnosti

General Information

Status
Published
Publication Date
28-Feb-2007
Withdrawal Date
28-Feb-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2007
Due Date
01-Mar-2007
Completion Date
01-Mar-2007

Buy Standard

Standard
EN 14964:2007
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rigid underlays for discontinuous roofing - Definitions and characteristicsToge podložne folije za strehe - Definicije in lastnostiEcrans rigides de sous-toiture pour pose en discontinu - Définitions et caractéristiquesUnterdeckplatten für Dachdeckungen - Definitionen und EigenschaftenTa slovenski standard je istoveten z:EN 14964:2006SIST EN 14964:2007en91.060.20StreheRoofsICS:SLOVENSKI
STANDARDSIST EN 14964:200701-marec-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14964October 2006ICS 91.060.20 English VersionRigid underlays for discontinuous roofing - Definitions andcharacteristicsEcrans rigides de sous-toiture pour pose en discontinu -Définitions et caractéristiquesUnterdeckplatten für Dachdeckungen - Definitionen undEigenschaftenThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14964:2006: E



EN 14964:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Product characteristics and test methods.7 4.1 General.7 4.2 Dimensions and tolerances (dimensional variation).7 4.3 Application-related characteristics.8 4.3.1 Mechanical resistance.8 4.3.2 Reaction to fire.9 4.3.3 Water impermeability.10 4.3.4 Water vapour permeability.10 4.3.5 Durability.10 4.3.6 Thermal resistance.11 4.3.7 Airborne sound insulation.11 5 Evaluation of conformity.11 5.1 General.11 5.2 Initial type testing.12 5.3 Factory production control (FPC).12 5.3.1 General.12 5.3.2 Frequency of testing.12 6 Marking, labelling and packaging.12 Annex A (normative)
Rules for factory production control.14 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.15 ZA.1 Scope and relevant characteristics.15 ZA.2 Procedure for the attestation of conformity of rigid underlays for discontinuous roofing.17 ZA.2.1 Systems of attestation of conformity.17 ZA.2.2 EC Certificate and Declaration of conformity.20 ZA.3 CE conformity marking.21 Bibliography.24



EN 14964:2006 (E) 3 Foreword This document (EN 14964:2006) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinuous laying and products for wall cladding”, the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by July 2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is a product specification for rigid underlays of the type defined in Clause 3 of this European Standard and commonly used in a number of applications for roofing used in buildings. Underlays of the type specified in this European Standard are deemed to be construction products in accordance with Article 1 of the Construction Products Directive (CPD). The general test method standards referred to in this product specification fall within the scope of CEN/TC 128 unless otherwise stated in this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 14964:2006 (E) 4 Introduction Article 2 of the CPD requires that construction products be fit for intended use, that is to say that the products shall have the characteristics enabling the works incorporating such products to satisfy the Essential Requirements referred to in Article 3 of the CPD. The harmonized characteristics specified by this European Standard are derived from Mandate M/122 “Roof coverings, rooflights, roof windows and ancillary products”. It contains also voluntary characteristics. Annex ZA indicates which characteristics of this European Standard are harmonized. The test methods referred to in this European Standard relate to the use of rigid underlays in roofing.



EN 14964:2006 (E) 5
1 Scope This European Standard specifies the technical requirements for factory made flat or profiled sheets (wood-based, fibre cement flat sheets or corrugated bituminous sheets or other materials which can be characterised as one of these materials) that are used as underlays in pitched roof constructions with discontinuously laid coverings (e.g. tiles, slates). This European Standard also establishes methods of inspection and testing as well as criteria for evaluation of conformity. This European Standard does not include rigid underlays which have a stiffening function or a load bearing function. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 300, Oriented Strand Boards (OSB) — Definitions, classification and specifications EN 312, Particleboards — Specifications EN 324-1, Wood-based panels — Determination of dimensions of boards — Part 1: Determination of thickness, width and length EN 324-2, Wood-based panels — Determination of dimensions of boards — Part 2: Determination of squareness and edge straightness EN 534:2006 Corrugated bitumen sheets — Product specification and test methods EN 622-2, Fibreboards — Specifications — Part 2: Requirements for hardboards EN 622-3, Fibreboards — Specifications — Part 3: Requirements for medium boards EN 622-4, Fibreboards — Specifications — Part 4: Requirements for softboards EN 622-5, Fibreboards — Specifications — Part 5: Requirements for dry process boards (MDF) EN 636, Plywood — Specifications EN 12467:2004, Fibre cement flat sheets — Product specifications and test methods EN 12524:2000, Building materials and products — Hygrothermal properties — Tabulated design values EN 12664, Thermal performance of building materials and products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Dry and moist products of medium and low thermal resistance EN 13501-1:2002, Fire classification of construction products and building elements — Part 1: Classification using test data from reaction to fire tests EN 13986:2004, Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking EN 14279, Laminated Veneer Lumber (LVL) — Definitions, classification and specifications



EN 14964:2006 (E) 6 EN ISO 140-3, Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995) EN ISO 717-1, Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation (ISO 717-1:1996) EN ISO 12572, Hygrothermal performance of building materials and products — Determination of water vapour transmission properties (ISO 12572:2001) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 rigid underlay factory made flat or profiled sheets: wood-based panels, fibre cement sheets, corrugated bitumen sheets or sheets of other materials.
NOTE They are used as underlay to coverings of pitched roofs (e.g. tiles, slates). They can be laid overlapping, one sheet covering the other (OL) or interlocking, sheets side by side (IL) 3.1.1 wood-based panel solid wood panel, laminated veneer lumber (LVL), plywood, oriented strand board (OSB), resin-bonded particleboard, cement-bonded particleboard, fibreboard or wood fibre insulation board 3.1.2 fibre cement flat sheet sheets consisting essentially of cement or a calcium silicate formed by a chemical reaction of a siliceous and a calcareous material, reinforced by organic and/or inorganic fibres.
NOTE Fibre cement sheets can be pressed or un-pressed 3.1.3 corrugated bitumen sheet profiled sheet consisting of an intimate and homogeneous mixture of organic and/or inorganic fibres and bitumen.
NOTE The surface may be natural coloured, spun-dyed, coated, granulised or mineralised 3.2 sampling procedure used to draw or constitute a sample 3.3 sample sheet from which a test piece is taken 3.3.1 test piece part of the sample from which test specimens are taken 3.3.2 test specimen piece of accurate dimensions taken from the test piece



EN 14964:2006 (E) 7 3.4 manufacturer's declared value (MDV) value declared by the manufacturer accompanied by a declared tolerance 4 Product characteristics and test methods 4.1 General Rigid underlays based on wood, fibre cement or made of corrugated bitumen sheets have to meet the requirements as given in 4.3 and shall be tested accordingly. Rigid underlays made of other materials shall be grouped into one of the different materials (wood-based, fibre cement, corrugated bitumen sheets) and all tests shall be carried out according to the respective material group. Factory production control and verification of manufacturer's stated values shall be carried out in accordance with Annex A. 4.2 Dimensions and tolerances (dimensional variation) The tolerances on dimensions of the products described in this European Standard are to be classified as follows:  Type OL: rigid underlays laid overlapping;  Type IL: rigid underlays laid interlocking. The tolerances for wood-based panels, fibre cement flat sheets and the corrugated bitumen sheets for type OL shall comply with the relevant applicable product standards as listed in Clause 2. Dimensions and tolerances of wood-based panels shall be determined in accordance with EN 324-1 and EN 324-2. Dimensions and tolerances of fibre cement flat sheets shall be determined in accordance with EN 12467. Dimensions and tolerances of corrugated bitumen sheets shall be determined in accordance with EN 534. If a product is not based on one of these materials, the tolerances for type OL are given in Table 1. For all products type IL the values of tolerances are given in Table 2.



EN 14964:2006 (E) 8
Table 1 — Type OL: Tolerances for rigid underlays laid overlapping Characteristic Tolerance Length ± 5 mm Width ± 1 % Straightness or squareness a Deviation: 4 mm/m length Flat products ± 1 mm Thickness Corrugated products ± 10 % Height of corrugations ± 1 % Pitch of corrugations ± 1 % a
Either one may be declared. Table 2 — Type IL: Tolerances for rigid underlays laid interlocking Characteristic Tolerance Length ± 5 mm Width ± 3 mm, max 1/3 of interlocking Thickness + 3 mm/ -1 mm Squareness 2 mm/m Straightness 1,5 mm/m, max. 1/3 of interlocking
4.3 Application-related characteristics 4.3.1 Mechanical resistance 4.3.1.1 General The mechanical resistance of products used as rigid underlays (under the scope of this European Standard) is characterized through bending strength. 4.3.1.2 Corrugated bitumen sheets The bending under downward load shall be determined in accordance with EN 534:2006, 7.2.1, with the following modifications:  the distance between the tubes (Figure 8/key 2) shall be 400 mm instead of 620 mm;  the distance between the three supports (Figure 8/key 5) shall be modified in the proportion of 400/620: e.g. 210 mm instead of 325 mm, 200 mm instead of 310 mm;



EN 14964:2006 (E) 9  instead of square tube (Figure 8/key 2), rectangular tubes of 100 mm width and 40 mm height shall be used;  the minimum load for a deflection of 1/200 of a span of 400 mm shall be 500 N/m2. 4.3.1.3 Fibre cement products The bending strength shall be determined in accordance with EN 12467. The product shall comply with at least category D as given in EN 12467:2004. Un-pressed sheets have to fulfil at least class 3, pressed sheets at least class 4 according to EN 12467:2004. 4.3.1.4 Wood based panels The bending strength for wood based panels (required to be at least suitable for general purpose uses in humid conditions) shall be at least the limit value for the following boards:  HB.H according to EN 622-2;  MBL.H according to EN 622-3;  MBH.H according to EN 622-3;  SB.H according to EN 622-4;  MDF.RWH according to EN 622-5;  Laminated veneer lumber LVL/2 according to EN 14279;  OSB/3 and OSB/4 according to EN 300;  Particleboard P5 according to EN 312;  Plywood C2 according to EN 636. 4.3.1.5 Other materials The mechanical resistance of products for use as rigid underlays shall be determined in accordance with the product standards of corrugated bitumen sheets, fibre cement sheets or wood based panels and all tests shall be carried out according to the respective material group. 4.3.2 Reaction to fire Reaction to fire shall be determined when subject to regulatory requirements, and may be determined when not subject to such requirements. Except for wood-based panels, where the manufacturer wishes to declare reaction to fire performance (e.g. where the product is subject to regulatory requirements), the product shall be tested and classified in accordance with EN 13501-1:2002, Table 1. For wood-based panels, the reaction to fire performance shall be tested and classified according to
EN 13501-1:2002, Table 1 or taken from EN 13986:2004, Table 8 (CWFT). Where the test method requires it, products shall be mounted and fixed in a manner representative of their intended end use conditions.



EN 14964:2006 (E) 10 4.3.3 Water impermeability 4.3.3.1 Corrugated bitumen sheets Water impermeability shall be determined according to EN 534. 4.3.3.2 Fibre cement products Water impermeability shall be determined in accordance with EN 12467. The evaluation shall be done in accordance with EN 12467.
Products shall meet the requirements for category B. 4.3.3.3 Wood-based panels Water impermeability shall be determined in accordance with EN 12467:2004, 7.3.3 (20 mm water column, test period 24 h, 3 test specimens), with the modification that for wood-based panels:  the diameter of the testing frame shall be ≥ 100 mm and  the test specimen shall be conditioned at the climate of (23 ± 5) °C and (50 ± 10) %. Evaluation shall be carried out in accordance with EN 12467. 4.3.3.4 Other materials The water impermeability of products for use as rigid underlays shall be determined in accordance with the product standards of corrugated bitumen sheets, fibre cement sheets or wood-based panels and all tests shall be carried out according to the respective material group. 4.3.4 Water vapour permeability For wood-based panels and corrugated bitumen sheets the declaration of values of water vapour permeability may be made by reference to standardised values of EN 12524:2000, Table 1 (wet cup) or shall be declared by test results according to EN ISO 12572, climate C. For fibre cement products the values of water vapour permeability shall be declared by test results according to EN ISO 12572, climate C. If the product is tested according to EN ISO 12572, climate C, the results shall lie within the declared tolerance of the manufacturer's declared value. 4.3.5 Durability 4.3.5.1 Corrugated bitumen sheets Durability shall be determined according to EN 534:2006, 5.4.2, water impermeability after freeze/thaw ageing, category S. 4.3.5.2 Fibre cement products Durability shall be determined according EN 12467. Bending strength shall be measured in ambient conditions before and after conditioning for warm water, soak-dry and freeze-thaw for category D. Evaluation shall be carried out in accordance with EN 12467.



EN 14964:2006 (E) 11 4.3.5.3 Wood-based panels Durability shall comply at least with the limit values for moisture resistance for wood based panels used for general purpose in humid conditions for the relevant board types:  HB.H according to EN 622-2;  MBL.H according to EN 622-3;  MBH.H according to EN 622-3;  SB.H according to EN 622-4;  MDF.RWH according to EN 622-5;  Laminated veneer lumber LVL/2 according to EN 14279;  OSB/3 and OSB/4 according to EN 300;  Particleboard P5 according to EN 312;  Plywood C2 according to EN 636. 4.3.5.4 Other materials The durability of products for use as rigid underlays shall be determined in accordance with the product standard of corrugated bitumen sheets, fibre cement sheets or wo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.