SIST EN 10246-16:2000

Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections

This Part of EN 10246 specifies requirements for the ultrasonic testing of the area adjacent to the weld of welded steel tubes for the detection of laminar imperfections.  The standard specifies acceptance levels and calibration procedures. Note: This inspection may alternatively, in accordance with EN 10246-15, be carried out on longitudinal edges of strip/plate (using in the manufacture of welded tubes) in the flat form prior to seam welding.

Zerstörungsfreie Prüfung von Stahlrohren - Teil 16: Automatische Ultraschallprüfung des an die Schweißnaht angrenzenden Bereiches geschweißter Stahlrohre zum Nachweis von Dopplungen

Dieser Teil der EN 10246 legt die Anforderungen an die automatische Ultraschallprüfung des an die Schweißnaht angrenzenden Bereiches geschweißter Rohre zum Nachweis von Dopplungen fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen.

Essais non destructifs sur des tubes en acier - Partie 16: Contrôle automatique par ultrasons pour la détection des dédoublures dans la zone soudée des tubes en acier soudés

La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle par ultrasons des zones adjacentes au cordon de soudure pour la détection des dédoublures. Note: Ce contrôle peut également etre effectué sur les rives longitudinales de la bande/plaque (utilisées pour la fabrication de tubes soudés) sous forme plate, avant le soudage, conformément a l'EN 10246-15.

Neporušitveno preskušanje jeklenih cevi - 16. del: Ugotavljanje laminarnih napak ob varu jeklenih cevi z avtomatsko ultrazvočno preiskavo

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2000
• Withdrawal Date: 26-Sep-2011
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 25.160.40 - Welded joints and welds
• ICS: 77.040.20 - Non-destructive testing of metals
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Sep-2011
• Due Date: 15-Oct-2011
• Completion Date: 27-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10246-16:2000 - Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections

Relations

• Replaced By: SIST EN ISO 10893-8:2011 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
• Effective Date: 01-Nov-2011
• Replaced By: SIST EN ISO 10893-8:2011 - Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Stahlrohren - Teil 16: Automatische Ultraschallprüfung des an die Schweißnaht angrenzenden Bereiches geschweißter Stahlrohre zum Nachweis von DopplungenEssais non destructifs sur des tubes en acier - Partie 16: Contrôle automatique par ultrasons pour la détection des dédoublures dans la zone soudée des tubes en acier soudésNon-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imper
...