iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13215:2001

(Main)

Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

This European Standard specifies the rating conditions, tolerances and presentation of performance data for single-stage condensing units for refrigeration with compressors of the positive-displacement type. This is required so that a comparison of different condensing units can be made. The performance data relate to the refrigerating capacity and power absorbed, they include correction factors and refer to full load operation of the condensing unit.

Verflüssigungssätze für die Kälteanwendung - Nennbedingungen, Toleranzen und Darstellung von Leistungsdaten des Herstellers

Diese Europäische Norm legt die Nennbedingungen, Toleranzen und die Darstellung der Leistungsdaten für einstufige Verflüssigungssätze für die Kälteanwendung mit Verdichtern des Verdrängertyps fest. Dies ist notwendig, damit ein Vergleich von unterschiedlichen Verflüssigungssätzen durchgeführt werden kann. Die Leistungsdaten beziehen sich auf die Kälteleistung und die Leistungsaufnahme, sie schließen Korrekturfaktoren ein und gelten für den Vollastbetrieb des Verflüssigungssatzes.

Unités de condensation pour la réfrigération - Conditions de détermination des caractéristiques, tolérances et présentation des performances du fabricant

La présente norme européenne spécifie les conditions de détermination des caractéristiques, les tolérances et les performances, et la façon de les présenter, des unités de condensation pour la réfrigération mono-étage avec compresseurs de type volumétrique. Ceci est nécessaire afin de permettre une comparaison entre différentes unités de condensation.  Les performances se rapportent a la puissance frigorifique et a la puissance absorbée, elles comprennent des facteurs de correction et se réferent au fonctionnement a pleine charge des unités de condensation.

Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

General Information

Status
Withdrawn
Publication Date
31-May-2001
Withdrawal Date
07-Dec-2016
ICS
27.200 - Refrigerating technology
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Dec-2016
Due Date
31-Dec-2016
Completion Date
08-Dec-2016
Ref Project
EN 13215:2000 - Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data

Relations

Replaced By
SIST EN 13215:2017 - Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data
Effective Date
01-Feb-2017
Replaced By
SIST EN 13215:2017 - Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data
Effective Date
08-Jun-2022

Buy Standard

EN 13215:2001EN 13215:2001
PreviousNext
Standard
EN 13215:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance dataVerflüssigungssätze für die Kälteanwendung - Nennbedingungen, Toleranzen und Darstellung von Leistungsdaten des HerstellersUnités de condensation pour la réfrigération - Conditions de détermination des caractéristiques, tolérances et présentation des perform
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16440-2:2023(Main)
Testing methodologies for refrigerating devices for insulated means of transport - Part 2: Eutectic cooling devices
EN 16440-2:2023

This European standard applies to eutectic cooling devices which are intended to be used with insulated transport equipment.
The following applications are covered:
•   Eutectic cooling devices with or without compressor /condenser unit intended to be installed into
insulated means of transport (e.g. lorries, trailers, swap bodies, other transport containers and
wagons). Charging of the eutectic elements from the liquid to the solid phase may be performed
either by a compressor/condenser unit mounted onto the vehicle or cooled by a stationary direct or indirect system. The eutectic cooling devices are equipped, if relevant, with necessary components for the charging, transmission, cooling and/or with temperature control devices. The eutectic elements can be fitted with or without fans.
•   Eutectic cooling devices with independent eutectic elements which have to be charged using external
means.
This standard specifies the testing methodologies.
This standard is only applicable for mono-temperature eutectic cooling devices. This standard does not provide any safety requirements.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22712:2023(Main)
Refrigerating systems and heat pumps - Competence of personnel (ISO 22712:2023)
EN ISO 22712:2023

This European Standard defines the activities related to refrigerating circuits and the associated competence profiles and establishes procedures for assessing the competence of persons who carry out these activities.
NOTE    As a refrigerating circuit is considered not to incorporate electrical and electronic systems, activities in this area are not part of this standard. For competences on electrical and electronic systems, it is recommended to refer to national regulations or appropriate European or national standards. This European Standard does not apply to persons carrying out work on self contained refrigerating systems as defined in EN 378-1 from the initial design of the product to the complete manufacture of the product, provided the process is controlled and the methods used are checked by an organisation or individual, responsible for the compliance with statutory requirements on health, safety and environment.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21922:2022(Main)
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
EN ISO 21922:2021

This European Standard specifies safety requirements, safety factors, test methods, test pressures used and marking of refrigerating valves and other components with similar bodies, hereinafter called valves, for use in refrigerating systems.
It describes the procedure to be followed when designing (by calculation or by an experimental design method) valve parts subjected to pressure as well as the criteria to be used in the selection of materials.
The standard describes methods by which reduced impact values at low temperatures may be taken into account in a safe manner.
This standard applies to the design of bodies and bonnets for pressure relief devices, including bursting disc devices, with respect to pressure containment but it does not apply to any other aspects of the design or application of pressure relief devices.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17432:2021(Main)
Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
EN 17432:2021

This document defines classification criteria, test conditions and test procedures for performance testing of packaged refrigerating units for stationary cold room applications. This includes ductless units for cold storage applications at medium temperatures (MT) and low temperatures (LT) in either compact or split designs, fitted with electrically driven compressors, which work according to the vapour compression cycle.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17606:2021(Main)
Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards
CEN/TS 17606:2021

This TS provides technical specifications and guidance for the installation of refrigeration, air conditioning and heat pump equipment This document provides technical information for the installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, in particular from class A3, complementing existing standards. The term “refrigerating system” used in this document includes air conditioners and heat pumps.
Refrigerants from toxicity class B are excluded from this scope.
This document includes risk mitigation measures not yet addressed in existing standards for specific refrigerant classes, or not fully reflecting the state of the art, and establishes complementary technical specifications related to the installation of equipment.
The following aspects are considered:
-   explosive atmosphere workplace and equipment;
NOTE   Further information can be found in Directive 99/92/EC (ATEX Workplace Directive) and Directive 2014/34/EU (ATEX Equipment Directive).
-   design and structural specifications for the installation site;
-   marking and labelling of equipment parts and installation site;
-   good practice for installing equipment, including tools and personal protection;
-   risk mitigation methods and related refrigerant charge limits;
-   risk assessments;
-   competence of personnel;
-   safety testing of systems and equipment.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17607:2021(Main)
Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards
CEN/TS 17607:2021

This document provides technical specifications for the operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, in particular from class A3, complementing existing standards.
Refrigerants from toxicity class B are excluded from this scope.
This document includes risk mitigation measures not yet addressed in existing standards for specific refrigerant classes, or not fully reflecting the state of the art, and establishes complementary technical specifications for the operation, servicing, maintenance, repair and decommissioning, .
The following aspects are considered:
-   explosive atmosphere workplace and equipment;
NOTE   Further information can be found in Directive 99/92/EC (ATEX Workplace Directive) and Directive 2014/34/EU (ATEX Equipment Directive).
-   good practice for the operation, servicing, maintenance, repair and decommissioning, including tools and personal protection;
-   risk mitigation methods;
-   risk assessments;
-   competence of personnel;
-   health and safety of personnel;
-   location of the equipment.

  • Technical specification
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 378-3:2017+A1:2021(Main)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
EN 378-3:2016+A1:2020

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity.
Systems using refrigerants other than those listed in of !EN 378 1:2016+A1:2020", Annex E are not covered by this standard.
This standard does not apply to goods in storage.
This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 378-1:2017+A1:2021(Main)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
EN 378-1:2016+A1:2020

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This part of EN 378 specifies the classification and selection criteria applicable to refrigerating systems. These classification and selection criteria are used in parts 2, 3 and 4.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity;
Systems using refrigerants other than those listed in Annex E of this European Standard are not covered by this standard.
Annex C specifies how to determine the amount of refrigerant permitted in a given space, which when exceeded, requires additional protective measures to reduce the risk.
Annex E specifies criteria for safety and environmental considerations of different refrigerants used in refrigeration and air conditioning.
This standard is not applicable to refrigerating systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.
Product family standards dealing with the safety of refrigerating systems takes precedence over horizontal and generic standards covering the same subject.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14624:2020(Main)
Performance of portable locating leak detectors and of fixed gas detectors for all refrigerants
EN 14624:2020

This document specifies the requirements for portable locating leak detectors and fixed gas detectors for all refrigerants.
Locating detectors used in factories for manufacturing processes are not included in the Scope of prEN 14624.
1.1   Product application:
This document applies to different applications and environments such as plant and machine rooms, production rooms, cold rooms, supermarkets, occupied spaces like offices and hotels.
1.2   Product performance:
This document specifies minimum requirements for sensitivity, operating range, response time, environmental conditions and cross sensitivity from interference gases.
1.3   Product installation:
This document gives guidance of suitable technology, location of detection points, interconnection with secondary equipment (e.g. initiation of mechanical ventilation, personnel warning, equipment shutdown).
1.4   Service and maintenance:
This document gives guidance for service and maintenance: Sensors and mechanical equipment have a limited operating life and require regular performance verification to ensure conformity.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14276-1:2020(Main)
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
EN 14276-1:2020

This European Standard specifies the requirements for material, design, manufacturing, testing and documentation for stationary pressure vessels intended for use in refrigerating systems and heat pumps. These systems are referenced in this standard as refrigerating systems as defined in EN 378-1.
This European Standard applies to vessels, including welded or brazed attachments up to and including the nozzle flanges, screwed, welded or brazed connectors, or to the edge to be welded or brazed at the first circumferential joint connecting piping or other elements.
This European Standard applies to pressure vessels with an internal pressure down to – 1 bar, to account for the evacuation of the vessel prior to charging with refrigerant.
This European Standard applies to both the mechanical loading conditions and thermal conditions as defined in EN 13445-3 associated with refrigerating systems. It applies to pressure vessels subject to the maximum allowable temperatures for which nominal design stresses for materials are derived using EN 13445-2 and EN 13445-3 or as specified in this standard. In addition, vessels designed to this standard should have a maximum allowable temperature not exceeding 150 °C and a maximum design pressure not exceeding 160 bars. Outside of these limits, it is important that EN 13445 be used for the design, construction and inspection of the vessel. Under these circumstances, it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard, also be taken into account.
It is important that pressure vessels used in refrigerating systems and heat pumps of category less than II as de-fined in Annex H comply with other relevant clauses of EN 378-2 for vessels.
This European Standard applies to pressure vessels where the main pressure bearing parts are manufactured from metallic ductile materials as defined in Clause 4 and Annex I of this standard.
This European Standard does not apply to vessels of the following types:
-   vessels of riveted construction;
-   multi-layered, autofrettaged or prestressed vessels;
-   vessels directly heated by a flame;
-   « roll bond » heat exchangers.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day