Fixed firefighting systems - Automatic sprinkler systems - Part 1: Design, installation and maintenance

This European standard specifies requirements for the design, installation and maintenance of new automatic sprinkler systems as well as any addition, extension, repair or other modification of existing automatic sprinkler systems.
In certain countries specific national regulations apply and take precedence over this European Standard. Users of this European Standard are advised to inform themselves of the applicability or non-applicability for this European Standard by their national responsible authorities.

Ortsfeste Brandbekämpfungsanlagen - Automatische Sprinkleranlagen - Planung, Installation und Instandhaltung

Dieses Dokument legt Anforderungen an die Planung, Installation und Instandhaltung neuer automatischer Sprinkleranlagen sowie an alle Ergänzungen, Erweiterungen, Reparaturen oder sonstige Änderungen bestehender automatischer Sprinkleranlagen fest.
Dieses Dokument deckt nicht alle gesetzlichen Anforderungen ab. In bestimmten Ländern gelten besondere nationale Vorschriften, die gegenüber diesem Dokument Vorrang haben. Anwendern dieses Dokuments wird empfohlen, sich selbst über die Anwendbarkeit oder Nichtanwendbarkeit dieses Dokuments bei ihren nationalen zuständigen Stellen zu informieren.

Installations fixes de lutte contre l‘incendie - Systèmes d’extinction automatique du type sprinkleur - Conception, installation et maintenance

Le présent document spécifie les exigences applicables à la conception, l'installation et la maintenance de nouveaux systèmes d'extinction automatique de type sprinkleur, ainsi que de tout(e) ajout, extension, réparation ou autre modification de systèmes d'extinction automatique de type sprinkleur existants.
Le présent document ne traite pas des exigences légales. Dans certains pays, des réglementations nationales spécifiques s'appliquent et prennent le pas sur le présent document. Il est conseillé aux utilisateurs du présent document de s'informer auprès des autorités nationales responsables de l'applicabilité ou de la non-applicabilité du présent document.

Vgrajene naprave za gašenje - Avtomatski sprinklerski sistemi - 1. del: Projektiranje, vgradnja in vzdrževanje

General Information

Status
Not Published
Public Enquiry End Date
27-Feb-2022
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
04-Apr-2024
Due Date
09-Apr-2024
Completion Date
04-Apr-2024

Relations

Buy Standard

Draft
prEN 12845-1:2022
English language
305 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12845-1:2022
01-februar-2022
Vgrajene naprave za gašenje - Avtomatski sprinklerski sistemi - 1. del:
Projektiranje, vgradnja in vzdrževanje
Fixed firefighting systems - Automatic sprinkler systems - Part 1: Design, installation and
maintenance
Ortsfeste Brandbekämpfungsanlagen - Automatische Sprinkleranlagen - Planung,
Installation und Instandhaltung
Installations fixes de lutte contre lincendie - Systèmes dextinction automatique du type
sprinkleur - Conception, installation et maintenance
Ta slovenski standard je istoveten z: prEN 12845-1
ICS:
13.220.10 Gašenje požara Fire-fighting
oSIST prEN 12845-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12845-1:2022

---------------------- Page: 2 ----------------------
oSIST prEN 12845-1:2022


DRAFT
EUROPEAN STANDARD
prEN 12845-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2021
ICS 13.220.20 Will supersede EN 12845:2015+A1:2019
English Version

Fixed firefighting systems - Automatic sprinkler systems -
Part 1: Design, installation and maintenance
Installations fixes de lutte contre l¿incendie - Systèmes Ortsfeste Brandbekämpfungsanlagen - Automatische
d¿extinction automatique du type sprinkleur - Sprinkleranlagen - Planung, Installation und
Conception, installation et maintenance Instandhaltung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 191.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12845-1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12845-1:2022
prEN 12845-1:2021 (E)
Contents Page

European foreword . 6
Introduction . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 13
3.1 Terms and definition . 13
3.2 Symbols and abbreviated terms . 31
4 Contract planning and documentation . 32
4.1 General . 32
4.2 Design stage .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.