iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 861:2008/AC:2008

(Corrigendum)

Safety of woodworking machines - Surface planing and thicknessing machines

Safety of woodworking machines - Surface planing and thicknessing machines

This document deals with the significant hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable surface planing and thicknessing machines with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planning mode) and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The cutterblock is fixed in position and for thicknessing an integrated feed is provided. The machines are designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer.

Sicherheit von Holzbearbeitungsmaschinen - Kombinierte Abricht- und Dickenhobelmaschinen

Sécurité des machines pour le travail du bois - Machines combinées à raboter et à dégauchir

Varnost lesnoobdelovalnih strojev - Kombinirani in debelinski skobeljniki

General Information

Status
Withdrawn
Publication Date
10-Nov-2008
Withdrawal Date
19-Aug-2009
ICS
25.080.25 - Planing machines
79.120.10 - Woodworking machines
Technical Committee
VSN - Safety of machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Aug-2009
Due Date
12-Sep-2009
Completion Date
20-Aug-2009
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 861:2007/AC:2008 - Safety of woodworking machines - Surface planing and thicknessing machines

Relations

Replaced By
SIST EN 861:2008+A1:2009 - Safety of woodworking machines - Surface planing and thicknessing machines
Effective Date
01-Oct-2009
Corrects
SIST EN 861:2008 - Safety of woodworking machines - Surface planing and thicknessing machines
Effective Date
01-Dec-2008

Buy Standard

EN 861:2008/AC:2008EN 861:2008/AC:2008
PreviousNext
Corrigendum
EN 861:2008/AC:2008
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost lesnoobdelovalnih strojev - Kombinirani in debelinski skobeljnikiSicherheit von Holzbearbeitungsmaschinen - Kombinierte Abricht- und DickenhobelmaschinenSécurité des machines pour le travail du bois - Machines combinées à raboter et à dégauchirSafety of woodworking machines - Surface planing and thicknessing machines79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.25Planing machinesICS:Ta slovenski standard je istoveten z:EN 861:2007/AC:2008SIST EN 861:2008/AC:2008en01-december-2008SIST EN 861:2008/AC:2008SLOVENSKI
STANDARD



SIST EN 861:2008/AC:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 861:2007/ACOctober 2008Octobre 2008Oktober 2008ICS 79.120.10English versionVersion FrançaiseDeutsche FassungSafety of woodworking machines - Surface planing and thicknessingmachinesSécurité des machines pour le travail dubois - Machines combinées à raboter et àdégauchirSicherheit von Holzbearbeitungsmaschinen- Kombinierte Abricht- undDickenhobelmaschinenThis corrigendum becomes effective on 29 October 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19085-7:2020(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)
EN ISO 19085-7:2019

This document deals with all significant hazards, hazardous situation and events as listed in Clause 4 relevant
to stationary and displaceable
- surface planning machines,
- thickness planing machines,
- combined surface/thickness planing machines
with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planing mode)
and with manual loading and unloading of the work-piece.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 860:2009+A1:2009/kFprA2:2012(Amendment)
Safety of woodworking machines - One side thickness planing machines
EN 860:2007+A1:2009/FprA2

This document specifies all significant hazards, hazardous situations and events as listed in Clause 4, relevant to stationary and displaceable one side thickness planing machines fitted with an integrated feed and with cutterblock fixed in position and manual loading and unloading of the work-piece, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard and plywood when they are used as
intended and under the conditions foreseen by the manufacturer.
This document does not apply to machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand; hand held planers or any adaptation permitting their use in a different mode, i.e. bench mounting; thickness planing machines where the cutterblock is adjustable for depth of cut setting.
This document is not applicable to one side thickness planning machines fitted with an integrated feed and with cutterblock fixed in position which are manufactured before the date of its publication as EN.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 861:2008+A1:2009/FprA2:2012(Amendment)
Safety of woodworking machines - Surface planing and thicknessing machines
EN 861:2007+A1:2009/FprA2

This document specifies all significant hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable surface planing and thicknessing machines with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planning mode) and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The cutterblock is fixed in position and for thicknessing an integrated feed is provided. The machines are designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer. This document does not deal with any hazards which result from the attachment of an optional mortising unit. These hazards are covered by prEN 940:2007. This document does not apply to machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; surface planing and thicknessing machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode; machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units; machines where surfacing and thicknessing can be performed at the same time. This document is not applicable to surface planing and thicknessing machines which are manufactured before the date of its publication as EN.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 19085-7:2022(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO/DIS 19085-7:2022)
prEN ISO 19085-7

This document specifies the safety requirements and measures for
— surface planing machines, also called jointers,
— thickness planing machines, also called planers or single surface planers,
— combined surface/thickness planing machines
with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece and capable of continuous production use, hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a) machines with more than one cutter block;
b) machines with a mortising unit driven by a separate motor;
c) machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;
d) machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;
e) machines where surface planing and thickness planing can be performed on the same section of the cutter block at the same time;
f) machines intended for use in potentially explosive atmosphere;
g) machines manufactured prior to the date of its publication as an international standard.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 861:2008/kprA1:2009(Amendment)
Safety of woodworking machines - Surface planing and thicknessing machines
EN 861:2007/prA1
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 859:2009/kFprA1:2009(Amendment)
Safety of woodworking machines - Hand fed surface planing machines
EN 859:2007/FprA1
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 859:2009+A1:2010/kFprA2:2012(Amendment)
Safety of woodworking machines - Hand fed surface planing machines
EN 859:2007+A1:2009/FprA2

This document specifies all significant hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable hand fed surface planing machines fitted or not with demountable power feed unit hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer.
This document does not apply to machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand; hand held planers or any adaptation permitting their use in a different mode, i.e. bench mounting.
This document is not applicable to hand fed surface planing machines which are manufactured before the date of its publication as EN.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 860:2009/kprA1:2009(Amendment)
Safety of woodworking machines - One side thickness planing machines
EN 860:2007/prA1
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-7:2020(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)
EN ISO 19085-7:2019

This document deals with all significant hazards, hazardous situation and events as listed in Clause 4 relevant
to stationary and displaceable
- surface planning machines,
- thickness planing machines,
- combined surface/thickness planing machines
with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planing mode)
and with manual loading and unloading of the work-piece.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 19085-7:2022(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO/DIS 19085-7:2022)
prEN ISO 19085-7

This document specifies the safety requirements and measures for
— surface planing machines, also called jointers,
— thickness planing machines, also called planers or single surface planers,
— combined surface/thickness planing machines
with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece and capable of continuous production use, hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a) machines with more than one cutter block;
b) machines with a mortising unit driven by a separate motor;
c) machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;
d) machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;
e) machines where surface planing and thickness planing can be performed on the same section of the cutter block at the same time;
f) machines intended for use in potentially explosive atmosphere;
g) machines manufactured prior to the date of its publication as an international standard.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day