iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 62040-1:2019/A1:2024

(Amendment)

Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-1:2017/A1:2021)

Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-1:2017/A1:2021)

No scope available

Unterbrechungsfreie Stromversorgungssysteme (USV) - Teil 1: Sicherheitsanforderungen (IEC 62040-1:2017/A1:2021)

Alimentations sans interruption (ASI) - Partie 1: Exigences de sécurité (IEC 62040-1:2017/A1:2021)

Sistemi z neprekinjenim napajanjem (UPS) - 1. del: Varnostne zahteve - Dodatek A1 (IEC 62040-1:2017/A1:2021)

General Information

Status
Published
Public Enquiry End Date
10-Sep-2020
Publication Date
11-Apr-2024
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
Technical Committee
MOV - Measuring equipment for electromagnetic quantities
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Oct-2023
Due Date
29-Dec-2023
Completion Date
12-Apr-2024
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
EN IEC 62040-1:2019/A1:2023 - Uninterruptible power systems (UPS) - Part 1: Safety requirements

Relations

Amends
SIST EN IEC 62040-1:2019 - Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-1:2017)
Effective Date
07-Jan-2020

Buy Standard

EN IEC 62040-1:2019/A1:2024EN IEC 62040-1:2019/A1:2024
PreviousNext
Amendment
EN IEC 62040-1:2019/A1:2024
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN IEC 62040-1:2019/oprA1:2020EN IEC 62040-1:2019/oprA1:2020
PreviousNext
Draft
EN IEC 62040-1:2019/oprA1:2020
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62040-1:2019/A1:2024
01-maj-2024
Sistemi z neprekinjenim napajanjem (UPS) - 1. del: Varnostne zahteve - Dodatek
A1 (IEC 62040-1:2017/A1:2021)
Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-
1:2017/A1:2021)
Unterbrechungsfreie Stromversorgungssysteme (USV) - Teil 1:
Sicherheitsanforderungen (IEC 62040-1:2017/A1:2021)
Alimentations sans interruption (ASI) - Partie 1: Exigences de sécurité (IEC 62040-
1:2017/A1:2021)
Ta slovenski standard je istoveten z: EN IEC 62040-1:2019/A1:2023
ICS:
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
SIST EN IEC 62040-1:2019/A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62040-1:2019/A1:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 62040-1:2019/A1:2024


EUROPEAN STANDARD EN IEC 62040-1:2019/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM October 2023
ICS 29.200

English Version
Uninterruptible power systems (UPS) - Part 1: Safety
requirements
(IEC 62040-1:2017/A1:2021)
Alimentations sans interruption (ASI) - Partie 1 : Exigences Unterbrechungsfreie Stromversorgungssysteme (USV) -
de sécurité Teil 1: Sicherheitsanforderungen
(IEC 62040-1:2017/A1:2021) (IEC 62040-1:2017/A1:2021)
This amendment A1 modifies the European Standard EN IEC 62040-1:2019; it was approved by CENELEC on 2021-06-24. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62040-1:2019/A1:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62040-1:2019/A1:2024
EN IEC 62040-1:2019/A1:2023 (E)
European foreword
The text of document 22H/269/FDIS, future IEC 62040-1/A1, prepared by SC 22H "Uninterruptible
power systems (UPS)" of IEC/TC 22 "Power electronic systems and equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62040-1:2019/A1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-04-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-10-20
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62040-1:2017/A1:2021 was approved by CENELEC as a
European Standard without any modification.

2

---------------------- Page: 4 ----------------------
SIST EN IEC 62040-1:2019/A1:2024




IEC 62040-1

®


Edition 2.0 2021-05




INTERNATIONAL



STANDARD














AMENDMENT 1





Uninterruptible power systems (UPS) –

Part 1: Safety requirements


























INTERNATIONAL

ELECTROTECHNICAL

COMMISSION






ICS 29.200 ISBN 978-2-8322-9792-6




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 5 --------------------
...

SLOVENSKI STANDARD
SIST EN IEC 62040-1:2019/oprA1:2020
01-september-2020
Sistemi z neprekinjenim napajanjem (UPS) - 1. del: Varnostne zahteve
Uninterruptible power systems (UPS) - Part 1: Safety requirements
Unterbrechungsfreie Stromversorgungssysteme (USV) - Teil 1:
Sicherheitsanforderungen
Alimentations sans interruption (ASI) - Partie 1: Exigences de sécurité
Ta slovenski standard je istoveten z: EN IEC 62040-1:2019/prA1:2020
ICS:
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
SIST EN IEC 62040-1:2019/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62040-1:2019/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62040-1:2019/oprA1:2020
22H/262/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62040-1/AMD1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-06-19 2020-09-11
SUPERSEDES DOCUMENTS:
22H/259/CD, 22H/261/CC

IEC SC 22H : UNINTERRUPTIBLE POWER SYSTEMS (UPS)
SECRETARIAT: SECRETARY:
France Mr Eric Brun
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.

TITLE:
Uninterruptible power systems (UPS) - Part 1: Safety requirements

PROPOSED STABILITY DATE: 2023

NOTE FROM TC/SC OFFICERS:


Copyright © 2020 International Electrotec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61800-5-3:2024(Main)
Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders (IEC 61800-5-3:2021)
EN IEC 61800-5-3:2023

This part of IEC 61800, which is a product standard, specifies requirements and makes
recommendations for the design and development, integration and validation of safety-related
encoder (Encoder(SR)) in terms of their functional safety considerations, electrical safety and
environmental conditions. It applies to Encoder(SR), being sensors as part of a PDS(SR).
NOTE 1 The term "integration" refers to the Encoder(SR) itself, not to its incorporation into the safety-related
application.
This document can also be referred to and used for Encoder(SR) in any other safety-related
application, for example safety-related position monitoring.
NOTE 2 This document specifies only complementary functional safety, electrical safety and environmental condition
requirements that are not clearly provided by other parts of the IEC 61800 series.
This document is applicable where functional safety of an encoder is claimed and the
Encoder(SR) is operating mainly in the high demand or continuous mode.
NOTE 3 While low demand mode operation is possible for an Encoder(SR), this document concentrates on high
demand and continuous mode. Safety sub-functions implemented for high demand or continuous mode can also be
used in low demand mode. Requirements for low demand mode are given in IEC 61508 (all parts) [2]. Some guidance
for the estimation of average probability of dangerous failure on demand (PFDavg) value is provided in
IEC 61800-5-2:2016, Annex F.
The requirements of IEC 61800-5-2:2016 for PDS(SR) apply to Encoder(SR) as applicable. This
document includes additional or different requirements for Encoder(SR). It sets out safetyrelated
considerations of Encoder(SR) in terms of the framework of IEC 61508 (all parts), and
introduces requirements for Encoder(SR) as subsystems of a safety-related system. It is
intended to facilitate the realisation of the electrical/electronic/programmable electronic
(E/E/PE) and mechanical parts of an Encoder(SR) in relation to the safety performance of safety
sub-function(s) of an Encoder(SR).
Manufacturers and suppliers of Encoder(SR) will, by using the normative requirements of this
document, indicate to users (system integrator, original equipment manufacturer) the safety
performance of the Encoder(SR). This will facilitate the incorporation of Encoder(SR) into
safety-related control systems using the principles of IEC 61508 (all parts), and possibly its
specific sector implementations (for example IEC 61511 (all parts) [3], IEC 61513 [4],
IEC 62061 [5] or ISO 13849-1 and ISO 13849-2 (see Clause 2).
By applying the requirements from this document, the corresponding requirements of
IEC 61508 (all parts) that are necessary for an Encoder(SR) are fulfilled.
This document does not specify requirements for:
• the functional properties of an Encoder(SR) without any safety relevance;
• the hazard and risk analysis of a particular application;
• the identification of safety sub-functions for that application;
• the initial allocation of SILs to those safety sub-functions;
• the driven equipment except for interface arrangements;
• secondary hazards (for example from failure in a production or manufacturing process);
• the Encoder(SR) manufacturing process;
• the validity of signals and commands to the Encoder(SR); and
• security aspects (e.g. cyber security or Encoder(SR) security of access).
NOTE 4 The functional safety requirements of an Encoder(SR) are dependent on the application, and can be
considered as a part of the overall risk assessment of the installation. Where the supplier of the Encoder(SR) is not
responsible for the driven equipment, the installation designer is responsible for the risk assessment, and for
specifying the functional and safety integrity requirements of the Encoder(SR).
This document applies to Encoder(SR) implementing safety sub-functions with a SIL not greater
than SIL 3.
This document provides additional information for Encoder(SR) claiming

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61800-5-1:2024(Main)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy (IEC 61800-5-1:2022 + COR1:2023)
EN IEC 61800-5-1:2023

This part of IEC 61800 specifies requirements for adjustable speed electrical power drive
systems (PDS) or their elements, with respect to electrical, thermal, fire, mechanical, energy
and other relevant hazards. It does not cover the driven equipment except for interface
requirements. It applies to adjustable speed electrical PDS which include the power conversion,
basic drive module (BDM)/complete drive module (CDM) control, and a motor or motors.
Excluded are traction and electric vehicle BDM/CDM.
It applies to low-voltage adjustable speed electrical PDS intended to feed a motor or motors
from a BDM/CDM connected to phase-to-phase voltages of up to and including 1,0 kV AC
(50 Hz or 60 Hz) and up to and including 1,5 kV DC.
It also applies to high-voltage adjustable speed electrical PDS intended to feed a motor or
motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 35 kV
AC (50 Hz or 60 Hz) and up to and including 52 kV DC.
NOTE 1 At the time of publication of this document, the technical upper voltage limit for DC motors is 2,25 kV DC.
NOTE 2 Above voltage and frequency limits reflect the scope of IEC 61800-1 and IEC 61800-2.
NOTE 3 For adjustable speed electrical PDS not covered by the scope of this document, applicable requirements
of other standards, for example IEC 62477-1 and IEC 62477-2, can be used.
This document also applies to PDS which intentionally emit or receive radio waves for the
purpose of radio communication.
Motors for driven equipment (see Figure 1) are covered by IEC 60034 (all parts).
NOTE 4 In some cases, safety requirements of the PDS (for example, protection against access to hazardous parts)
can necessitate the use of special components and/or additional measures.

  • Standard
    446 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62477-1:2024(Main)
Safety requirements for power electronic converter systems and equipment - Part 1: General (IEC 62477-1:2022)
EN IEC 62477-1:2023

This part of IEC 62477 applies to power electronic converter systems (PECS), any specified
accessories, and their components for electronic power conversion and electronic power
switching, including the means for their control, protection, monitoring and measurement, such
as with the main purpose of converting electric power, with rated system voltages not exceeding
1 000 V AC or 1 500 V DC.
This document also applies to PECS which intentionally emit or receive radio waves for the
purpose of radio communication.
This document can also be used as a reference standard for product committees producing
product standards for:
• adjustable speed electric power drive systems (PDS);
• standalone uninterruptible power systems (UPS);
• low voltage stabilized DC power supplies;
• bidirectional power converters.
For PECS and their specified accessories for which no product standard exists, this document
provides minimum requirements for safety aspects.
This document has the status of a group safety publication in accordance with IEC Guide 104
for power electronic converter systems for solar, wind, tidal, wave, fuel cell or similar energy
sources.
According to IEC Guide 104, one of the responsibilities of technical committees is, wherever
applicable, to make use of basic safety publications and/or group safety publications in the
preparation of their product standards.
Guidance for use of this group safety publication for product committees is given in Annex S.
This document
• establishes a common terminology for safety aspects relating to PECS,
• establishes minimum requirements for the coordination of safety aspects of interrelated
parts within a PECS,
• establishes a common basis for minimum safety requirements for the PECS portion of
products that contain PECS,
• specifies requirements to reduce risks of fire, electric shock, thermal, energy and
mechanical hazards, during use and operation and, where specifically stated, during service
and maintenance, and
• specifies minimum requirements to reduce risks with respect to PECS designed as
pluggable and permanently connected equipment, whether it consists of a system of
interconnected units or independent units, subject to installing, operating and maintaining
the PECS in the manner prescribed by the manufacturer.
This document does not cover
• telecommunications apparatus other than power supplies to such apparatus,
• functional safety aspects as covered by, for example, IEC 61508 (all parts), and
• electrical equipment and systems for railways applications and electric vehicles.

  • Standard
    257 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61800-3:2024(Main)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools (IEC 61800-3:2022)
EN IEC 61800-3:2023

IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings.
As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM).
Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded.
This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow.
This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements.
This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified.
This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
>extension of the scope to machine tools with one or more embedded PDS ;
>extension of the frequency range for radiated immunity tests to 6 GHz;
>general updates in the normative part and the informative annexes

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62751-2:2014/A2:2024(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters (IEC 62751-2:2014/AMD2:2023)
EN 62751-2:2014/A2:2023
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62927:2018/A1:2023(Amendment)
Amendment 1 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing (IEC 62927:2017/AMD1:2023)
EN 62927:2017/A1:2023
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60700-3:2023(Main)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 3: Essential ratings (limiting values) and characteristics
EN IEC 60700-3:2023

This part of IEC 60700 specifies the service conditions, the definitions of essential ratings and characteristics of thyristor valves utilized in line commutated converters with three-phase bridge connections to realize the conversion from AC to DC and vice versa for high voltage direct current (HVDC) power transmission applications. It is applicable for air insulated, liquid cooled and indoor thyristor valves.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62751-1:2014/A2:2022(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 62751-1:2014/AMD2:2022)
EN 62751-1:2014/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60700-1:2015/A1:2022(Amendment)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015/AMD1:2021)
EN 60700-1:2015/A1:2021

No scope available

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50171:2022(Main)
Central safety power supply systems
EN 50171:2021

This European Standard specifies the general requirements for central power supply systems for an independent energy supply to essential safety equipment. This standard covers systems that are permanently connected to AC supply voltages not exceeding 1 000 V and use batteries as an alternative power source.
Central safety power supply systems are intended to ensure energy supply to emergency escape lighting in the event of normal supply failure and may be suitable for energising other essential safety equipment, for example:
- electric circuits of automatic fire extinguishing installations;
- paging systems and signalling safety installations;
- smoke extraction equipment;
- carbon monoxide warning systems;
- special safety installations related to specific buildings, e.g. high-risk areas.
The power supply of CPS should be dedicated only to the essential safety equipment, and not for other typeof loads such as general purpose IT or industrial systems etc.
Combinations of the aforementioned safety equipment types and / or non-safety equipment loads are permitted together on the same central safety power supply system providing the availability for safety equipment loads is not impaired. A fault occurring in a circuit should not cause the interruption in any other circuit used to supply safety equipment.
Schematic representations of typical central safety power supply equipment are depicted in Clause 4.
Power supply systems for fire alarm equipment that are covered by EN 54 (series) are excluded.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day