iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1859:2009+A1:2013

(Main)

Chimneys - Metal chimneys - Test methods

Chimneys - Metal chimneys - Test methods

This European Standard describes test methods for metal chimney products.

Abgasanlagen - Metall-Abgasanlagen - Prüfverfahren

Diese Europäische Norm beschreibt Prüfverfahren für Bauteile für Metall-Abgasanlagen.

Conduits de fumée - Conduits de fumée métalliques - Méthodes d'essai

La présente Norme européenne spécifie les méthodes d’essai des composants de conduits de fumée métalliques.

Dimniki - Kovinski dimniki - Preskusne metode

Ta evropski standard določa preskusne metode za kovinske dimnike.

General Information

Status
Published
Publication Date
19-Jun-2013
ICS
91.060.40 - Chimneys, shafts, ducts
Technical Committee
POZ - Požarna varnost
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Apr-2013
Due Date
17-Jun-2013
Completion Date
20-Jun-2013
Directive
89/106/EEC - Construction products
Mandate
M/105 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on chimneys, flues and specific products
Ref Project
EN 1859:2009+A1:2013 - Chimneys - Metal chimneys - Test methods

Relations

Replaces
SIST EN 1859:2009 - Chimneys - Metal chimneys - Test methods
Effective Date
01-Sep-2013
Consolidates
SIST EN 1859:2009/kFprA1:2012 - Chimneys - Metal chimneys - Test methods
Effective Date
19-Jan-2023
Consolidates
SIST EN 1859:2009 - Chimneys - Metal chimneys - Test methods
Effective Date
19-Jan-2023
Consolidates
SIST EN 1859:2009/kFprA1:2012 - Chimneys - Metal chimneys - Test methods
Effective Date
18-Jan-2023
Consolidates
SIST EN 1859:2009 - Chimneys - Metal chimneys - Test methods
Effective Date
18-Jan-2023
Consolidates
SIST EN 1859:2009 - Chimneys - Metal chimneys - Test methods
Effective Date
08-Jun-2022
Revises
oSIST prEN 1856-1:2021 - Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Effective Date
19-Jan-2023
Revises
oSIST prEN 1856-1:2019 - Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Effective Date
19-Jan-2023
Revises
oSIST prEN 1856-1:2021 - Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Effective Date
18-Jan-2023
Revises
oSIST prEN 1856-1:2019 - Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Effective Date
18-Jan-2023
Revised
oSIST prEN 1856-1:2021 - Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Effective Date
17-Mar-2021
Revised
oSIST prEN 1856-1:2019 - Chimneys - Requirements for metal chimneys - Part 1: System chimney products
Effective Date
10-Apr-2019

Buy Standard

EN 1859:2009+A1:2013EN 1859:2009+A1:2013
PreviousNext
Standard
EN 1859:2009+A1:2013
English language
48 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dimniki - Kovinski dimniki - Preskusne metodeAbgasanlagen - Metall-Abgasanlagen - PrüfverfahrenConduits de fumée - Conduits de fumée métalliques - Méthodes d'essaiChimneys - Metal chimneys - Test methods91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:EN 1859:2009+A1:2013SIST EN 1859:2009+A1:2013en,fr,de01-september-2013SIST EN 1859:2009+A1:2013SLOVENSKI
STANDARDSIST EN 1859:20091DGRPHãþD



SIST EN 1859:2009+A1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1859:2009+A1
April 2013 ICS 91.060.40 Supersedes EN 1859:2009
English Version
Chimneys - Metal chimneys - Test methods
Conduits de fumée - Conduits de fumée métalliques - Méthodes d'essai
Abgasanlagen - Metall-Abgasanlagen - Prüfverfahren This European Standard was approved by CEN on 1 May 2009 and includes Amendment 1 approved by CEN on 24 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1859:2009+A1:2013: E SIST EN 1859:2009+A1:2013



EN 1859:2009+A1:2013 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Definitions .5 4 Test methods for metal chimney products .5 4.1 Compressive strength .5 4.1.1 Sections and Fittings .5 4.1.2 Chimney support .6 4.2 Tensile strength .6 4.2.1 Test assembly .6 4.2.2 Test procedure and results .6 4.3 Lateral strength .6 4.3.1 Fittings in non-vertical orientation .6 4.3.2 Wind load .7 4.4 Gas tightness .7 4.4.1 Test assembly .7 4.4.2 Procedure and results .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15287-2:2023(Main)
Chimneys - Design, installation and commissioning - Part 2: Chimneys and connecting flue pipes for room sealed combustion appliances
EN 15287-2:2023

This European Standard describes the method of specifying the design, installation and labelling criteria for chimney systems, construction of custom-built chimneys, the relining or converting of existing chimneys, connecting flue pipes and air supply pipes for roomsealed applications. It also gives information on commissioning of an installed chimney.
This European Standard applies to chimneys which are subject to the following limiting conditions (specified in EN 13084-1):
― the horizontal distance between the building and the outer wall of the chimney system not to
exceed 1 m,
― the distance between the supports not to exceed 4 m,
― the distance above the last structural attachment not to exceed 3 m.
This standard does not cover:
― chimneys which serve a mixture of fan assisted or forced draught burners or natural draught
appliances,
― installations having a configuration of the type C2.
NOTE Roomsealed gas appliances are classified as type C according to EN 1749.
The methods in this part of this European Standard are applicable to chimneys and connecting flue pipes for room sealed combustion appliances. The methods in Part 1 of this European Standard are applicable to chimneys and connecting flue pipes for non-room sealed combustion appliances.
For the purpose of this European Standard the term "installation" includes construction.

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    123 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15287-1:2023(Main)
Chimneys - Design, installation and commissioning - Part 1: Chimneys and connecting flue pipes for non-room sealed combustion appliances
EN 15287-1:2023

This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys.
This European Standard also deals with connecting flue pipes.
This European Standard does not apply to freestanding chimneys covered by EN 13084-1.
This European Standard excludes chimneys designated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances.
For the purpose of this European Standard the term "installation" includes construction.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-10:2022(Main)
Fire resistance tests for service installations - Part 10: Smoke control dampers
EN 1366-10:2022

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions.
It is of note that the smoke control damper to be tested could require testing to EN 1366 2 and that this is for consideration before carrying out these tests.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101 8 are met and EN 12101 8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501 4 and this document is expected to be considered before carrying out these tests.
To this end, this document is expected to be read in conjunction with EN 12101 8, EN 13501 4, EN 1366 2 and EN 1363 1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366 8 and EN 1366 9.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15882-2:2022(Main)
Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers
EN 15882-2:2022

This document provides guidance and rules to notified bodies (for fire dampers) allowing them to produce/validate an extended field of application report for fire dampers. This document identifies the parameters that affect the fire resistance of dampers. It also identifies the factors that need to be considered when deciding whether, or by how much, the parameter can be extended when contemplating the fire resistance performance of an untested, or untestable variation in the construction.
This document explains the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved.
This document does not cover dampers used for smoke control.
It is the intention that the application of this document makes it possible to identify which specifications to test to maximize the field of application. Some information on test programmes is given for guidance purposes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-5:2021(Main)
Fire resistance tests for service installations - Part 5: Service ducts and shafts
EN 1366-5:2021

This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside and from inside the duct. This European Standard is intended to be read in conjunction with EN 1363-1.
This European Standard does not examine the risk of fire spread as a result of thermal conduction along the piping installed in service ducts or shafts, or thermal conduction through the media these pipes carry. It does not cover the risk of damage produced by thermal elongation or shortening of tubes and cables as a result of fire, or damaged pipe suspensions. This European Standard does not give guidance on how to test one, two or three sided service ducts or shafts.
NOTE   Guidance on testing service ducts and shafts of less than four sides will be covered in the extended field of application rules being developed by CEN/TC 127.
This test is unsuitable for evaluating service ducts with internal barriers at walls and floors.
Whilst the walls of service ducts or shafts tested to this method may provide specified levels of integrity or insulation, testing to this European Standard does not replace the testing of the functional endurance of small electrical cables which is covered in EN 50200.
Fire resistance testing of ducts for air distribution systems is covered in EN 1366-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-7:2016+A1:2020(Main)
Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods
EN 16475-7:2016+A1:2020

This European Standard specifies requirements and test methods for rain caps that are used as components, subject to flue gas, in order to prevent rain entry into the chimneys. Rain caps already tested together with system chimney products or other chimney components, e.g. terminals, are not covered by this standard. Rain caps incorporating a bird guard are also included. It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-1:2014+A1:2020(Main)
Fire resistance tests for service installations - Part 1: Ventilation ducts
EN 1366-1:2014+A1:2020

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
Annex A provides general guidance and gives background information.
This European Standard is not applicable to:
a)   ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall(where ducts are located in cavities enclosed by fire-resistant shafts or ceilings);
b)   ducts containing fire dampers at points where they pass through fire separations;
c)   one, two or three sided ducts;
d)   fixing of suspension devices (e.g. anchors) to floors or walls.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-4:2020(Main)
Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods
EN 16475-4:2020

This European standard specifies the requirements and test methods for flue dampers that are used as
components, carrying flue gas, in order to limit the flow in a chimney.
Flue dampers may be manually adjusted, sited in connecting flue pipes or chimneys, in order to reduce the burning rate (solid fuel stoves/fireplaces) or to work as a shut-off slide preventing back flow of soot during cleaning of the chimney, or mechanically driven for reducing/closing the flue, in order to reduce the Stand-by losses or to prevent the backflow of the flue gas e.g. in case of multi-served chimneys.
This European standard covers only flue dampers incorporated in a housing and installed inside a building. Flue dampers already tested together with system chimney products or other chimney components, e.g. flue liners, connecting flue pipes, are not covered by this standard.
This European standard also specifies the requirements for marking, manufacturers’ instruction, product
information, Assessment and Verification of Constancy of Performance (AVCP), cleaning and maintenance.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-1:2020(Main)
Chimneys - Accessories - Part 1: Chimney silencers - Requirements and test methods
EN 16475-1:2020

This European Standard specifies requirements and test methods for flue gas silencers made of metal that are used as accessories in order to reduce the noise level of combustions appliances.
The standard covers silencers in the connecting flue pipes and on top of chimneys.
This standard does not cover silencers installed as chimney sections. This standard excludes active silencers.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-6:2020(Main)
Chimneys - Accessories - Part 6: Access components - Requirements and test methods
EN 16475-6:2020

This European Standard specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The standard is limited to access components with a door opening area up to 0,27 m2.
Products not freely ventilated are excluded from this standard.
This standard also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.
Access components already tested together with system chimney products or other chimney components, e.g. flue liners, are not covered by this standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day