SIST EN 1205:2005
(Main)Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen pyrophosphate
Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen pyrophosphate
This document is applicable to disodium dihydrogen pyrophosphate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding test methods for disodium dihydrogen pyrophosphate. It gives information on its use in water treatment.
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Dinatriumdihydrogendiphosphat
Dieses Dokument gilt für Dinatriumdihydrogendiphosphat zur Aufbereitung von Wasser für den menschlichen
Gebrauch. Es beschreibt die Eigenschaften von Dinatriumdihydrogendiphosphat und legt die Anforderungen
sowie die entsprechenden Prüfverfahren für Dinatriumdihydrogendiphosphat fest. Es gibt Informationen für die
Anwendung von Dinatriumdihydrogendiphosphat in der Wasseraufbereitung.
Produits chimiques utilisés pour le traitement de l'eau destinée a la consommation humaine - Dihydrogénopyrophosphate de sodium
Le présent document est applicable au dihydrogénopyrophosphate de sodium utilisé pour le traitement de
l?eau destinée a la consommation humaine. Il décrit les caractéristiques et spécifie les exigences et les
méthodes d?essai correspondantes du dihydrogénopyrophosphate de sodium. Il donne des informations pour
son emploi dans le traitement de l?eau.
Kemikalije, ki se uporabljajo za pripravo pitne vode – Natrijev dihidrogen difosfat (V) (Na2H2P2O7)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode – Natrijev dihidrogen difosfat (V) (Na2H2P2O7)Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - DinatriumdihydrogendiphosphatProduits chimiques utilisés pour le traitement de l'eau destinée a la consommation humaine - Dihydrogénopyrophosphate de sodiumChemicals used for treatment of water intended for human consumption - Disodium dihydrogen
pyrophosphate71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 1205:2005SIST EN 1205:2005en01-julij-2005SIST EN 1205:2005SLOVENSKI
STANDARDSIST EN 1205:19991DGRPHãþD
SIST EN 1205:2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1205
March 2005 ICS 71.100.80 Supersedes EN 1205:1997 English version
Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen
pyrophosphate
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Dihydrogénopyrophosphate de sodium
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - DinatriumdihydrogendiphosphatThis European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1205:2005: ESIST EN 1205:2005
EN 1205:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Description.6 4 Purity criteria.7 5 Test methods.9 6 Labelling - Transportation - Storage.13 Annex A (informative)
General information on disodium dihydrogen pyrophosphate.15 Bibliography.17
SIST EN 1205:2005
EN 1205:2005 (E) 3 Foreword This document (EN 1205:2005) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the latest by September 2005. This document supersedes EN 1205:1997. Significant technical differences between this edition and EN 1205:1997 are as follows: a) deletion of the reference to EU Directive 80/778/EEC of July, 15 1980 in order to take into account of the last Directive in force (see [1]); b) replacement of ISO 5666-1 by EN 1483 and of
EN 26595 by EN ISO 11969. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1205:2005
EN 1205:2005 (E) 4 Introduction In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this document: a) this document provides no information as to whether the product may be used without restriction in any of the Member States of the EU or EFTA; b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force. NOTE Conformity with this document does not confer or imply acceptance or approval of the product in any of the Member States of the EU or EFTA. The use of the product covered by this document is subject to regulation or control by National Authorities.
SIST EN 1205:2005
EN 1205:2005 (E) 5 1 Scope This document is applicable to disodium dihydrogen pyrophosphate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding test methods for disodium dihydrogen pyrophosphate. It gives information on its use in water treatment. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references the latest edition of the referenced document (including any amendments) applies. EN 1483, Water quality – Determination of mercury. EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696: 1987). EN ISO 5961, Water quality – Determination of cadmium by atomic absorption spectrometry (ISO 5961:1994). EN ISO 11885, Water quality – Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996). EN ISO 11969, Water quality
– Determination of arsenic- Atomic absorption spectrometric method (hydride technique(ISO 11969:1996)). ISO 2997, Phosphoric acid for industrial use – Determination of sulfate content - Method by reduction and titrimetry. ISO 3165, Sampling of chemical products for industrial use – Safety in sampling. ISO 3357, Sodium tripolyphosphate and sodium pyrophosphate for industrial use Determination of total phosphorus (V) oxide content – Quinoline phosphomolybdate gravimetric method. ISO 3360, Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) – Determination of fluorine content – Alizarin complexone and lanthanum nitrate photometric method. ISO 6206, Chemical products for industrial use – Sampling – Vocabulary. ISO 6703-1, Water quality - Determination of cyanide – Part 1: Determination of total cyanide. ISO 8213, Chemical products for industrial use – Sampling techniques – Solid chemical products in the form of particles varying from powders to coarse lumps. ISO 8288, Water quality – Determination of cobalt, nickel, copper, zinc, cadmium and lead – Flame atomic absorption spectrometric methods. ISO 9174, Water quality – Determination of chromium – Atomic absorption spectrometric methods. ISO 9965, Water quality – Determination of selenium - Atomic absorption spectrometric method (hydride technique). SIST EN 1205:2005
EN 1205:2005 (E) 6 3 Description 3.1 Identification 3.1.1 Chemical name Disodium dihydrogen pyrophosphate. 3.1.2 Synonyms or common names Sodium acid pyrophosphate, SAPP. 3.1.3 Relative molecular mass 222,0. 3.1.4 Empirical formula Na2H2P2O7. 3.1.5 Chemical formula Na2H2P2O7. 3.1.6 CAS Registry Number 1) 7758-16-9. 3.1.7 EINECS reference 2)
231-835-0. 3.2 Commercial forms The disodium dihydrogen pyrophosphate is available in a number of different forms (see 3.3.1). Different commercial forms, solids or dissolved in water are possible. All concentrations mentioned refer to the active matter and shall be calculated accordingly. NOTE Disodium dihydrogen pyrophosphate can be a component of mixtures sold for water treatment purposes. 3.3 Physical properties 3.3.1 Appearance Solid : the product is a white powder. Liquid :the product is a clear solution. 3.3.2 Density Solid : the bulk density of the product is equal to 900 g/dm3.
1) Chemical Abstracts Service Registry Number 2) European Inventory of Existing Commercial Chemical Substances. SIST EN 1205:2005
EN 1205:2005 (E) 7 Liquid : the density of solution is 1,040 g/ml for a product concentration of 50 g/l at 20 °C. 3.3.3 Solubility in water The solubility in water is approximately 130 g/l at 25 °C. 3.3.4 Vapour pressure Not applicable. 3.3.5 Boiling point at 100kPa 3)
Not applicable. 3.3.6 Melting point For the solid product 650 °C. 3.3.7 Specific heat Not known. 3.3.8 Viscosity (dynamic) For the solid product it is not applicable. For the liquid the viscosity is equal to 5 mPa.s for a product concentration of 50 g/l. 3.3.9 Critical temperature Not applicable. 3.3.10 Critical pressure Not applicable. 3.3.11 Physical hardness Not applicable. 3.4 Chemical properties The solutions of disodium dihydrogen pyrophosphate have acidic reactions. The pH value of a solution of a mass fraction of 1 %
is approximately 4,0. 4 Purity criteria 4.1 General This document specifies the minimum purity requirements for disodium dihydrogen pyrophosphate used for treatment of water intended for human consumption. Limits are given for impurities commonly present in the product. Depending on the raw material and the manufacturing process other impurities may be present and, if so, this shall be notified to the user and when necessary to relevant authorities.
3) 100 kPa = 1 bar. SIST EN 1205:2005
EN 1205:2005 (E) 8 NOTE Users of this product should check the national regulations in order to clarify whether it is of appropriate purity for treatment of water intended for human consumption, taking into account raw water quality, required dosage, contents of other impurities and additives used in the product not stated in this document. Limits have been given for impurities and chemical parameters where these are likely to be present in significant quantities from the current production process and raw materials. If the production process or raw materials lead to significant quantities of impurities, by-products or additives being present, this shall be notified to the user. 4.2 Composition of commercial product The product shall conform to the following requirements on a dry mass basis: phosphate content expressed as P2O5 : mass fraction of (64 ± 1,0) %; sodium content expressed as Na2O : mass fraction of (28 ± 0,5) %. 4.3 Impurities and main by-products The product shall conform to the requirements specified in table 1. Table 1 — Impurities Impurity
Limit
mg/kg of dry product Sulfate (SO42-) max. 500 Fluoride (F-) max.
10 4.4 Chemicals parameters Content of various chemical parameters depends on the origin of the raw materials, most of these elements are present only as traces. The product shall conform to the requirements specified in Table 2. SIST EN 1205:2005
EN 1205:2005 (E) 9 Table 2 – Chemical parameters
Parameter
Limit
mg/kg of dry product Antimony (Sb) max. 3 Arsenic (As) max. 3 Cadmium (Cd) max. 3 Chromium (Cr) max. 10 Cyanide (CN) max. 5 Lead (Pb) max. 10 Mercury (Hg) max. 1 Nickel (Ni) max. 10 Selenium (Se) max. 3 NOTE Pesticides and polycyclic a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.