SIST EN 14847:2006

Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture

This European Standard specifies the following dimensions of tinplate metal aerosol cans with 25,4 mm aperture: contact height, outside diameter, inside diameter and shoulder height. It is intended to be used with EN 14848 for clinching with valve cups.

Aerosolverpackungen - Behälter aus Weißblech - Maße der 25,4 mm weiten Öffnung

Diese Europäische Norm legt folgende Maße von Aerosolbehältern aus Weißblech mit einer Öffnung von
25,4 mm fest: Kontakthöhe, Außendurchmesser, Innendurchmesser und Schulterhöhe. Diese Norm ist zu-
sammen mit EN 14848 für Clinchung mit Ventilträgern anzuwenden.

Récipients pour aérosols - Récipients en fer blanc - Dimensions des boîtiers avec ouverture de 25,4 mm

La présente norme européenne spécifie les dimensions suivantes des boîtiers métalliques pour aérosols en fer blanc caractérisés par une ouverture de 25,4 mm : la hauteur de contact, le diametre extérieur, le diametre intérieur et la hauteur d’épaule. Elle est destinée a etre utilisée conjointement avec l’EN 14848 relatif au serrage a l’aide de coupelles de valves

Embalaža za aerosole – Posode iz bele pločevine – Mere za 25,4-milimetrsko odprtino

General Information

• Status: Published
• Publication Date: 31-Jan-2006
• ICS: 55.130 - Aerosol containers
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2006
• Due Date: 01-Feb-2006
• Completion Date: 01-Feb-2006
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN 14847:2005 - Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14847:2006
01-februar-2006
(PEDODåD]DDHURVROH±3RVRGHL]EHOHSORþHYLQH±0HUH]DPLOLPHWUVNR
RGSUWLQR
Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture
Aerosolverpackungen - Behälter aus Weißblech - Maße der 25,4 mm weiten Öffnung
Récipients pour aérosols - Récipients en fer blanc - Dimensions des boîtiers avec
ouverture de 25,4 mm
Ta slovenski standard je istoveten z: EN 14847:2005
ICS:
55.130 3ORþHYLQNH]DDHURVROH Aerosol containers
SIST EN 14847:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14847:2006

---------------------- Page: 2 ----------------------

SIST EN 14847:2006
EUROPEAN STANDARD
EN 14847
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 55.130

English Version
Aerosol containers - Tinplate containers - Dimensions of the
25,4 mm aperture
Récipients pour aérosols - Récipients en fer blanc - Aerosolpackungen - Behälter aus Weißblech - Maße der
Dimensions des boîtiers avec ouverture de 25,4 mm (un 25,4 mm (ein Zoll) weiten Öffnung
pouce)
This European Standard was approved by CEN on 14 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14847:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14847:2006
EN 14847:2005 (E)
Contents
Foreword .3
Introduction.4
1 Scope .5
2 Normative references .5
3 Requirements for specifying and measuring.5
3.1 Dimensions of the 25,4 aperture.5
3.2 Contact height.6
3.3 Outside diameter.6
3.4 Inside diameter.6
3.5 Measurement of shoulder height.7
Bibliography.8


2

---------------------- Page: 4 ----------------------

SIST EN 14847:2006
EN 14847:2005 (E)
Foreword
This document (EN 14847:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by
May 2006.
This draft European Standard is one of a series of thirteen related standards with the following titles:
EN 14847, Aerosol containers — Tinplate containers — Dimensions of the 25,4 mm aperture.
EN 14848, Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups.
EN 14849, Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules.
EN 14850, Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height.
EN 14851, Aerosol containers — Aerosol foam flammability test.
EN 14852, Aerosol co
...