Hand-held motor-operated electric tools - Safety -- Part 2-14: Particular requirements for planers

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for planners. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-14: Besondere Anforderungen für Hobel

Outils électroportatifs à moteur - Sécurité -- Partie 2-14: Règles particulières pour les rabots

Traite de la sécurité des outils dont la tension assignée n'est pas supérieure à 250 V en courant  monophasé alternatif ou courant continu et 440 V en courant alternatif triphasé. Complète ou modifie les articles correspondants de la CEI 60745-1.

Varnost električnih ročnih orodij - 2-14. del: Posebne zahteve za skobeljnike (IEC 60745-2-14:2003; spremenjen)

General Information

Status
Withdrawn
Publication Date
29-Feb-2004
Withdrawal Date
10-Nov-2009
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Oct-2009
Due Date
15-Nov-2009
Completion Date
11-Nov-2009

Relations

Buy Standard

Standard
SIST EN 60745-2-14:2004
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-14:2004
01-marec-2004
1DGRPHãþD
SIST EN 50144-2-14:2002

9DUQRVWHOHNWULþQLKURþQLKRURGLMGHO3RVHEQH]DKWHYH]DVNREHOMQLNH ,(&

VSUHPHQMHQ

Hand-held motor-operated electric tools - Safety -- Part 2-14: Particular requirements for

planers

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-14: Besondere

Anforderungen für Hobel

Outils électroportatifs à moteur - Sécurité -- Partie 2-14: Règles particulières pour les

rabots
Ta slovenski standard je istoveten z: EN 60745-2-14:2003
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
79.120.20 Lesnoobdelovalno orodje Woodworking tools
SIST EN 60745-2-14:2004 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60745-2-14
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003
ICS 25.140.20 Supersedes EN 50144-2-14:2001
English version
Hand-held motor-operated electric tools -
Safety
Part 2-14: Particular requirements for planers
(IEC 60745-2-14:2003, modified)
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité Elektrowerkzeuge -
Partie 2-14: Règles particulières Sicherheit
pour les rabots Teil 2-14: Besondere Anforderungen
(CEI 60745-2-14:2003, modifiée) für Hobel
(IEC 60745-2-14:2003, modifiziert)

This European Standard was approved by CENELEC on 2003-07-01. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,

Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60745-2-14:2003 E
---------------------- Page: 2 ----------------------
EN 60745-2-14:2003 - 2 -
Foreword

The text of the International Standard IEC 60745-2-14:2003 prepared by SC 61F, Safety of hand-held

motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical appliances,

together with the common modifications prepared by the Technical Committee CENELEC TC 61F,

Safety of hand-held and transportable motor-operated electric tools was submitted to the formal vote and

was approved by CENELEC as EN 60745-2-14 on 2003-07-01.
This European Standard supersedes EN 50144-2-14:2001.
The following dates were fixed:
- latest date by which the EN has to be im
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.