iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1993-1-2:2005/A101:2007

(Slovenian language)

Eurocode 3: Design of steel structures – Part 1-2: General rules – Structural fire design -National annex

Eurocode 3: Design of steel structures – Part 1-2: General rules – Structural fire design -National annex

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-2: Allgemeine Regeln - Tragwerksbemessung für den Brandfall -

Eurocode 3 - Calcul des structures en acier - Partie 1-2 : Regles générales - Calcul du comportement au feu -

Evrokod 3: Projektiranje jeklenih konstrukcij – 1-2. del: Splošna pravila – Požarnoodporno projektiranje – Nacionalni dodatek

Ta nacionalni dodatek vsebuje podatke o nacionalno določenih parametrih, izbiri med alternativnimi postopki projektiranja in o statusu dodatkov, ki jih je treba pri uporabi
SIST EN 1993-1-2:2005 upoštevati v Sloveniji.
Za vsa mesta, kjer je dovoljena nacionalna izbira, razen glede statusa dodatkov, so v
SIST EN 1993-1-2:2005 podane opombe, seznam točk s temi opombami pa je naveden v predgovoru k SIST EN 1993-1-2:2005.

General Information

Status
Published In Revision
ICS
13.220.50 - Fire-resistance of building materials and elements
91.010.30 - Technical aspects
91.080.13 - Steel structures
Technical Committee
KON - Structures
Current Stage
9800 - Izvirni SIST/ privzeti tuji dokument - Periodični pregled (Local Project)
Start Date
15-Dec-2011
Due Date
26-Feb-2012
Completion Date
07-Nov-2013
Directive
TP001 - Pravilnik o mehanski odpornosti in stabilnosti objektov
TP237 - Pravilnik o spodnjem ustroju železniških prog
Ref Project

Buy Standard

EN 1993-1-2:2005/A101:2007EN 1993-1-2:2005/A101:2007
PreviousNext
National annex
EN 1993-1-2:2005/A101:2007
Slovenian language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 1993-1-2:2005/oA101:2006EN 1993-1-2:2005/oA101:2006
PreviousNext
Draft
EN 1993-1-2:2005/oA101:2006
Slovenian language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

6/29(16.,6,67(1$67$1'$5'RNWREHU(YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM±GHO6SORãQDSUDYLOD±3RåDUQRRGSRUQRSURMHNWLUDQMH±1DFLRQDOQLGRGDWHN(XURFRGH'HVLJQRIVWHHOVWUXFWXUHV±3DUW*HQHUDOUXOHV±6WUXFWXUDOILUHGHVLJQ(XURFRGH&DOFXOGHVVWUXFWXUHVHQDFLHU±3DUWLH5qJOHVJpQpUDOHV±&DOFXOGXFRPSRUWHPHQWDXIHX(XURFRGH%HPHVVXQJXQG.RQVWUXNWLRQYRQ6WDKOEDXWHQ±7HLO$OOJHPHLQH5HJHOQ±7UDJZHUNVEHPHVVXQJIUGHQ%UDQGIDOO !! "#%$'&)(*
+,-+./012!/354678()97:;<:=>6?@2BACDFE


6,67(1$1$&,21$/1,892''RSROQLOR6,67(1$VO(YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM±GHO6SORãQDSUDYLOD±3RåDUQRRGSRUQRSURMHNWLUDQMH±1DFLRQDOQLGRGDWHNLPDVWDWXVGRSROQLODNVWDQGDUGX6,67(11$&,21$/1,35('*29256ORYHQVNLQDFLRQDOQLVWDQGDUG6,67(1MHSULY]HWHYURSVNLVWDQGDUG(1NLJDMHSULSUDYLOWHKQLþQLRGERU(YURSVNHJDNRPLWHMD]DVWDQGDUGL]DFLMR&(17&.RQVWUXNFLMVNLHYURNRGLNDWHUHJDWDMQLãWYRMHYSULVWRMQRVWL%6,'RSROQLOR6,67(1$MHSULSUDYLOWHKQLþQLRGERU6,677&.21.RQVWUXNFLMH7RGRSROQLORVHODKNRXSRUDEOMDVNXSDMVVWDQGDUGRP6,67(1R]LURPD(1NLYSRJODYMX1DFLRQDOQLGRGDWHNQDWDQþQRGRORþDSRJODYMD]DQDFLRQDOQRL]ELURDFLRQDOQDL]ELUDMHY(1GRYROMHQDY±±±±±DFLRQDOQLGRGDWHNYVHEXMHDOWHUQDWLYQHSRVWRSNHYUHGQRVWLLQSULSRURþLOD]DUD]UHGH]RSRPEDPLNLNDåHMRNMHHYURSVNLVWDQGDUGSUHGYLGHYDGDVHODKNRXYHOMDYLQDFLRQDOQDL]ELUD=DWRGRSROQLOR6,67(1$YVHEXMHQDFLRQDOQRGRORþ
...



6/29(16., 6,67(1R$


67$1'$5'
PDUHF
  




    
    
    
    
 


(YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM±GHO6SORãQDSUDYLOD

±3RåDUQRRGSRUQRSURMHNWLUDQMH±1DFLRQDOQLGRGDWHN


 (XURFRGH'HVLJQRIVWHHOVWUXFWXUHV±3DUW*HQHUDOUXOHV±6WUXFWXUDOILUH
 GHVLJQ

 (XURFRGH&DOFXOGHVVWUXFWXUHVHQDFLHU±3DUWLH5qJOHVJpQpUDOHV±
 &DOFXOGXFRPSRUWHPHQWDXIHX

 (XURFRGH%HPHVVXQJXQG.RQVWUXNWLRQYRQ6WDKOEDXWHQ±7HLO$OOJHPHLQH
 5HJHOQ±7UDJZHUNVEHPHVVXQJIUGHQ%UDQGIDOO

 
 












 
 



 
 5HIHUHQþQDR]QDND
 ,&6  6,67(1R$ VO 
 

 1DGDOMHYDQMHQDVWUDQHKLQ
 


������������������������������������������������������������� �������!��"�#��$%����&’����(��������)"��!�������������*��������+���,�������������� ���-���*���������"�����#�

---------------------- Page: 1 ----------------------
6,67(1R$
1$&,21$/1,892'
'RSROQLOR6,67(1$ VO (YURNRG3URMHNWLUDQMHMHNOHQLKNRQVWUXNFLM±GHO
6SORãQDSUDYLOD±3RåDUQRRGSRUQRSURMHNWLUDQMH±1DFLRQDOQLGRGDWHNLPDVWDWXVGRSROQLODN
VWDQGDUGX6,67(1

1$&,21$/1,35('*2925
6ORYHQVNLQDFLRQDOQLVWDQGDUG6,67(1MHSULY]HWHYURSVNLVWDQGDUG(1NL
JD MH SULSUDYLO WHKQLþQL RGERU (YURSVNHJDNRPLWHMD]DVWDQGDUGL]DFLMR&(17&.RQVWUXNFLMVNL
HYURNRGLNDWHUHJDWDMQLãWYRMHYSULVWRMQRVWL%6,
'RSROQLOR6,67(1$MHSULSUDYLOWHKQLþQLRGERU6,677&.21.RQVWUXNFLMH
7R GRSROQLOR VH ODKNR XSRUDEOMD VNXSDM V VWDQGDUGRP 6,67 (1  R]LURPD
(1NLYSRJODYMX1DFLRQDOQLGRGDWHNQDWDQþQRGRORþDSRJODYMD]DQDFLRQDOQRL]ELUR

1DFLRQDOQDL]ELUDMHY(1GRYROMHQDY
   
   
   
   
   

1DFLRQDOQLGRGDWHNYVHEXMHDOWHUQDWLYQHSRVWRSNHYUHGQRVWLLQSULSRURþLOD]DUD]UHGH]RSRPEDPLNL
NDåHMR NMH HYURSVNL VWDQGDUG SUHGYLGHYD GD VH ODKNR XYHOMDYL QDFLRQDOQD L]ELUD =DWR GRSROQLOR
6,67(1$
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
oSIST prEN 1993-1-2:2022(Main)
Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
FprEN 1993-1-2

1.1   Scope of prEN 1993-1-2
(1) This document provides rules for the design of steel structures for the accidental situation of fire exposure. This Part of EN 1993 only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to steel structures required to fulfil a loadbearing function.
(3) This document does not include rules for separating function.
(4) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(5) This document applies to structures, or parts of structures, that are within the scope of EN 1993 1 1 and are designed accordingly.
(6) This document is intended to be used in conjunction with EN 1991-1-2, EN 1993-1-1, EN 1993 1-3, EN 1993-1-4, EN 1993-1-5, EN 1993-1-6, EN 1993-1-7, EN 1993-1-8, EN 1993-1-11, EN 1993-1-13 or EN 1993-1-14.
1.2   Assumptions
(1) Unless specifically stated, EN 1990, EN 1991(all parts) and EN 1993-1-1 apply.
(2) The design methods given in prEN 1993-1-2 are applicable if
-   the execution quality is as specified in EN 1090-2 and/or EN 1090-4, and
-   the construction materials and products used are as specified in prEN 1993-1-1:2020, Table 5.1 and Table 5.2 and in prEN 1993-1-3:2022, Table 5.1 and Table 5.2, or in the relevant material and product specifications.
(3) In addition to the general assumptions of EN 1990 the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 1993-1-2:2022(Main)
Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
FprEN 1993-1-2

1.1   Scope of prEN 1993-1-2
(1) This document provides rules for the design of steel structures for the accidental situation of fire exposure. This Part of EN 1993 only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to steel structures required to fulfil a loadbearing function.
(3) This document does not include rules for separating function.
(4) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(5) This document applies to structures, or parts of structures, that are within the scope of EN 1993 1 1 and are designed accordingly.
(6) This document is intended to be used in conjunction with EN 1991-1-2, EN 1993-1-1, EN 1993 1-3, EN 1993-1-4, EN 1993-1-5, EN 1993-1-6, EN 1993-1-7, EN 1993-1-8, EN 1993-1-11, EN 1993-1-13 or EN 1993-1-14.
1.2   Assumptions
(1) Unless specifically stated, EN 1990, EN 1991(all parts) and EN 1993-1-1 apply.
(2) The design methods given in prEN 1993-1-2 are applicable if
-   the execution quality is as specified in EN 1090-2 and/or EN 1090-4, and
-   the construction materials and products used are as specified in prEN 1993-1-1:2020, Table 5.1 and Table 5.2 and in prEN 1993-1-3:2022, Table 5.1 and Table 5.2, or in the relevant material and product specifications.
(3) In addition to the general assumptions of EN 1990 the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE   This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61340-2-3:2016/AC:2023(Corrigendum)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)
EN 61340-2-3:2016/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14002-2:2023(Main)
Environmental management systems - Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area - Part 2: Water (ISO 14002-2:2023)
EN ISO 14002-2:2023

This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017

IEC 60050-811:2017 gives the general terminology relating to electric traction used in electrical equipment and systems for railways, as well as general terms pertaining to specific applications and associated technologies. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    626 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    612 pages
    English and French language
    sale 15% off
SIST
SIST EN IEC 60721-3-4:2019/AC:2023(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations (IEC 60721-3-4:2019/COR1:2023)
EN IEC 60721-3-4:2019/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day